1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

NewVape FlowerPot Twax Vaporizer

Discussion in 'Plug-in Vaporizers' started by natural farmer, Nov 17, 2016.

  1. Doktor Dub

    Doktor Dub Well-Known Member

    Messages:
    268
    Location:
    Europe
    Just had a look at the New Vape site and there are two new Flowerpot "Holders" as an alternative to the quite expensive but also nice looking Try Base. One "Dab Station" and one just Holder.

    https://www.newvape.com/vape-essentials/flowerpot-vaporizer/

    Btw i dont think i will ever be able to make the decision between the Flower Pot and sub/Herbnail/HerborizerTI/D-Nail Lotus.... first world Problems....
     
    Prolusio, 6079Smith, Hogni and 3 others like this.
  2. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    5,348
    Since i'm in the exact same boat i'm wondering if we should start a support group/thread? :rofl:
     
    Prolusio, SoDelicious, duff and 5 others like this.
  3. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    2,064
    Location:
    Longisland , NewYork
    Been using a set of helping hands to hold it when not in use , came in handy haha usually use it when I solder. Does the job. I can't compare to the sub as I have never used 1 but I can say it hits very hard and is tasty. Only cost me about $120 to get me going with wasn't much just to try it & I see it staying so far. Would be cool if they can make a interchangeable quartz head for it or even Sic. Helping hands - https://www.amazon.com/gp/aw/d/B000...+soldering&dpPl=1&dpID=31GEhMw7WvL&ref=plSrch
     
    Alexis likes this.
  4. Doktor Dub

    Doktor Dub Well-Known Member

    Messages:
    268
    Location:
    Europe
    @biohacker great Idea! All Owners should support us with Test Stations including worldclass testing Material.

    It s a really though Decision for me, these cost all some money and i can / want not to own more than one of them. It s an item for the late evening and can t be out on the Table the whole Day in my living situation, so it has to be "the one"....
     
  5. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    1,149
    Location:
    Berlin, Germany
    Welcome to the club! :wave:

    We need more infos and comparisions!!

    How to decide without reliable basic infos?

    @biohacker Pal, dont know that you can't decide? After reading your last posts in different threads I thought you want to buy them all?? :p
     
    Alexis likes this.
  6. Alexis

    Alexis Open minded philosopher and realist.

    Messages:
    751
    Location:
    Bedford, United Kingdom
    I also hear you Doktor. I similarly feel that only one high end acquistion will be possible for me for time forseeable.

    It is so important for us to be totally satisfied with the choice, in the long run.
    Cant be dealing with regrets and feelings of discontentment. Life too short for that shit!:nod:

    But how do we make the best choice before we buy? We come here of course, but that doesnt always help and can open up a whole new can of snails!

    Like how @biohacker has now informed me of this flowerpot device, which hasnt helped really (still appreciate your "help" though) :lol:

    Although this flowerpot does confuse me a bit. The site gives very limited information. I can see no clear indication of exactly what you need in total to get started.
    I have zero experience with enails and concentrates/dabs etc.

    I just think they could make it a little clearer what you actually need to buy and for what.
    I know can just ask you guys but a fair point still.

    Im sure however that I read they also use aluminium materials, so at the moment I may have to unconsider it after my allergy problem with the Supreme, but I'll keep a keen eye on it.

    Yeah we really need a bar in every town with every top vaporizer to hire for an hour. I can see it now, right next to the public library!:clap:
     
  7. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    1,149
    Location:
    Berlin, Germany
    You need an enail with a 16 mm coil if you should'nt have them already.

    Essentials from New Vape:

    - Flower Pot Head & Nut
    - Flower Pot male or female body.

    That's all you really need.

    Nice to have from NV:

    - Enail Handle
    - Tray Base
     
    Last edited: Mar 14, 2017
    Alexis likes this.
  8. Baron23

    Baron23 Well-Known Member

    Messages:
    2,557
    My one disappointment is that it fits a 16mm barrel coil only. Wish it was 20mm so that I could use one of the three 20mm coils I already own with one of the two controllers I already own.

    I know, I know...bitch, bitch, bitch! LOL

    So, will probably just get a 16mm coil and give it a try.
     
    scalescliffs and biohacker like this.
  9. Alexis

    Alexis Open minded philosopher and realist.

    Messages:
    751
    Location:
    Bedford, United Kingdom
    Thanks, Im totally clueless with enails etc. So I would need quite a bit of stuff from them:

    Head and nut ($85), body ($35), enail coil ($35), enail handle?(45),
    And surely the controller as well? ($95).

    Plus maybe also the base with holder ($30).

    So a minimum of... $280, excluding the holder.

    Not bad I guess. The same price range as the other vapes Im considering (Herborizer Ti and VHW).

    Its still hard for me right now to make an impression of this one and begin to understand what it can offer me personally, vapor wise, efficiency wise, allergy friendliness. All the pros and cons, like heat up time, minimum load etc etc.

    It looks pretty easy to actually use once all set up. Early days yet though.
     
    biohacker likes this.
  10. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    2,064
    Location:
    Longisland , NewYork
    I used mine all day yesterday and it hits great but i am having a huge problem . Every time i go to take the head and place it on my bowl for a hit , it gets stuck. I had to break out the pliers a few times yesterday to get it un-stuck. The company says there is a .01 gap between them but i don't think it is enough. It is fine when cold and does not get stuck but when heated i am guessing it expands. This has caused me to waste a few full bowl packing's as they got roasted quick while i was trying to pry this thing apart.
     
    Hogni and biohacker like this.
  11. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    1,149
    Location:
    Berlin, Germany
    Same prob as the Sublimator..
     
  12. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    5,348
    Used the Sub frequently over the past week...never even seen anything close to sticking. However, I did notice this fair warning on their website:

    *DO NOT PLACE A COLD HEATING DEVICE INTO A HOT ATOMIZER. THE TWO OBJECTS WILL FUSE TOGETHER (not covered by warranty)

    Probably better for the Sub vs Twax thread, but just wanted to point out facts.

    By the way, doing the above would be quite impressive, I guess you would have to have multiple heaters, and have one connected with an atomizer to thermal equilibrium, and then remove the heater and very quickly throw on a cold heater.
     
  13. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    2,064
    Location:
    Longisland , NewYork
    The thing is , the actual bowl portion is always going to be cold bc if it was warm the flowers would just cook away. So the head is heated than placed on the bowl , with 01. clearance there is not much room for expansion when hot. It is really becoming a pain as the unit works very nice if this does not come into play. Called Newvape and the lady i had spoke with says she uses one also and has no problems with hers. I don't know what to do as i like it when it works , I had asked if they could make the clearance a drop bigger for me but they said it would introduce to much airflow.
     
    Last edited: Mar 15, 2017
    Prolusio, Alexis, Hogni and 1 other person like this.
  14. Jen

    Jen Well-Known Member

    Messages:
    78
    Location:
    Texas
    Wonder what's going on with their website? I've been trying to get on for two days now to order more accessories.
     
  15. PoopMachine

    PoopMachine Well-Known Member

    Messages:
    1,451
    Location:
    Somewhere Jus Lyke Compton
    Well.. funny you mention that. I had two credit cards get compromised this week and the only place I had EVER used one of them was to buy something from NewVape last week. I had just gotten the card two weeks ago so the only transaction ever made on that card by me was to NewVape and then last night it was fraudulently used 10 states away.

    Nothing but love for NewVape. I know it wasnt their fault. Just giving a heads up.
     
    biohacker likes this.
  16. Baron23

    Baron23 Well-Known Member

    Messages:
    2,557
    Yeah, I had heard a few days ago that they had to take their site down for refurbishment but didn't know they were having issues with CC fraud. This usually goes to their CC processing service company as the design of most secure retail sites don't allow CC info to be stored on site, it goes direct to the CC processing service company. I really dunno much about it so will shut up now.
     
  17. PoopMachine

    PoopMachine Well-Known Member

    Messages:
    1,451
    Location:
    Somewhere Jus Lyke Compton
    So Im running the Flower Pot at 620 degrees on the Hexnail and its awesome. Concentrate flavor is very good and the flower flavor is off the charts. The flower wont vaporize unless you cap the nail so you can start with a dab and then when you cap the flower vaporizes all in one shot. If you put too much flower in there you will need huge lungs.

    Ive yet to even have a bowl turn dark brown. Medium brown and very even.

    Its a beast!
     
    ichibaneye, anasrzi, Prolusio and 3 others like this.
  18. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    5,348
    @lazylathe sounds like this one may defeat me as well! lol

    @PoopMachine no sticking bowls like @Justpassedu ???
     
    lazylathe likes this.
  19. PoopMachine

    PoopMachine Well-Known Member

    Messages:
    1,451
    Location:
    Somewhere Jus Lyke Compton
    Ive only had issues with the nail head sticking on the post where you put it when not in use. I dont leave it on the nail base all the time.
     
    Hogni likes this.
  20. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    2,064
    Location:
    Longisland , NewYork
    Hits are huge , this is true but unfortunately I am going to have send mine back . Newvape still has not answered my emails or calls in 5 days. Now everything has fused together , I cannot get the bowl off the top part and my enail coil is also stuck , I tried ISO soak , heating it up , pliers and nothing . So it all has to go back . Kinda bummed as I had my buddy over to show him and let him try it out yesterday and this all went down before he could even take a rip. So we used the herbalizer instead .
     
    Prolusio, duff, lazylathe and 2 others like this.
  21. duff

    duff Well worn

    Messages:
    734
    @PoopMachine you have our sympathy.
    That is one shitty customer experience.

    I hope they respond.
     
    ichibaneye and biohacker like this.
  22. Baron23

    Baron23 Well-Known Member

    Messages:
    2,557
    Their website is still down. They apparently had issues with CC security. Now, as far as I know, pretty much all on-line vendors use a CC processing company and do not keep CC data directly on their site, so I suspect that's where the issue is and that this is what is consuming a bit of their time right now (but I have no first hand knowledge so take it with a grain of salt).

    New Vape is actually just a vape brand within what is basically a metal machining company that also produces other high precision machined parts. I don't think they are flaky at all although it would appear that they are not being very responsive at all.

    My one CS experience with them was that they responded to me very quickly.
     
  23. duff

    duff Well worn

    Messages:
    734
    I do websites for a living and it is pretty easy to disable the payment processor from any website.

    The fact that their site is down and gives a certificate warning led me to check the certificate.

    Their certificate isn't valid because it doesn't contain newvape.com only variations of newvape2.com.

    FWIW
     
    ichibaneye and biohacker like this.
  24. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    2,064
    Location:
    Longisland , NewYork
    Just a heads up and update on my issue i have been having with my flower pot. The owner Edwin had called me today apologizing. I personally may have just got a unit that was a few mm's off. He has been very kind in wanting to fix my problem. I had said on this forum the actual product works great if i was not having the issue with everything sticking. This so far is some of the best costumer service i have experienced having the actual owner call me and want to do right by his product so i cannot fault the company at all. Also if anyone was experiencing issues with there credit cards that will be a thing of the past as the company is changing everything up , will have a updated site and a very secure way to make payments from what i was told. They also have a few new products in the works for the flowerpot that sound amazing. I will definitely keep you all updated on the outcome of how i am taken care of with a new product. Thank you @NewVape710 .
     
    Prolusio, Hogni, Alexis and 3 others like this.
  25. duff

    duff Well worn

    Messages:
    734
    Hogni, Justpassedu and biohacker like this.

Support FC, visit our trusted friends and sponsors