1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

MistVape Touch

Discussion in 'Portable Vaporizers' started by mistvaporizer, Aug 18, 2016.

  1. flotntoke

    flotntoke thoroughly vaped

    Messages:
    2,514
    Keep practicing! A few subtle differences from Mi to MVT, but kind of wonder if it takes a bit more practice for those of us more used to Mi than it would from someone starting fresh.

    Great mix @soulfulrebel.MC ! Same 3 are some of my favorites too (along with VCs & Zion).

    Still prefer the MVT to the Mi myself. Mi works well, but MVT refinement really does it for me! Recently flew out of town and wanted to take more than VCs. The Mi went on the trip, mostly because I wouldn't be as distraught if something happened to it or TSA grabbed it. As it turned out, I dropped the Mi and broke the female glass GonG (fortunately not until last night away). Will have to send it in for repair, but keep forgetting because I'm back with MVT at home. Will get to it eventually, but have no doubts if it were my MVT it would already be to Dave & back!

    I like the 14mm form factor of MVT better. I like the instant heater response better. Seems easier to get lighter or heavier vapor at will depending on what I'm looking for in that session. I also like the way it feels in my hand and the way it looks better. Doesn't seem to go through batteries as quickly, either.
     
  2. duff

    duff Well worn

    Messages:
    878
    I am really digging the 14mm stem too.
     
    muunch, mistvaporizer and flotntoke like this.
  3. flotntoke

    flotntoke thoroughly vaped

    Messages:
    2,514
    Not to derail this thread, but all in favor of MVT so hope OK.....

    Not only do I prefer the 14mm form factor for better hits, less consumption, easier to work with, and more flavor (smaller load = better flavor and less flavor drop-off before reload IMO)... I greatly prefer it to using Mi 18mm with the 14mm bushing insert, and not just because it is one less thing to keep track of on the go. MVT native 14mm just seems to work better and taste better. Though, must admit this could be because of the more refined heater as much as 14mm part.

    Either way, the more I use it, the more I prefer it to any other remotely "pocketable" vape.

    To anyone cruising through thinking about a new portable purchase, this is the one you want for full convection on the go vaping!
     
  4. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,834
    Location:
    Judge the Vaper by the Vapor
    Nice setup! :tup:

    I also have a male cooler in 14mm and 18mm that can be used directly on these types of vapes...
     
  5. StormyPinkness

    StormyPinkness Rhymenocerous ʕ•ᴥ•ʔ

    Messages:
    1,676
    Location:
    California
    ...not sure how I missed that on you had 14mm versions on your store, kept thinking it's only 18mm. I'd love to grab a 14mm male one for my mvt.
     
  6. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,834
    Location:
    Judge the Vaper by the Vapor
    PM sent
     
    mistvaporizer and flotntoke like this.
  7. GetLeft

    GetLeft Well-Known Member

    Messages:
    925
    Location:
    Convection City
    I've discovered unscientifically, as others here have done scientifically, that I'm getting a pleasing number of hits per charge (LG H2) with my mvt. It doesn't take many hits for the battery to start to slow down in its heat-up time, but even though it takes several seconds more for the mvt to reach temp (I counted to 13 or 14 last use before I got the glow I wanted, as opposed to 10 tops on a freshly charged bat), it has continued to reach heat for a good number of 'sessions' (if you call a good hit or two a session). Nice not to have to charge too frequently.
     
  8. mucsusn

    mucsusn 60 going on 20

    Messages:
    364
    Location:
    DC Metro
    Brought my MVT (and a vapcap) on a little two day road trip to help my youngest move for grad school. I use a Pelican 1050 with my MVT and Mi's, can carry 4 batts, a stem and vape with that nice and airtight. I throw a single USB charger in with the travel charging kit. Nice little travel companion:clap:
     
  9. KeroZen

    KeroZen Chronic vapaholic

    Messages:
    2,386
    Location:
    On Air
    @GetLeft: I would really advise you (and everyone) to not make your coil glow.
     
    mistvaporizer, GetLeft and flotntoke like this.
  10. almost there

    almost there Well-Known Member

    Messages:
    627
    This adapter looks exactly like the one they sell at TAG, I believe I paid $6.99 for it and it fits perfect in the Milaana
     
  11. flotntoke

    flotntoke thoroughly vaped

    Messages:
    2,514
    1050 size, eh? Going to have to check this out. Sounds like a nice stink-proof kit. Thanks!

    +1, hell +50 on this one. I try not to do it even to check batt when out and about. Think we may find that this is the weakest link in MVT, and beating it up seems like it will bring problems sooner.
     
  12. soulfulrebel.MC

    soulfulrebel.MC Well-Known Member

    Messages:
    41
    Location:
    London, England
    Absolutely spot on with all the above @flotntoke ! I recently got my Mi out as it had been about a month since I used it. I can get massive clouds on demand and felt like chasing for the day. ( The Touch will still get you clouds if you want ) After a couple of sessions was shocked just how much it had drained the Mi battery as compared to the Touch. But it's a bigger more powerful heater so I'd expect it to draw on the batts more.

    I guess It was just a surprise coming from the Touch where I find it hard to keep track of battery life , just cos they seem to be in there for a lot longer before it affects the performance and vapor production.

    With the mi I need to press the button on an off (modulate) after initial heat to get the best results. Don't need to with the MVT . I also found the Touch less harsh and now hit it predominately dry and not through my gong. which is where it's refined nature shows. It really is a great little vape and looks wise, one of the Purd-iest !


    @flotntoke I'd love to try the Zion as it would be nice to have a tighter grip on that power. :tup:

    @cgod What's your grain pattern like ? It'sb been a while since I've seen any wood porn :lol:

    Any new Touch owners please share pics when you can please, it's always nice to see them. :tup:


    @duff any pics of your MVT ?
     
    Last edited: Aug 12, 2017
  13. GetLeft

    GetLeft Well-Known Member

    Messages:
    925
    Location:
    Convection City
    Yeah I hear you but raise your hand if you haven't gotten a glow? This morning I was replacing my bat and stupidly put it back in positive side down. I have the switch too but it wasn't in off position of course. Luckily I caught the glow as I was setting it away. It was a bright glow.
     
    Last edited: Aug 12, 2017
  14. sickmanfraud

    sickmanfraud Well-Known Member

    Messages:
    1,074
    I am under the impression that with or without the "kill" switch on the bottom if the battery in the MVT is upside down it will glow until you catch the problem or the battery empties.

    @mistvaporizer Just saw a picture of one of the custom MVT's on puffitup's IG page.
    GORGEOUS.
     
  15. mistvaporizer

    mistvaporizer Well-Known Member Manufacturer

    Messages:
    450
    Location:
    Delaware, USA
    Got a batch of Touch units I'm finishing up now. Four custom frames, I'll try to post pics tonight or tomorrow.
     
  16. little maggie

    little maggie Well-Known Member

    Messages:
    2,735
    How do I avoid it? When I hold the button long enough it starts to glow. Am I supposed to hold it for short bursts?
     
  17. Vitolo

    Vitolo Vaporist

    Messages:
    8,686
    Location:
    The Vapor Trail
    Once it starts to glow, I toggle the button, to keep it at a dull glow... and when flavor/vapor becomes very warm, I back off a bit.
    I can sum it up by saying, I start with a glow, then keep it at a bare minimum of a glow for the extent of the hit.
     
  18. mistvaporizer

    mistvaporizer Well-Known Member Manufacturer

    Messages:
    450
    Location:
    Delaware, USA
    There will be times when the coil glows but the problem comes in when you see it glow and you keep heating. Usually as it starts to glow I come off the button and feather the button based on the feel of the vapor. This technique doesn't work that well with water since the vapor is so cooled.
    If you bring the coil to a glow and then keep heating so it gets very hot, you can damage the coil, at least shorten its life.
    Vito nailed it, keep to a dull glow
     
  19. GetLeft

    GetLeft Well-Known Member

    Messages:
    925
    Location:
    Convection City
    KZ may be reminding us that metals can do funny things at high temps. Always wisest not to vape funny things.
     
    StormyPinkness and mistvaporizer like this.
  20. paytonpenn

    paytonpenn Level 30 Nature/Healer

    Messages:
    2,659
    Click to play YouTube Video
     
  21. mistvaporizer

    mistvaporizer Well-Known Member Manufacturer

    Messages:
    450
    Location:
    Delaware, USA
    Here is one making it's way across the pond, leaving today
    [​IMG]
     
  22. StormyPinkness

    StormyPinkness Rhymenocerous ʕ•ᴥ•ʔ

    Messages:
    1,676
    Location:
    California
    Got a @DDave male 14mm cooler for this and it is perfect. Can't recommend it enough if the vapor temp is bugging you at all, I'm really surprised at how well these little things work. Much better than my last setup of two stems connected by silicone whip leading into 18mm female cooler, also much shorter. I have to say it looks a little goofy on my other vapes, but I actually kind of like the look on my mvt. Almost somehow looks like a radio or something to me. Best friends forever.

    [​IMG]
     
  23. drterps

    drterps Member

    Messages:
    20
    im interested too
     
    GetLeft, DDave and StormyPinkness like this.
  24. sickmanfraud

    sickmanfraud Well-Known Member

    Messages:
    1,074
    CONGRATULATIONS TO @mistvaporizer . I just saw the the MVT is stocked by our good friends at @PuffItUp .

    A few weeks ago the MVT came up in a conversation I had with Randy and he said he really enjoyed his MVT.
     
  25. Shit Snacks

    Shit Snacks Milaana. Lana. LANA. LAANAAAAAA

    Messages:
    4,213
    Location:
    Motion Pictures
    That is HUGE @mistvaporizer congratulations! All caught up and ahead now :tup:
     

Support FC, visit our trusted friends and sponsors