NewVape FlowerPot Twax Vaporizer

Discussion in 'Plug-in Vaporizers' started by natural farmer, Nov 17, 2016.

  1. xlxaxelxx

    xlxaxelxx New Member

    Messages:
    5
    Hey guys. stumbled upon the forum today after learning about the Flowerpot and thanks to you all I'm completely sold on it. Do you think they will have a discount for 4/20 if I wait it out or should I just go along and order it now?

    Thanks for all of the awesome info it was a great help.
     
    lazylathe and biohacker like this.
  2. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    714
    Location:
    Berlin, Germany
    I don't get access to the NV site anymore!? Am I the only one?
     
  3. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    4,628
    Location:
    Letterkenny
    Must be, because it works fine for me.
     
    Hogni likes this.
  4. lazylathe

    lazylathe Almost there...

    Messages:
    2,587
    Location:
    Ontario, Canada
    @Justpassedu

    What temps are you using for flowers and dabs at the same time?
    Can you set it lower and still get good vapor from the herb before adding the dab?

    I ask because with the Errlectric i need to set it very hot to get good clouds off herb and then it is too hot to dab off... I find it is either or instead of both.

    I would think due to the Flowerpots design it would work better for this.

    My order still says PENDING, so they may be having some issues. Also did not hear back from them yet if my order actually went through... Maybe today.
     
    Prolusio and vaporlee like this.
  5. Caelar900

    Caelar900 Well-Known Member

    Messages:
    155
    @Hogni Your not the only one. Page won't load for me either. I over seas right now so could be something to do with non US connections?
     
    Hogni likes this.
  6. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    714
    Location:
    Berlin, Germany
    Got this message:

    www.newvape.com -
    Access Denied

    Error code 16
    This request was blocked by the security rules

    2017-04-12 11:53:57 UTC
    • Your IP..............
    • |Proxy IP..........
    Incident ID: 260059170447426865-918223480590463444
     
  7. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    4,628
    Location:
    Letterkenny
    Must be, works for Canada! Give it time fellas.
     
  8. Doktor Dub

    Doktor Dub Well-Known Member

    Messages:
    180
    Location:
    Europe
    Works for me right now from Germany.
     
    Hogni likes this.
  9. Doktor Dub

    Doktor Dub Well-Known Member

    Messages:
    180
    Location:
    Europe
    I heard that buying another expensive Vape automagical fixes all Problems with the NewVape Site. Just try it

    Edit: Sorry for Back to Back Post.
     
    Hogni likes this.
  10. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    1,800
    Location:
    Longisland , NewYork
    lazylathe i been using about 650F with flowers , you can definitely go lower on the temp as the head retains heat really well. I suspect what is happening is the head and nut heat up and when you draw it is designed to take that heat and turn it into hot air that gets pushed through the top holes as you inhale and down through the vapor path. I want to try for under 600F , in the video i was at around 650F and took the flower/dab hit . It worked well but i think i should have went with a smaller dab as i did not melt everything in one hit as you can see in the video. I have always got good vapor though so far using flowers only , yesterday was the 1st dab i took with flowers and was destroyed after about 5 pulls. What temp have you been using on the Errlectric ? I think you should be very happy with this setup as it definitely does not require a high temp for flowers , vapor from flowers has been forming in 2-3 seconds from my initial pull. I actually think it may be working better and extracting faster with the quartz drop in over the titanium but i have more testing to do. Oh and to add one of my favorite things regarding this vape is the fact its all ready to use in about 5 minutes heat up time. [​IMG]
     
    Last edited: Apr 12, 2017
  11. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    714
    Location:
    Berlin, Germany
    Still no connection to NV....
     
  12. duff

    duff FuckBatteries

    Messages:
    226
    @Hogni, you're going here?

    I seem to remember they changed the URL during their outage but I could be wrong.
     
  13. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    1,800
    Location:
    Longisland , NewYork
    Try Emailing them direct at Sales@newvape.com , I am sure they will get you sorted.
     
    Hogni likes this.
  14. SoDelicious

    SoDelicious Active Member

    Messages:
    57
    Maybe try clearing your history/cookies?
     
    Justpassedu and Hogni like this.
  15. PPN

    PPN Fleurs&Vapeur

    Messages:
    2,677
    Got the same issue...
     
    Justpassedu and Hogni like this.
  16. duff

    duff FuckBatteries

    Messages:
    226
    Can either of you access the site from your cell phone or different pc when you're not at home?

    What is the full URL of that error?
     
    Justpassedu and Hogni like this.
  17. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    714
    Location:
    Berlin, Germany
    it's their actual URL

    Thanks @Justpassedu Will try it.

    EDIT: Have just sent an email to them. We'll see what happens.
     
    Last edited: Apr 12, 2017
    lazylathe, PPN and Justpassedu like this.
  18. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    1,800
    Location:
    Longisland , NewYork

    I believe the issue is that when they had a Past Credit Card mishap , most of the problems had stemmed from international orders. So when they had set up the new site and new secure payment methods they had only set it up so far to work in the U.S. and Canada . This could be the problem if you are trying to order out side of the U.S. but i would say best bet is to Email them , they usually reply back in a few hours to 1 day tops. Edwyn is the owner , you can always mention him in the email and i am sure in some way , shape or form he will try to help. He really stands by the business and products and i know wants to help and get the Flowerpot out there.
     
  19. lazylathe

    lazylathe Almost there...

    Messages:
    2,587
    Location:
    Ontario, Canada
    UPDATE!!

    I received a call from Chris at NewVape today about my order.
    They have had a few orders not process correctly due to an error in their system.
    Most orders are processing correctly, just a handful are causing issues.
    Answer any calls from a (561) area code as it will be NewVape trying to correct the issue, if you have ordered anything and not received email notification.

    We managed to sort my order out but he needed more information from me.

    @Hogni@PPN

    I also asked about international orders and this is something they are gearing up towards!!
    At present they do not have enough staff to handle the shipping etc...
    For now it is only US and Canada but that is going to change soon!!

    So far, excellent service from NewVape!


    @Justpassedu I am running the Errlectric at 800F to get nice clouds from flower but that is way too hot to dab off... Looks like the FP may be the answer!
     
    Last edited: Apr 12, 2017
  20. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    714
    Location:
    Berlin, Germany
    Thanks for this info. ATM prob is less international shipment but just getting access to their site!?
    THIS was the only issue we've talked about. I still got access a few days ago but not anymore.
    I got no reply by NV to my request from yesterday regarding this up to now.
     
    biohacker and duff like this.
  21. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    4,628
    Location:
    Letterkenny
    No FlowerPot for you!!! Come back! ONE year! :tup:

    -NV Nazi
     
    Hogni likes this.
  22. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    1,800
    Location:
    Longisland , NewYork
    lazy your gonna love it , 650F and getting vapor almost instantly , i definitely suspect you can take it even lower and that will be my mission over the weekend to test different temps. Flavor is really nice , i forgot to mention i have been exclusively been using it with my new Kannastor GR8TR with the vape plates so the grind is fine and usually with a half packing making sure the screen is fully covered i average 2-5 hits and than reload. A word of advice do not over tighten the head and nut when setting it up , they will be a pain to get unscrewed if need be and they don't need to be super tight , just hand tightened . 800F is definitely not needed , my coil would most likely be almost glowing red at that temp and com-busting with this. I have not com-busted once by the way. Prepare to clean your glass daily , that is the only downside but a upside if ya think about it.
     
  23. SoDelicious

    SoDelicious Active Member

    Messages:
    57
    Thanks for all the helpful info + awesome videos! really appreciate it.

    Im sold on the Flower Pot and will be purchasing that next :rofl:I was planning on getting the herborizer ti but I think there's too much glass for me. I am a clumsy person and don't trust myself with all that glass.. :wave:

    Also,how much material do you usually take per bowl (if you even measure/track)?

    I currently use about 0.025 - 0.035 per bowl with my sub which seems to milk it pretty well.

    Just wanted to know how the Flower pot will perform with micro doses :)
     
  24. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    1,800
    Location:
    Longisland , NewYork
    No problem at all @SoDelicious , i'll try and have more info and videos as i use it more. In all honesty i am not a micro-doser , so i have been mostly filling the bowl up about half way but i'd say as long as you at least have the screen covered which should not take much you should be fine producing huge clouds. It should not take much at all. I been doing a half packed bowl , with a super fine grind almost to the point of it being kief and averaging 2-6 big rips but if i pull to long i can cash it about 2 hits and get brain freeze lol. I agree also on the herborizer having to much glass with a expensive price point . My reason for trying this out , i'd love to hear how it compares to the Sub for the price. I honestly get such good extraction i cant see how much better the Sub can be , maybe herborizer would win a drop in taste being all glass i think but doesn't it have some titanium in the air path also ? The Flowerpot really produces a great taste , it has beat out my top contender the Evo in taste so far and probably clouds also and i own 2 Evo's i like them so much. Oh and if i had to measure off the top of my head i'd say i been putting about a teaspoons worth per packing maybe a drop less.
     
    Prolusio, duff, muunch and 4 others like this.
  25. PoopMachine

    PoopMachine Well-Known Member

    Messages:
    1,403
    Location:
    Somewhere Jus Lyke Compton
    I run mine at 580. The flower doesnt start to vaporize until you cap it. Flavor city and you can cache out the entire bowl if your lungs are up to it.
     
    Prolusio, duff, biohacker and 2 others like this.

Support FC, visit our trusted friends and sponsors