Omicron Vaporizer for oils

Discussion in 'Portable Vaporizers' started by THC SCIENTIFIC, Sep 16, 2011.

  1. Vitolo Vaporist

    Message Count:
    4,203
    Location:
    The Vapor Trail
    YES!
    This is normal, and it is the same same using an eclipse oil vape with a torch.
    any oil usage that relies on oil becoming denser as it is slowly gets vaped away, and thickens...
    will reveal a gradually shifting flavor as terpinoids etc are vaped away.
    silvercloud358, rcflo, NoName and 2 others like this.
  2. eln00b New Member

    Message Count:
    26
    Cool. Thanks for the info.
  3. Jeppy JedHI Vaporist

    Message Count:
    1,092
    Location:
    NorCal Vapor Garage
    I want to thank THC for his personal help in a matter over the holidays. Don't want to be specific, though didn't want a good turn to go un-noticed. Thanks again, Brother!
  4. THC SCIENTIFIC The Guy Who Created It All.

    Message Count:
    3,709
    Location:
    Los Angeles

    You are welcome glad i can help.
  5. Omcron v1 New Member

    Message Count:
    19
    I just got a brand new black omicron v2.5 and I have a question. Is this the same as the HVD or what?
  6. OF Well-Known Member

    Message Count:
    7,863
    Location:
    Left Coast
    Congratulations, good unit. It is not, however, the same as HVD. It's an improved 2.0, suitable for 3.7 (under 4.2 max) Volt use, not High Voltage.

    Confusing enough?

    OF
    GR likes this.
  7. GR Well-Known Member

    Message Count:
    243
    As OF mentions the 2.5 top will not do 7.4v like the HVD can. I have 3 v2.5 tops and while they are an improvement to the 2.0 I personally ( only tests I have done are with my lungs and a digital timer) do not think they provide the same hits in the same time as the HVD top or the V1 can, the difference is the biggest when i use 14500 AW IMR batteries. I use my HVD solely for 7.4v now and use my V1 for 3.7v use
    silvercloud358, Bob Loblaw and OF like this.
  8. OF Well-Known Member

    Message Count:
    7,863
    Location:
    Left Coast
    Excellent catch, GR. Very important point. If you want V2.X to perform like V1 did, dump the IMR 14650 that came with it and go to AW 14500s instead. Big jump in power. Hit count per charge goes down some, but the hits are stronger and more uniform, most who've tried it swear by it and don't go back to the 14650.

    To do this you'll need the longer tail cap from the HVD version of V2 and the original tube, a 15mm spacer (not sure if anyone has found an online source, but a 15mm screw wrapped with tape under the minus end of the battery also works) or the upcoming shorter tube (best overall in that it makes the whole rig shorter.

    OF
    Bodhi Diesel, GR and NoName like this.
  9. Nosferatu Well-Known Member

    Message Count:
    1,041
    Location:
    California
    Question THCSCIENTIFIC. Sorry to ask here but I am not getting help anywhere else. SO I sent my Omicron V.2 that I bought locally in Santa Barbara into Delta9Vapes, assuming it is your main customer service site. They are claiming to have never recieved it but I know I sent it to the right address. They are now not replying and I feel like I might have sent my vaporizer away forever.

    So is delta9 the main site to deal with for all customer service or did I just screw myself? How can I go about resolving this THC?
  10. tharealmclovin Well-Known Member

    Message Count:
    746
    You should always have signature on delivery for just that reason.
    OF and Bob Loblaw like this.
  11. OF Well-Known Member

    Message Count:
    7,863
    Location:
    Left Coast
    Sadly, that's probably good advice. I'm sure you see the issues with less than honest folks?

    Looked at the other way, D9 insists on getting a signature from you when they ship to you (almost always gives my PO another chance to loose the package....). There's a clue in there, perhaps?

    My usual advice includes never sending anything in for service without a "RMA" or similar tracking in place with the company first. No guarantee but it removes addresses, ownership, timeline questions and other issues.

    Good luck.

    OF
    GR likes this.
  12. Buildozer Well-Known Member

    Message Count:
    451
    Location:
    S. California
    i was wondering how big of a difference there is between the 1.5 and 2.4 carts... i have 2.4 carts now but feel the hits are lighter than i'd like, if i micro hit it i can get a nice hit. will the 1.5 really get me that much fuller hits any faster w/o having to work too hard? i still have 2.4 carts and am hesitant to buy 1.5's if they're not a big difference.
  13. Bob Loblaw Astralnaut

    Message Count:
    1,820
    Location:
    NW
    that's something you'll have to figure out yourself, but that's what they were made for?
    OF likes this.
  14. Vitolo Vaporist

    Message Count:
    4,203
    Location:
    The Vapor Trail
    Had some questions, about ABV color and texture using the Herc.
    check it out... with technique the Herc has become a regular tool for me~

    What I am doing here, is I am keeping the button depressed.... even during the shake...
    and I am sipping and puffing.... with minor vapor.
    All at once I get richer flavor, and still shake, and sip... and when flavor is at it's peak, I will release button for only a second... and repress it to continue.
    I do not feel that release of the button momentarily is vital. I simply think I am doing it to avoid scorching the herb.
    After a number of great hits, I open the top.
    If the ABV that remains up in the mouthpiece is golden brown, then I know all the frest in the chamber will be.~
    SD_haze, GR, Bob Loblaw and 1 other person like this.
  15. OF Well-Known Member

    Message Count:
    7,863
    Location:
    Left Coast
    IMO there's a very big difference. They overlap some but when 1.5s get slow you can wreck things by pushing on.

    When a guy honestly feels he's got it sorted out, that he can control the 2.4s at will and is actually being held back with poor performance (like you?) it's probably time to experiment. But I'd advise loading light and planning on having a few accidents along the way. When they get away from you, the results are usually poor. Leaking and marginal carts are a real bummer IMO, very frustrating in that you keep messing with them rather than getting the job done.

    Good luck, and keep the 2.4s handy.

    Another great video, Vitolo, thanks again.

    I don't know about the others but I like the robe. I think it's a 'good look' for you. Never thought of you as a trend setter.....

    Not to question the Sage of the High Desert or anything, but how about some showy embroidery.....like the dragon on a Chinese silk robe? A giant leaf of our favorite plant might make a good statement doncha think?

    OF
    Vitolo, GR, Bob Loblaw and 1 other person like this.
  16. Omcron v1 New Member

    Message Count:
    19
    will i be able to buy a hercules and use it with my v2.5?? and yeah i had to ship my omicron v1 in the charger broke so i got a ophos hopefully it hits just as hard as the v1 did
  17. Buildozer Well-Known Member

    Message Count:
    451
    Location:
    S. California
    thanks for the info... the 2.4s work fine and i can get good rips all the time, its just at times i'd like more from them, faster than they can offer. i didn't expect the 1.5s would be touchy like that so thanks for bringing that up, i'll keep that in mind when i try it out.. i assumed they were not too powerful to mess anything up, so i was curious as to how strong they really were... i mostly wanted to make sure they were a good ammount stronger than the 2.4s before i went out and got some. thanks
    OF and Bob Loblaw like this.
  18. Bob Loblaw Astralnaut

    Message Count:
    1,820
    Location:
    NW
    it does hit as hard, but i don't believe the switch is rated for the 3.7 herc. i think you need an omicron, iirc. maybe OF or G can clarify
    GR likes this.
  19. GR Well-Known Member

    Message Count:
    243
    Here is how I use my different ohm carts.

    2.40hm for watching a movie and sipping on it non stop. Will not make me cough. I can refill for a long time before issues. Never made one leak and I can hit it almost non stop

    1.5ohm for stealth use , quicker to get a hit (more vapor in a shorter amount of time). Next to bed for sleeping issues. Can make me cough if I inhale long enough. . i can refill 4-6 times ( carts not dead just flow is restricted or oils have been cooked to much and taste shitty).

    5ohm cart at 7.4v for running through glass for big milky hit or carry around for big hits. Can make me cough easily. Can easily over heat it and cook the oil which also lead to clogs and leaks. These go through oil quick, for me through glass I get 20 hits or so for .2g, this means if first fill is .5g then I get low quick and can easily be fighting a cart that is low on oil and cooking the wicks. The way I deal with it is by using the first fill until I have used .2g and then fill .3, now I have a cushion past 20 hits. Because of the harder pulls I do with glass these carts ends up getting first hit clogs very easy, also since I am looking for big performance with them when they drop off they are toast, maybe 4 .2-.3g loads after the first fill.

    4ohm to run on 7.4v ( not exactly recommended) I have not tested these yet. Seems it would be easy to burn cart out if not careful on the button but I will soldier on and give it a shot soon.
    OF, Buildozer and Bob Loblaw like this.
  20. Buildozer Well-Known Member

    Message Count:
    451
    Location:
    S. California
    thanks GR, i was unaware there was more than 3 cart strengths.. i still have reading to do... thanks for the help. never heard of a 5 or 4 cart good to know. i think ill be happy w/ a 1.5... i like the 2.4 but i wish i could take it further half the time. thanks again for the response(s)
    Bob Loblaw likes this.
  21. GR Well-Known Member

    Message Count:
    243
    Well you need the HVD kit for the Omni v2-2.5 to be able to do 5ohm, or 4ohm (maybe) and run it at 7.4v. There is also a 3ohm cart, the 3,4, and 5 are really for the Persai but the HVD gives us the power to use them with the little 14250 batts.
  22. THC SCIENTIFIC The Guy Who Created It All.

    Message Count:
    3,709
    Location:
    Los Angeles

    Thank you Vito for showing proof that the Hercules 3.7v works with herbs.
    Vitolo, Bob Loblaw and tharealmclovin like this.
  23. soluck New Member

    Message Count:
    1
    hey guys new to the site. im having a problem with my omicron's charger. the light wont come on at all. im testing it right now to see if it still charges but i doubt it. anyone have any experience with this?
  24. THC SCIENTIFIC The Guy Who Created It All.

    Message Count:
    3,709
    Location:
    Los Angeles
    Please contact Delta9Vapes.com boss we will diagnose it with you.
    Vitolo likes this.
  25. Doug Just passing time

    Message Count:
    86
    Location:
    Midwest
    Waiting on my OPHOS delivery right now. I can't wait to load it up. Is this the right place?
    Vitolo, silvercloud358 and Bob Loblaw like this.

Support FC, visit our trusted friends and sponsors