1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

Supreme Vaporizer 4

Discussion in 'Plug-in Vaporizers' started by biohacker, Feb 8, 2018.

  1. CABtheFISHKING

    CABtheFISHKING CAB

    Messages:
    46
    Location:
    At sea
    Its 200$ and it doesn't come with a controller or coil
     
  2. Maninthemachine

    Maninthemachine Active Member

    Messages:
    136
    Thanks friend. Are you able to use the 4/6 torch style or is strictly electronic?
     
  3. LAWTHEONE

    LAWTHEONE Well-Known Member

    Messages:
    96
    You have to verify it with Ed but I’m pretty sure he said this one can’t be torched.
     
  4. Maninthemachine

    Maninthemachine Active Member

    Messages:
    136
    Gotcha. You referring to the ,4th ?
     
  5. Abysmal Vapor

    Abysmal Vapor Shaman of The Pyramid of Orlin'Malah

    Messages:
    3,891
    Location:
    7th heaven - 666th pit (EU)
    :D So V6 is still aluminum.. Hopefully someday Supreme will make it to Titanium or Stainless.. :))
    And yes it looks like a the bastard child of Jcats mod.. :D

    Hmm Are you talking Fahrenheit or Celsius ? Hmm now that Supreme is no longer torch-driven might it be that the maker have changed the Gopel from claiming it is Safe to blast it with 1200 C torch (2300+ F ?!?) to not go over 800 F? Or is that unsafe just for the welds,not for the user ?
     
    Last edited: Apr 30, 2019
    lazylathe and LAWTHEONE like this.
  6. LAWTHEONE

    LAWTHEONE Well-Known Member

    Messages:
    96
    Yes the Supreme 4. Something about the welds being compromised without regulated heat. I think he said the aluminum is good under 1300° but he doesn’t recommend going over 800°. I run mine anywhere between 475° to 600° depending on the situation and how much effects I want.

    I did my first dab in this this weekend and it was phenomenal!
     
    Last edited: Apr 30, 2019
  7. CABtheFISHKING

    CABtheFISHKING CAB

    Messages:
    46
    Location:
    At sea
    My V6 had landed. I've had it for an hour and I'm already melted. Also found out that the pipes and WPAs for the Lotus butane vape are compatible with this. I'll be posting vids to reddit as soon as I get the chance.
     
    LAWTHEONE likes this.
  8. LAWTHEONE

    LAWTHEONE Well-Known Member

    Messages:
    96
  9. lazylathe

    lazylathe Almost there...

    Messages:
    4,129
    Location:
    SouthWest Ontario, Canada
    Here are the Supreme Version 6 pictures!
    Hopefully viewable by everyone thus time...

    [​IMG]

    [​IMG]

    [​IMG]

    I asked Ed some questions regarding any improvement over the V4 and if so what they are.
    Seems to be a more vertical Supreme heater.
     
    Easywider, Azn2101, mixchu69 and 3 others like this.
  10. lazylathe

    lazylathe Almost there...

    Messages:
    4,129
    Location:
    SouthWest Ontario, Canada
    Just heard back from Ed.
    V4 and V6 are exactly the same, just different attachment of the coil.

    Will be sticking with my V4!
     
    Stu, mixchu69 and LAWTHEONE like this.
  11. Stu

    Stu Maconheiro Staff Member

    Messages:
    9,556
    Location:
    southeast of disorder
    Did you ask him what the deal was with V5? :hmm:

    :peace:
     
    lazylathe likes this.
  12. lazylathe

    lazylathe Almost there...

    Messages:
    4,129
    Location:
    SouthWest Ontario, Canada
    The V5 is a dual stem version of the V4.
    Not quite sure of the math used but if I have on OG V3 with 1 stem, then the double stem version would have to be V3.5 as the V4 is a single stem.
     
    justcametomind and Stu like this.
  13. LAWTHEONE

    LAWTHEONE Well-Known Member

    Messages:
    96
    I just found a sick way to super microdose. You can turn your heat way down too. The lotus water piece adapter!!!
    I got it from Sneaky Pete
     
    lazylathe likes this.
  14. CABtheFISHKING

    CABtheFISHKING CAB

    Messages:
    46
    Location:
    At sea
    My ideas are spreading. Glade you're enjoying it as much as I am
     
  15. lazylathe

    lazylathe Almost there...

    Messages:
    4,129
    Location:
    SouthWest Ontario, Canada
    I have been using a new technique the last few days and I am getting way more medicated off the same amount of material! It's crazy. Actually feel more stoned than usual.

    Usually I drop a load onto the screen and take it all in one hit, hold for a bit and exhale.
    It's worked for years and always got the job done.

    My new technique is to take the same load and hit it 3 to 4 times, taking smaller hits and then a big lungful of air. I just whitewall and then remove and pull in enough air to fully expand my lungs and chest.
    Maximum surface exposure for absorption.

    There is an article I read that I will link to when I locate it!
     
  16. PPN

    PPN Fleurs&Vapeur

    Messages:
    3,774
    This is looks similar to my technique, I was never a one hit guy and the inhalation of fresh air at the end of the hit makes things smooth!
     
    lazylathe likes this.
  17. Pyah

    Pyah Well-Known Member

    Messages:
    5
    Whats your favorite temp to use with the lotus wpa? It says dont go past 550, but I have been wanting to push it to 600 for a 1 hit dosage in convection mode.
     
    LAWTHEONE likes this.
  18. CABtheFISHKING

    CABtheFISHKING CAB

    Messages:
    46
    Location:
    At sea

    I hang around 520f or so. I haven't tried anything higher

    Side note, I took the thermometer of from my v3 and fixed it onto the handle I built. Getting waaaaay better readouts. I heat the block to 530f now (about 750 on my PID controller) with no signs of ware on the holder plates. Love this thing to death
     
    Last edited by a moderator: May 6, 2019
  19. Pyah

    Pyah Well-Known Member

    Messages:
    5
    I guess I didnt think he was referring to the temp of the block and not the PID temp. 750 seems to be pushing it pretty high though. I think I need to rig a thermometer up to the block to compare the temps.
     
  20. CABtheFISHKING

    CABtheFISHKING CAB

    Messages:
    46
    Location:
    At sea
    So far no real ware. I am considering 3D printing a custom silicone mold for more high temp durable connection piece.
     
    LAWTHEONE likes this.
  21. CABtheFISHKING

    CABtheFISHKING CAB

    Messages:
    46
    Location:
    At sea
    So I was going to make a custom gasket for the Sv6 out of food grade RVT600 with a 3D printed mold... but my laptop decided to NOPE on me and throw a tantrum before I could 3D print the mold. It's in the shop as of now and hopefully I'll have it made soon. I'll keep you al posted
     
    LAWTHEONE and lazylathe like this.
  22. Pyah

    Pyah Well-Known Member

    Messages:
    5
    I finally made a handle out of some dowel rods, hot glue, and some paracord. It feels a lot sturdier now. Ive been running it on 525 on the PID for the stock bowl, and 635 for the lotus WPA.
     
    lazylathe likes this.
  23. lazylathe

    lazylathe Almost there...

    Messages:
    4,129
    Location:
    SouthWest Ontario, Canada
    My controller went balls up and my Daily Driver is out of commission...
    The backups are getting a serious workout in the meantime!

    It's great to see some new people around here using the S4!
    Once you tame it, it will be the vape you always reach for.
     
    LAWTHEONE likes this.
  24. Mister G

    Mister G Deceptively Old Fart

    Messages:
    1,536
    Location:
    Title Town
    S4 still my daily driver.

    Got a med card recently and using more oil pens and concentrates, but forcing air through the world's most advanced and powerful convection heating element to mummify flower can't be beat.

    I rip and stuff, no grinding needed and still better extraction than you'll find from other "heavy hitters".
     
    lazylathe and LAWTHEONE like this.
  25. CABtheFISHKING

    CABtheFISHKING CAB

    Messages:
    46
    Location:
    At sea
    My laptop hard drive is shot and my laptop needs a complete rework. In the meantime I've added a little steel plate in between the Sv6 block and the flat coil creating a buffer allowing for better heating at higher temps without leaving a tiny melted coil imprint. Currently cruising at 460 f on the block with the box set to 735. I love the Supreme V6 so much, I wish it was more popular
     

Support FC, visit our trusted friends and sponsors