1. What does SSTB mean? See our glossary of acronyms.

JoDa Glassworks

Discussion in 'Glass' started by VaPeD&CoNfUsEd, May 5, 2014.

  1. farscaper

    farscaper Well-Known Member

    Messages:
    1,728
    speaking of slyme drips and per @VaPeD&CoNfUsEd request :wave:
    here is the joda revision.
    [​IMG]
     
  2. Rrose Selavy

    Rrose Selavy log enthusiast

    Messages:
    346
    Location:
    North Jersey
    so far that is my favorite @farscaper keep up the great work
     
    farscaper, Mr. Gweilo 420 and sasNW like this.
  3. Mr. Gweilo 420

    Mr. Gweilo 420 Dude

    Messages:
    1,078
    Location:
    The Far East
    that is really sensational man. I love it!

    edit: have just caught up with all versions and the entire thread. I think they are all great. great stuff!

    and as for Joda your progression is simply brilliant. Ive been following this thread sporadically and each time I check it out you seem to have progressed in leaps and bounds. Im going to pm you with an order in the next day or two as well :)
     
    Last edited: Aug 10, 2014
  4. llamaman001

    llamaman001 Well-Known Member

    Messages:
    956
    Very nice! My fav yet!
     
    VaPeD&CoNfUsEd likes this.
  5. Deja Vu

    Deja Vu i don't ever wanna go to bed

    Amazing!
     
    VaPeD&CoNfUsEd and farscaper like this.
  6. VaPeD&CoNfUsEd

    VaPeD&CoNfUsEd JoDa Glassworks Glass Blower

    Messages:
    1,886
    Location:
    Michigan
    Hey guys I was without power for 4 days last week and got a lil behind. Back in kickass mode now though. Packages are flying out the door.

    @llamaman001 @demonscars @wreckedred @blankrider and @exit all of your orders have shipped! You should see them by Wednesday. Sry for the delay.

    To the rest of you ima workin on it!

    Edit: also, I usually provide basket screens in every piece plus a spare for each piece but I'm running very low on screens so there are no spares but, every piece does have one installed.

    Sorry for the double post. Just wanted to show this lil guy off.

    [​IMG]
    [​IMG]
    Yes, they look good in red too!

    For you Claisen lovers, you really should check these out!
     
    Last edited by a moderator: Aug 12, 2014
  7. blankrider

    blankrider Well-Known Member

    Messages:
    605
    You should get a TI pen so you can start signing your work. It is sick and worthy of signature
     
  8. VaPeD&CoNfUsEd

    VaPeD&CoNfUsEd JoDa Glassworks Glass Blower

    Messages:
    1,886
    Location:
    Michigan
    I know. I really need one!
     
    SSVUN~YAH, sasNW, Ratchett and 2 others like this.
  9. Caligula

    Caligula Maximus

    Messages:
    6,897
    Location:
    SB420 Land!
    Maybe it's just me but I think that would be sweet if the bottom half of the carb tube was red so it looked like it was poring out at the drips
     
  10. VaPeD&CoNfUsEd

    VaPeD&CoNfUsEd JoDa Glassworks Glass Blower

    Messages:
    1,886
    Location:
    Michigan
    Omg that's what I thought as soon as it was finished too!
     
  11. Ratchett

    Ratchett Delta 3D Studios Designer Accessory Maker

    Messages:
    1,465
    I wanna see a really worked 19mm carb piece for the Nano - are you able to add maybe a few tentacles around the carb/downstem?

    I've got a really sick idea in my mind (Think giant squid, all you can see are tentacles devouring the Nano Stem coming out of the Nano...)

    Ok, time to put down the recycler and get back to 3D printing! :science:
     
    Reflections and Mr. Gweilo 420 like this.
  12. VaPeD&CoNfUsEd

    VaPeD&CoNfUsEd JoDa Glassworks Glass Blower

    Messages:
    1,886
    Location:
    Michigan
    I'll see what I can come up with. The mega Mai tai turns really earthy blues and grays and greens when encased in clear. Perfect for under sea types of work.
     
  13. Ratchett

    Ratchett Delta 3D Studios Designer Accessory Maker

    Messages:
    1,465
    I'm VERY interested in this - I'd be looking for a stem a bit longer so I have space for a bit of cotton (placed far away from the heat, below the carb) to act as an ABV filter to keep my glass clean.

    Looking for that visual of an octopus inside the Nano coming out and wrapping itself around the stem (and the carb stem) - Only looking to see the tentacles, not the squid itself.
     
    Last edited: Aug 11, 2014
    syrupy and Gray Area like this.
  14. demonscars

    demonscars Well-Known Member

    Messages:
    50
    I'm so excited to get my order, I'll be sitting by the door waiting for the postman all week I guess. :)
     
  15. blankrider

    blankrider Well-Known Member

    Messages:
    605
    I got mail! YAY!

    Check out this sweet matching set. This purchase was a 18mm carbed gong, pendent, and 14mm steam roller gong combo. @2clicker innovated the combo, thanks buddy. Colors are mega mai tai and slyme. Thank you very much @VaPeD&CoNfUsEd for hooking it up once again.
    [​IMG]
     
  16. CHIDOY

    CHIDOY Well-Known Member

    Messages:
    112
    wow.... amazing set!!!
     
  17. VaPeD&CoNfUsEd

    VaPeD&CoNfUsEd JoDa Glassworks Glass Blower

    Messages:
    1,886
    Location:
    Michigan
    Glad to see they made it safely. Hope you like. Enjoy!
     
  18. Tweak

    Tweak T\/\/34|<

    Messages:
    1,475
    I'm jealous, :drool:.

    Any way we can get a video of the Steam Roller in action? Does it milk up like a bubbler?

    Can't wait to get some funds, add to my JoDa collection. We just needs JoDa stickers and shirts made now, :rockon:
     
  19. VaPeD&CoNfUsEd

    VaPeD&CoNfUsEd JoDa Glassworks Glass Blower

    Messages:
    1,886
    Location:
    Michigan
    That's not a standard steamroller either. It's a tank compared to my standard ones. 20mm heavy wall glass right there.
     
    Ratchett, blankrider, Tweak and 2 others like this.
  20. 2clicker

    2clicker up to my ears in clams Accessory Maker

    Messages:
    3,643
    very nice! excellent work V&C!!! i owe you an order. unfortunately for me the funds have not been available.

    i just so happen to print shirts... :wave:
     
  21. farscaper

    farscaper Well-Known Member

    Messages:
    1,728
    @2clicker we may need to converse further on this!
     
    VaPeD&CoNfUsEd, Tweak and SSVUN~YAH like this.
  22. 2clicker

    2clicker up to my ears in clams Accessory Maker

    Messages:
    3,643
    ill shoot you a PM.

    cant wait to see what this JoDa character produces next. home grown talent n all.
     
  23. demonscars

    demonscars Well-Known Member

    Messages:
    50
    Woah almost a Teenage Mutant Ninja Turtles theme. Looks like I'm gonna have to get more Joda glass soon. But for now I got mail today as well!

    [​IMG]

    Ordered an 18mm pink slyme gong and a green revenger nano stem. Really nice and basic, with a touch of flair. Really great stuff. Stick one of these gongs on something from the cheap bubbler thread and you have a real original piece that looks like it cost a fortune. That steamroller and carb on that gong are awesome though!
     
  24. VaPeD&CoNfUsEd

    VaPeD&CoNfUsEd JoDa Glassworks Glass Blower

    Messages:
    1,886
    Location:
    Michigan
    Glad to see yours made it safely as well. Enjoy.
     
  25. DieHard

    DieHard Vertical transportation specialist.

    Messages:
    1,278
    Location:
    Limbo
    :ninja: :o :drool: :mmmm: :clap: Looks great! Can't wait for mine!
     

Support FC, visit our trusted friends and sponsors