1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

NewVape FlowerPot Twax Vaporizer

Discussion in 'Plug-in Vaporizers' started by natural farmer, Nov 17, 2016.

  1. MileHighHuman

    MileHighHuman Well-Known Member

    Messages:
    293
    No offense, but .1 will not provide much effect for me (much less couch-lock)

    So, if there is anyway to make the bowl capable of vaporizing up to .5 properly then that would be just an added bonus for the others out there who don't consume as much as me.

    Thats unfortunate about the delayed glass bowl, but thats fine. Thanks for the honest information.


    Great to find out the ShowerHead is back in stock. Is there any possible accessory that could be created to keep the ShowerHead always carb capped?

    For those who use mainly or only flower I'm sure the carb cap is an annoying accessory to place on and off for each inhalation. Obviously it should be capable of removing for if double deckers are ever desired, but id really like to see something that prevents me from having to use the carb cap so often if that makes sense?
     
    pxl_jockey and Zow237 like this.
  2. biohacker

    biohacker fully melted

    Messages:
    6,891
    I was going to say "lightweight"! :rofl:But 0.5g has the pendulum swinging the other way a touch too extreme IMO, so a halfway point of about .2-.3g would be the sweet spot.

    From what I know about your preferences bro, you won't be using the cap for flowers anyway and I know you don't conduction dab, so you probably don't even really need the cap ;) :2c:
     
  3. LabPong

    LabPong Well-Known Member

    Messages:
    882
    Location:
    BuckFumbustion

    One thing to keep in mind here with using glass.....you will not have the ability to have as big of a load area because you need to make the glass much thicker than what you can do with metal. I never used the stock panhead Ti bowl enough to see what the load capacity could be.

    How big are full loads in the stock Ti bowls (20mm sizes)


    Also, I never even use the carb cover for flower....not at all needed as I think most all find.
     
    pxl_jockey likes this.
  4. YaMon

    YaMon Vaping since 2010

    Messages:
    249
    @MileHighHuman I am not sure what vapes you have used, is the FlowerPot on the list?
    I thought VapCaps were efficient and then I purchased the FlowerPot. The NewVape scoop that comes with the bundle holds 0.05g. While I have only had the FP for about three weeks I've not loaded more than this as my goal has been complete extraction and consistent ABV color. I want all the goodness I can get! Certainly I've loaded 0.05g successively in the same session and may go above 0.1g just to check it out... who knows perhaps it will be another FP revelation for me at 0.1g and above.. dunno. My educated guess will be the larger bowl will take more work to extract..
     
    pxl_jockey likes this.
  5. Alexis

    Alexis Well-Known Member

    Messages:
    2,227
    You mean, you CAN actually keep up now, right?;):lol:
     
  6. LabPong

    LabPong Well-Known Member

    Messages:
    882
    Location:
    BuckFumbustion
    Yea..I don't think he has used the flowerpot yet......when he does....he will know that 0.1g in one vape does not at all = what you can get out of another. So until we know what vapes he has used, not sure to what extent milehighhuman has experienced this principle yet.
     
    pxl_jockey likes this.
  7. biohacker

    biohacker fully melted

    Messages:
    6,891
    I know MileHighHuman, and he has a very high tolerance and medical needs, and probably vapes more than double-triple what the average person does here. He currently uses the GS but has also owned the Herbalizer, Sublimator, EVO, and a few others. I don't think .1g will satisfy him regardless of vape :2c:

    :rofl:
     
  8. LabPong

    LabPong Well-Known Member

    Messages:
    882
    Location:
    BuckFumbustion
    Then that would make sense for his T level and uses. I would say even if you have to reload to get a full session in...managing that load and refilling are so quick and easy. I actually like the ability to monitor the load close up and quick stir it between draws. That is what I really enjoy using this vape, total control fast and easy from start to finish no matter your use case scenario.

    The bonus's are you get full clean extraction to such a high level.
     
  9. biohacker

    biohacker fully melted

    Messages:
    6,891
    Agreed, i'm a fan of smaller bowls myself... I think the stubby is pretty much perfect.
     
    pxl_jockey, Alexis and YaMon like this.
  10. VaporWare

    VaporWare Well-Known Member

    Messages:
    375
    The cap does help to get denser vapor earlier, especially at lower temps, but it’s not really a requirement for flower. Since I don’t always use it, I don’t find it annoying to deal with.

    In case you do like having it capped all the time though, you can just leave the Ti Shower Cap on as long as you don’t turn it too far over. The cap goes down a little over the edge of the Showerhead, so it should stay in place when tilted at *least* up to 45 degrees and probably beyond.

    I never worry about it falling off while I’m using it, even with a dabber screwed into it. Other people have left it on long term with no dabber/handle screwed in and I don’t think anyone reported problems using it that way.

    However, after doing that for a while, I think most people who tried it went back to either completely open or just capping for part of the draw when only using flower, so I wouldn’t assume you’ll want it capped before trying it. If I could only use it one way, I think I’d choose open.
     
  11. LabPong

    LabPong Well-Known Member

    Messages:
    882
    Location:
    BuckFumbustion
    When I cap (flower only) at low temps it takes too long to get what I need in one draw. Not sure if this is so for higher temps though.
     
  12. Vapologist

    Vapologist HamsterDAMAGED

    Messages:
    367
    If you need .5 grams, per hit, maybe concentrates would help you more? .5g per hit seems crazy(imo) but I don't know your situation!

    You must have insane long capacity.
     
    steama likes this.
  13. LabPong

    LabPong Well-Known Member

    Messages:
    882
    Location:
    BuckFumbustion
    I believe he means load size not hit size.
     
    pxl_jockey, Alexis and steama like this.
  14. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    2,891
    Location:
    Longisland , NewYork
    The stubby is actually the largest bowl in the lineup , depth wise.
     
    pxl_jockey and biohacker like this.
  15. muunch

    muunch hotboxing the cockpit

    Messages:
    1,771
    I feel like the increased mass of the shovelhead (I can't speak for the panhead) makes me use temps about 10degrees higher than I would with the stubby bowl though, just my observations after a few days.
     
    pxl_jockey likes this.
  16. biohacker

    biohacker fully melted

    Messages:
    6,891
    You're right! I was using my stubby because it was 14mm so I could use an adapter, but yeah the OG bowls are smaller. How does the stubby compare in size to the current shovel/pan?
     
    pxl_jockey likes this.
  17. Pyr0

    Pyr0 Stoned Roses

    Messages:
    824
    Location:
    Wirral, U.K.
    GRRrrrr lol
    Guess there's no new parts for me this month.
    Been waiting on @VapeFiend.com restocking since before Xmas but now FedEx have lost half the shipment
    Vapefiend tell me they have the PanHead and ShovelHead bowls, but no 14 & 18mm posts - Doh! :doh:
     
    pxl_jockey and Alexis like this.
  18. LabPong

    LabPong Well-Known Member

    Messages:
    882
    Location:
    BuckFumbustion
    Get one of the cheap 14mm glass bowls some of us are using. They work pretty good.
     
    pxl_jockey likes this.
  19. Doktor Dub

    Doktor Dub Well-Known Member

    Messages:
    616
    Location:
    Europe
    i would have great interest in a smaller bowl preferable less wide which would mean it has to be tapered in some way.
    A bowl with a bit more restricted airflow would also be interesting.
    I would try the glas option but i am very ok with TI
    :2c:
     
    pxl_jockey likes this.
  20. Danksta

    Danksta Well-Known Member

    Messages:
    1,038
    These cheap glass bowls are fine for now. No need to wait for the others. Get one while you wait. It's worth it. :D

    And these glass bowls have a nice bowl size a lot of you seem to want. (smaller than the Ti)
     
    btka, pxl_jockey, lazylathe and 2 others like this.
  21. LabPong

    LabPong Well-Known Member

    Messages:
    882
    Location:
    BuckFumbustion
    Yea....I like the glass bowl variants we are using....they are smaller than the stock Ti bowls.. (newer panhaead/shovelhead). I can put in as little or up to about 0.125 very comfortably to use as needed.
     
    pxl_jockey likes this.
  22. Doktor Dub

    Doktor Dub Well-Known Member

    Messages:
    616
    Location:
    Europe
    I would write them a mail, they seem to work on their website - searching for Flowerpot got me different items during the last minutes and i don t think they got the new bowls / heads but no Posts...
     
    pxl_jockey likes this.
  23. Pyr0

    Pyr0 Stoned Roses

    Messages:
    824
    Location:
    Wirral, U.K.
    I've already spoken to them on the phone, that's how I know FedEx lost half the shipment.
    They have no wrap arounds either.

    I was told Newvape are having to make all the parts again, so it may be a while :(
     
    Alexis and pxl_jockey like this.
  24. muunch

    muunch hotboxing the cockpit

    Messages:
    1,771
    I could probably fit .3 in a stubby if I really wanted. New one seems to be like .2 or so which is consistent with my female bowl that has the screen groove.
     
  25. Danksta

    Danksta Well-Known Member

    Messages:
    1,038
    I think these lil glass bowls are getting me to use less too. A couple quick rips at 777 get me pretty medicated.

    I mainly use the Ti bowl when I just wanna do 3 hits in a row. That bowl is the easiest to empty.

    No one is at work today (GO EAGLES), I wish I could just setup the FP here at my desk :evil:. All this talk is getting me rabid.
     

Support FC, visit our trusted friends and sponsors