Discontinued Lily vaporizer by Triihouse

UnshavenFish

Well-Known Member
Drum roll..........vapefiend now stock Lilly and daisy:clap:

Just ordered Lilly and WPA (WPA they added to the site while i was on the phone :rockon: So i could order it straight away)

And even bigger news is i also ordered that micro bubbler that people are talking about:science: (think they have around 500 so plenty to go around)

Should have it tomorrow will get a quick review up as soon as i can:tup:
 

UnshavenFish

Well-Known Member
Sorry for double post but first one was moved here from air thread and i cant edit.

Just wanted to clear up that the micro bubbler is a stem for the arizer air not for the Lilly/daisy, incase anyone thought there was one for the Lilly.

Sorry mods
 
UnshavenFish,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
With the new 14mm right angle wpa, I imagine if you turn it upwards, you can sit a pwnt or fbomb hydrotube on there...
Sold my sunshinestore knock off so I can't test to be sure, but dont see why not
 

EmDeemo

ACCOUNT INACTIVE
Drum roll..........vapefiend now stock Lilly and daisy:clap:

Just ordered Lilly and WPA (WPA they added to the site while i was on the phone :rockon: So i could order it straight away)

And even bigger news is i also ordered that micro bubbler that people are talking about:science: (think they have around 500 so plenty to go around)

Should have it tomorrow will get a quick review up as soon as i can:tup:

Hmm... I wonder if this could help speed up getting an updated Lily ;-)
 
EmDeemo,

Yoosh

Well-Known Member
With the new 14mm right angle wpa, I imagine if you turn it upwards, you can sit a pwnt or fbomb hydrotube on there...
Sold my sunshinestore knock off so I can't test to be sure, but dont see why not

Yes you can and it's blissful. Lily + PNWT is intuitive to use and is one of the best uses for the PNWT I've tried so far. Big clouds + big taste. It brings my Lily experience up to Daisy levels imo.

You can't set it down on a table as quickly as you can with the Daisy but the filtration makes up for it.
 

tiukauleh

Well-Known Member
Yes you can and it's blissful. Lily + PNWT is intuitive to use and is one of the best uses for the PNWT I've tried so far. Big clouds + big taste. It brings my Lily experience up to Daisy levels imo.

You can't set it down on a table as quickly as you can with the Daisy but the filtration makes up for it.

how do you hold the whole set-up? one hand on the lily, one hand on the pnwt, one hand on the torch, ehh, that's one hand too many...:huh:
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
The tube should rest on the wpa no problem, use your mouth to stabilize.

I have to use my mouth to stavalize when I use it dry with my bent solo stem, since I still dont have any way to get it to stay in unfortunately...

Me and my friend were thinking Daisy could do hydrotube too, if its mouthpiece hole were just slightly larger, a tube could fit right in. Or maybe you could use silicone to rig a 14mm male adapter in there...
 

Mister G

Deceptively Old Fart
The tube should rest on the wpa no problem, use your mouth to stabilize.

I have to use my mouth to stavalize when I use it dry with my bent solo stem, since I still dont have any way to get it to stay in unfortunately...

Me and my friend were thinking Daisy could do hydrotube too, if its mouthpiece hole were just slightly larger, a tube could fit right in. Or maybe you could use silicone to rig a 14mm male adapter in there...

I vaguely recall someone posted that they put their PNWT into where Daisy's neck piece goes? I'll have to remember to try it when I get home, but I'll probably forget.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I vaguely recall someone posted that they put their PNWT into where Daisy's neck piece goes? I'll have to remember to try it when I get home, but I'll probably forget.

The tube is just a tad too wide for that though, me and my friend had tried it. They must've modded it somehow
 
Shit Snacks,
  • Like
Reactions: Yoosh

UnshavenFish

Well-Known Member
Ok so I've only my lily for about 6 hours and i might be jumping the gun here but wow:love:.

Such a simple thing at first glance but when you start to take it all in there is so much thought gone into this thing, it truly is capable of it all from thin wispy to full on cloud:clap: (i almost want to say better than my crafty for clouds but think i need to do more testing:science:)

Im using my Vapman lighter but with a bigger torch/flame (have to say lily with a Vapman sat either side is just pure wood porn:drool:)

Add glass and water and this thing milks for fun :rockon:Serious cloudage (thats a word right?:p)
I read for the WPA you use the o ring in a strange way and couldn't think how, so cut a solo o ring to fit and it gives a nice tight fit (not enough that i would worry about the glass) and means i can use it with only one hand holding the lighter and thats it:tup: (Leaving my other hand to stroke that lovely wood when i have the urge:rolleyes:)

So its early doors still, but i can see this being a long term relationship.

Edit: just to add in the box from vapefiend i got 8 screens an extra glass lighter funnel? Wood butter and spare o rings.
 
Last edited:

Yoosh

Well-Known Member
how do you hold the whole set-up? one hand on the lily, one hand on the pnwt, one hand on the torch, ehh, that's one hand too many...:huh:

It's actually less fiddly than it seems since the wpa stays stuck in Lily well and keeps the PNWT sturdy. You can hold Lily in one hand (w/ pnwt attached) and the torch in the other. I even pull off the top half of Lily and stir the bowl while the PNWT is still attached! :razz:


I vaguely recall someone posted that they put their PNWT into where Daisy's neck piece goes? I'll have to remember to try it when I get home, but I'll probably forget.

Yeah I think that was me, it works okay (maybe slight variations on neck size?) but definitely not as good as Lily + PNWT. Honestly I'm not sure that Daisy even needs it since I've never had problems with it being harsh. Lily can be a tad rougher though so that setup has been useful.

I'd love to try Daisy with a hydratube though...:whoa:

The tube is just a tad too wide for that though, me and my friend had tried it. They must've modded it somehow

I did end up modding it using the glass mp from my T1 + oring in Daisy's neck end to receive the PNWT. It works great but the T1 glass mps are hard to find. Personally I like the lazy boy style mouthpiece that comes with Daisy better and prefer the top down PNWT pov w/ the Lily.
 

Apathyball

Active Member
Just chiming in to say how awesome Lily is.

Lately I've been using her with a J-Hook and a 14mm male-to-male adapter. Fits right in the Lily mouthpiece hole and is quite stable. I like how it moves the heat intake further away from my face. Lily + J-hook + concentrates in cotton has knocked me silly quite a few times. :zzz:

I haven't picked up a WPA from Triihouse yet, but am planning on it. What an awesome vape from an awesome company :nod:
 

Apathyball

Active Member
5df208d2-6486-4ef2-ad5b-87ae6c5c1887.jpg


You can cover the opposite-side hole easily with an index finger if you adjust your grip. The vapor is noticeably cooler and I much prefer this over the Lily mouthpiece. You can also feel the J-Hook heating up in your hand as you pull; it's another way to gauge the temperature and your draw speed. I've done flower, wax, and hash through it and it works great. If I'm using flower, I tamp it down a bit so it doesn't fall to one side of the screen.
 

subway13029

Well-Known Member
I don't think I have enough hands for the job hook set up..lol..it looks like it would cool the hit nice..would be nice if the lily could sit upright..mine has three holes..and I cover two while tapping the one in middle..do you not have the updated lily?
 

hf

Active Member
probably a dumb question but I can't figure it out, how do you adjust the stock torch lighter? Lily is working good but want to try a smaller flame like the video posted a couple pages back
 
hf,

EmDeemo

ACCOUNT INACTIVE
probably a dumb question but I can't figure it out, how do you adjust the stock torch lighter? Lily is working good but want to try a smaller flame like the video posted a couple pages back

On the bottom of the lighter, there are notches and the flame can be turned up n down by turning them with a screwdriver
 
EmDeemo,

Apathyball

Active Member
I don't think I have enough hands for the job hook set up..lol..it looks like it would cool the hit nice..would be nice if the lily could sit upright..mine has three holes..and I cover two while tapping the one in middle..do you not have the updated lily?

It's actually not bad to hold and I have pretty small hands. My Lily has 3 holes but I only cover 1 when using the J-Hook. I just draw a little slower to raise the temp to compensate. It works well.

Another thing I do sometimes is use a MFLB water pipe whip. http://sales.magic-flight.com/water-pipe-whip-1/

The 14mm end fits in the Lily hole and the whip cools down the vapor well. That way with the whip in your mouth, you can position Lily any way you want.
 

UnshavenFish

Well-Known Member
MFLB water pipe whip

Great :clap: Just tried it and your right it cools and means you can adjust your view of the flame inlet :tup:, the slight restriction even seemed to give clouds easier/quicker (although more bowls are needed to confirm, all in the name of science :rofl:)

For me i quite like the heat/harshness so will probably stick to standard setup but can see for when friends are round or those wanting a smoother pull it will be useful.
 
Top Bottom