1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

Help VapCap M Please

Discussion in 'Ask FC' started by Ricd, Aug 25, 2017.

  1. Ricd

    Ricd New Member

    Messages:
    20
    Location:
    Portugal
    hi guys

    Just receive my vapcap M yesterday.

    I tried to use, but didnt make any clouds. I feel the taste but nothing more.

    I respect the click, im using a triple torch from dynavap, and i heat a little far from the M for the matterial inside heat better.

    Can anyone help me please!?

    I just smoke Hash, and i bought this one because everyone said its amazing.

    So what am i doing wrong?

    Sorry about my english

    Many thanks

    Ricd
    Portugal
     
  2. howie105

    howie105 Well-Known Member

    Messages:
    1,109
    A few questions for you. Are you getting good air flow when you use the vape and what colour changes are you seeing in your hash after use?

    Don't worry about your english, it will all work out and welcome to the board.
     
  3. Ricd

    Ricd New Member

    Messages:
    20
    Location:
    Portugal
    Thanks for the answer.

    The M have a good air flow, and my hash just get a little bit more darker, but just a bit, almost nothing.

    Already put a big piece of hash inside, and a small piece but is the same. No clouds. Have some malleable hash and hard hash but both didnt work :-(

    I have a firefly2, and i take more and less 3 days to know how to do clouds on that. But the M seens very easy to use. To be honest dont now what to do.

    Single flame our hemp fiber will help guys?

    Thanks

    Ricd
    Portugal
     
    Last edited by a moderator: Aug 25, 2017
  4. snackmaster

    snackmaster Well-Known Member

    Messages:
    453
    So you're currently NOT using any hemp fiber or concentrate pad material in the cap? Just the hash?

    edit - Please ignore. I assumed hash needed fiber/etc, but it appears I am wrong.
     
    Last edited: Aug 25, 2017
    Ricd likes this.
  5. steama

    steama Well-Known Member

    Messages:
    3,388
    You don't need any hemp fiber or a concentrate pad to use your hash.

    Don't respect the click with hash. Try going three seconds past the click because you will need a little more heat for good results. Also be sure to fluff/crumble/break apart the hash before you put it into the vape.

    Good luck!

    :science:
     
    Vapor_Eyes, Ricd, Alexis and 3 others like this.
  6. howie105

    howie105 Well-Known Member

    Messages:
    1,109
    If the air flow is good and the hash is still not cooking, perhaps more heat will help. A little more lighter time or varying your draw rate might be worth a try.
     
    Vapor_Eyes, Ricd, Alexis and 2 others like this.
  7. Squiby

    Squiby Well-Known Member

    Messages:
    1,705
    The Vapcap is fantastic with hash. I vape both hard Moroccan hash and soft pliable Afghani hash. The trick for me is to create lots of surface area without crumbling the hash.

    For hard hash I slice the hash very thin using a razor blade and pop it directly into the Vapcap chamber. No hemp fiber or anything else.

    For soft hash I pinch off a bit and flatten it between my fingers to form a thin pancake. Again I just pop it into the herb chamber as is.

    I like to heat the Vapcap cap over it's bottom half (this is the end of the cap where the digger outter is attached) a good second or so past the click. The air intake hole located on the body should be covered with your finger as you pull vapor into your mouth. Do not pull the vapor directly into your lungs. Once you have pulled vapor into you mouth, you move your finger to allow cool fresh air in while you continue to pull and inhale the fresh air along with the mouth vapor.

    Hash takes a higher temp to vape nicely and produce clouds. So heating the bottom area of the cap and heating slightly longer coupled with mouth pulling should bring you the results you seek. Good luck!
     
    fågel, Roth, paehtod and 6 others like this.
  8. Whissmu

    Whissmu Well-Known Member

    Messages:
    243
    It needs more heat!
    As you have already been told by several members of FC .. provide more heat, when you hear click start counting 1second, 2s and test if the results are scarce increase the heat 1s, 2s, 3s and try ... so until you hit the bullseye !
    good luck!!
     
    Vapor_Eyes, Ricd, Alexis and 3 others like this.
  9. stark1

    stark1 Well known nut

    Messages:
    1,421
    Location:
    42.37/72.52
    A little more heat will do ya! :tup:

    Flame on!
     
    Last edited: Aug 30, 2017
    Ricd, Squiby and Whissmu like this.
  10. Krazy

    Krazy Well-Known Member

    Messages:
    466
    Location:
    up on a mountain
    I smoked nothing but hash back in the day (not with a VapeCap).

    As others have mentioned surface area and more heat will do the trick. Iv used hash a few times in both my Omni and my M simply to try it out. I heat past the click and make sure to rotate and heat the entire cap. I use a water filtration device; otherwise, be careful of hot vapor on your lungs.

    For non-hash concentrates? Someone recently mentioned this in the main VapeCap thread. http://fuckcombustion.com/threads/best-of-dynavap-vapcap.24345/#post-1145395
     
    Last edited: Aug 30, 2017
    Ricd, stark1, Whissmu and 2 others like this.
  11. Ricd

    Ricd New Member

    Messages:
    20
    Location:
    Portugal
    I guys

    I just heat more 2/3 sec after the click, and put the lighter more close to the M and now I have big clouds like you all said :-D

    I want to thank everyone for the help and advices.

    It's an awesome piece, when my friends saw me smoking on the M got very impressed.

    Many thanks

    Ricd
    Portugal
     
    fågel, Roth, paehtod and 9 others like this.
  12. Whissmu

    Whissmu Well-Known Member

    Messages:
    243
    Happy clouds friend !! :tup:

    Remember if you use green flowers --> respect the click !!!

    ..for everything else...
    .... mastercard !! Jis! jis! :rofl::rofl::rofl:
     
    GreenHopper and Squiby like this.
  13. peabreu

    peabreu New Member

    Messages:
    2

    Hi

    What about the FF2 with hash? Is it worth it?
    I use the Vapcap but would need something without lighter when on the move.
     
  14. Elfgrin

    Elfgrin Member

    Messages:
    23
    The chamber gets quite hot on the concentrates setting, though I've never tried hash in it I've put quite a bit through other vapes and I'm sure it'd be more than capable, especially with the surface area increasing techniques described above.
     

Support FC, visit our trusted friends and sponsors