1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

small Bubbler for the Vapcap

Discussion in 'Glass' started by Mr.Sifter, May 6, 2018.

  1. Mr.Sifter

    Mr.Sifter Well-Known Member

    Messages:
    999
    Hello folks,

    what kind of small bubbler do you recommend for the vapcap ?

    I know and own a D020 bubbler. It's great and has a good size but it's not so good for traveling.
    sneaky pete has some nice smallish glass items but they are very very pricey to get to the EU.

    I've been lurking on DHgate for days now but did not find a small bubbler for the vapcap.
    What do you use for water-vapcaping on the go ?
     
    CuckFumbustion likes this.
  2. gimmiemore

    gimmiemore Active Member

    Messages:
    43
    I got this little dude
    https://www.dhgate.com/product/toro...recinfo=8,103,6#cppd-6-5|null:103:r1244044657
    and I think it's a great small bubbler, with minimal diffusion so you can really taste the herb.
    If you are looking for something smaller maybe this :
    https://www.dhgate.com/product/4-3-...recinfo=8,103,5#cppd-5-5|null:103:r0530699235
    it's ugly but it's tiny.
    Also found this while looking:
    https://www.dhgate.com/product/smok...recinfo=8,103,6#cppd-6-5|null:103:r1789851288

    DHgate can be hard to navigate but if you keep on digging I'm sure you will find what you are looking for.
     
    CuckFumbustion and Jill NYC like this.
  3. invertedisdead

    invertedisdead FC-OG

    Messages:
    3,717
    Location:
    Colliefornia
    Look for something with a recessed joint (dewar) for the lowest profile.
    10mm female for standard vapcap mouthpieces, 14mm female for Vong bodies. You can also use a 14mm to 10mm reducer to fit those mouthpieces.
     
    CuckFumbustion likes this.
  4. Sketch420

    Sketch420 Well-Known Member

    Messages:
    149
    Location:
    USA
    I just have a small 8-9" fab egg bubbler with a small ufo perc. Works better than most my other pieces but could use a bit of volume. All in all I'm happy and it was like 25USD. There are many options out there for this, try some of the non standard perc's, you'll be more than happy with the diffusion rate. My rigs that just have a single hole or a few old style holes just tend to be rougher than when the vapor is more diffused. Idk just my :2c:
     
    CuckFumbustion likes this.
  5. wall

    wall Well-Known Member

    Messages:
    207
    I love my little globe from @SneakyPeteVaporizers to me its great for small vapes but to each their own
     
  6. Ramahs

    Ramahs Fucking Combustion (mostly) Since February 2017

    Messages:
    924
    Location:
    The Internet
    Been using mine with this, with no complaints: https://www.dhgate.com/product/mobius-glass-19cm-tall-mobius-matrix-sidecar/390413782.html

    Wait...you said you already have a D020. Nevermind. Too similar

    For traveling, you may want something like an ash-catcher with a j-hook.
    Or maybe a Martian:
    Click to play YouTube Video
     
    Last edited: May 14, 2018
    CuckFumbustion and Mr.Sifter like this.
  7. Alex3oe

    Alex3oe Well-Known Member

    Messages:
    181
  8. Mr.Sifter

    Mr.Sifter Well-Known Member

    Messages:
    999
    @Alex3oe can this small bubbler be used with a Vong with MP on ?

    someone on DHgate wrote he needed to use a silicone piece for a vong to fit it properly.
     
    CuckFumbustion and steama like this.
  9. Alex3oe

    Alex3oe Well-Known Member

    Messages:
    181
    no, it doesn't fit with MP on :(

    I'm using it without the MP
     
    Last edited: May 14, 2018
    Mr.Kite and CuckFumbustion like this.
  10. mccringleberry

    mccringleberry Well-Known Member

    Messages:
    746
    [​IMG]


    I got this on ebay, it says its for a Pax
     
    CuckFumbustion and stark1 like this.
  11. stark1

    stark1 Bridges, not walls

    Messages:
    3,307
    Location:
    Jamaican me Hungary
    This works, be nice if it was female, for the aesthetics


    [​IMG]
     
  12. Abysmal Vapor

    Abysmal Vapor Shaman of The Pyramid of Orlin'Malah

    Messages:
    3,402
    Location:
    7th heaven - 666th pit (EU)
    I also have fitted mine onto a 14mm male bubbler, it has clear joint and isnt that displeasing .
     
    CuckFumbustion and stark1 like this.
  13. GreenHopper

    GreenHopper 20 going on 60

    Messages:
    1,773
    I like that!

    I take it you don't have to use a condenser tube if you didn't want to but assume it keeps the bubblers downstem cleaner?
     
    CuckFumbustion and stark1 like this.
  14. stark1

    stark1 Bridges, not walls

    Messages:
    3,307
    Location:
    Jamaican me Hungary
    Hi, yes, and also it snugs up the tip, so you don’t tip the canoe. & “loose” $60. Tip, eh?

    Someone already posted this one. seems they are omnipresent.



    [​IMG]


    This


    [​IMG]


    Form fitting function


    [​IMG]
     
    Last edited: May 21, 2018
  15. CuckFumbustion

    CuckFumbustion Lo and Behold! The transformative power of Vapor.

    Messages:
    1,893
    Location:
    Cuckfumbustion Central
    I'm finding different small bubblers out there with 10mm sockets sizes that kinds fit the MP. This one functions as a two chamber. Even has a glass bird flying high and an color changing LED light.

    [​IMG]
     
    Sketch420, GreenHopper and stark1 like this.
  16. Jill NYC

    Jill NYC Portable Collector

    Messages:
    442
    Location:
    ¯\_(ツ)_/¯
    7oli5, Megaton, Skunkport and 3 others like this.
  17. cascades

    cascades Member

    Messages:
    68
    412lou likes this.
  18. cpk

    cpk Brother of the Leaf

    Messages:
    158
    Location:
    SoCal
    I am going to go with the MFLB Orbiter this coming black friday. It comes with a lot of extras and is a quality piece. We all have our large glass but it is nice to have a quality small piece.
     
    GreenHopper and cascades like this.
  19. Mr.Kite

    Mr.Kite Member

    Messages:
    75
    be aware that the ORBITER cant take vapcaps with a mouthpiece.
    the downstem is to narrow.

    you'll have to get an adapter to prolong the 14mm joint.

    the orbiter is beautiful though
     
  20. Hippie

    Hippie Well-Known Member

    Messages:
    190
    Helios, DDave and Squiby like this.
  21. Papi

    Papi Hanlon's razor/Occam's razor

    Messages:
    43
    Last edited: Aug 16, 2018
  22. 412lou

    412lou New Member

    Messages:
    5
    Have a similar piece. Like it because it uses a DYNAVAPin the position it was designed to be used in.

    Have a small bubbler that requires the vape to be inserted up side down. Found the screens clogging more often. Same when a V5 NANO.
     

Support FC, visit our trusted friends and sponsors