Multi-brand HEALTHY RIPS FURY

HealthyRips.com

Healthy Rips Team
Company Rep
Is there a release for the capsules yet?

Hi, Yes - we just got word that the capsules will be finished on May 2nd. We should have them on our website by May 10th.

Any word when the backorders of the bubbler are to arrive?
Hi, Yes - the bubblers had a slight shipping delay - but should be delivered to us by tomorrow afternoon. We will work really hard to get them out tomorrow - but if they arrive late - it could be Friday. Thank you again for your patience - we got slammed during our 420 sale.

Thank you all so much for your support!
Healthy Rips Team
https://www.healthyrips.com
 
Last edited:

BabyFacedFinster

Anything worth doing, is worth overdoing.
Medium drags might be best. Say any pointers as to up performance? Best grind/pack/amount, etc. Also conduction isn't as great for me. So I'm looking forward to what the baskets offer.

I like a slow draw on my Fury 2. Whether it is the mp or wpa or bubbler I find a slow draw gives me good extraction and, most importantly, makes the hit easier on my throat and less chance of coughing.

I'm on the couch right now with the little bubbler hooked up. Just sipping the glass and taking some great hits on some Cheese indica. After a day like today, I needed a good indica.
 
Last edited:

CuckFumbustion

Lo and Behold! The transformative power of Vapor.
Thanks for the response @HealthyRips.com
I like a slow draw on my Fury 2.
Makes sense with design, although there in no restriction. Easy to rip. Trying to find that happy medium of draw strength comfort and good extraction. And in sync with the 4m sessions. Fast hits seem to make watery vapor that is harsh.

There is a 4m timer correct? Well at least I notice the countdown timer. Like that this particular vape has NO HEPTIC FEEDBACK and the display has 5 power bars instead of 3. I do finish my draw well after it shuts off. There is enough heat to make it worthwhile. I figure.

Really like that there is a tall wall on one side of the bowl. And that there is no prob removing the MP while it's on and say give it a quick stir or unclog the screen and pop on the MP. The twin lights inside illuminating the glass is cool as well.

Silicone cover save me a loose bag as well.

When I did my initial clean and burn offs, the silicone screens seemed to be the biggest source of any wonky taste, when I was taking empty test draws. I ISO cleaned them and the bottom of the vape with added attention and it seemed to help me with it until it got a little more broken in.

:peace:
 

lockie

Well-Known Member
Wow, real quick shipping, I got everything within 3 days of order (probably would've been 2 if they didn't send it to the same town twice lol). Gonna have fun using the glass pieces while I let the regular mouthpiece air out for a bit. Looking forward to testing all these different temps to see what works best, any suggestions for glass bubbler? Sips seems to work well. Real interested in more easily/quicker changed loads for on the go and just convenience in general. Currently for glass bubbler, it is a routine of basically just gently poke the grinder with one end of the glass, attach and sip away. Now experiments with the WPA XL so far is 2 long hits and done, nice big rips. Will try concentrates tomorrow after more tests...
 
Last edited:

elykpeace

exVASted
I suggest everyone hold the button down 3 seconds to turn the red and green indicator lights off while in a session (stealth mode) this way the extra battery is used twords possibly another session. :hmm:

Maybe the lights don't use much power but every drop dripped ova here :tup:
 

Southern Chef

Well-Known Member
I like using the F2 with the mouthpiece plate screen removed and just pop a Vapexhale ELB lid on top of the load, no furry bits get in the mouthpiece, only reclaim that way, just like in my CFX (The Azizer domes are too big for the F2).
Brilliant @LesPlenty
The EVO ELB top works great in place of the F2 mouthpiece silicon and screen. Much easier to clean and even less draw resistance. I'm using the ELBs for my EVO, my CFX and now my F2. Handy little things.
 

lockie

Well-Known Member
How's the taste with those ELB mesh baskets? I prefer the glass until the regular mouthpiece gets broken in for taste(i think it's the silicon/packaging) but it definitely still works on the go, bigger load without glass as well. Now to find a nice carry case to secure those ELB in the future..
 

MonkeyTime

Well-Known Member
How's the taste with those ELB mesh baskets? I prefer the glass until the regular mouthpiece gets broken in for taste(i think it's the silicon/packaging) but it definitely still works on the go, bigger load without glass as well. Now to find a nice carry case to secure those ELB in the future..

They're only using the ELB cap I believe, haven't had a chance to try this myself though. It's a replacement for the blue silicone/screen. I don't think a holder for them would solve anything
 
MonkeyTime,
  • Like
Reactions: Summer

CuckFumbustion

Lo and Behold! The transformative power of Vapor.
ever thought about glass capsules/baskets ?
I'm thinking about the thickness of the walls and some sort of lid or cover. What essentially would be a the business end of say an XL adapter to fit inside the oven. The lid or top(?) would have to fit with the glass bowl. Unless you pictured something else perhaps? @Mr.Sifter
The EVO ELB top works great in place of the F2 mouthpiece silicon and screen. Much easier to clean and even less draw resistance. I'm using the ELBs for my EVO, my CFX and now my F2. Handy little things.
So you abandoned the removable silicone screen underneath the MP.
I tried it inside the bowl, but the MP didn't fit quite as well.
So 2 ELB configs? one for the MP and one for the bowl?

I suggest everyone hold the button down 3 seconds to turn the red and green indicator lights off while in a session (stealth mode) this way the extra battery is used twords possibly another session. :hmm:

Maybe the lights don't use much power but every drop dripped ova here :tup:
Trying to get the most from one charge as well. Not sure if stealth mode is saving PWR because the board and electronics dictate that. The LEDs do seem bright, but it could be a dimmer switch situation. PWR going to the LEDs and being cut off before the LEDs could still be a drain. Depends.

3 things that seem almost universal for me.
1. All electronics that are hard wired to a battery have some sort of current going through it and the ON/OFF button is waiting for a button press. I have had electronics drain simply waiting for that button press.
2. Anything using a timer seems to drain electronics quicker. My phone drains considerably if I use the alarms or if an app relys on the clock. FURY 2 has the timer go when turned on.
3. Back to back Power on/off sessions drain the battery quicker. And high power drains things even further.
 
CuckFumbustion,

LesPlenty

Well-Known Member
Company Rep
Brilliant @LesPlenty
The EVO ELB top works great in place of the F2 mouthpiece silicon and screen.

I can` take credit for this, I saw it on a video, your draw resistance would be less without the blue silicon because you no longer have a proper seal on top of the bowl. Does the original mouthpiece form an airtight seal like the wpa does? Does covering the bottom air intake whilst you draw stop air flow completely?
I reverted my mouth piece to stock to see, but it leaks, is it normal to leak a bit?
 

paytonpenn

Level 30 Nature/Healer
I can` take credit for this, I saw it on a video, your draw resistance would be less without the blue silicon because you no longer have a proper seal on top of the bowl. Does the original mouthpiece form an airtight seal like the wpa does? Does covering the bottom air intake whilst you draw stop air flow completely?
I reverted my mouth piece to stock to see, but it leaks, is it normal to leak a bit?
You can still use the blue silicone without the metal screen. If you dont have that in place there is no seal and air leaks from the vapor path.

If blue silicone is used yes it will stop airflow entirely covering up the bottom hole.
 

lockie

Well-Known Member
Ahh yes, I misread it, just using the top piece to replace the blue silicon piece, no bottom piece, lol opps. It might be nice to have the option over the blue silicon screen since it does get lightweight decreased airflow with grinded herb if you inhale too hard, but it does create a nice seal so no herb gets through. Really looking forward to the new capsules, hope they're solid. The glass bubbler is still nice even when I forgot to add water so you can see the vapor path clear, gotta pick up some iso to keep this baby pristine, carefully too, I think the tilt stand works best atm (any suggestions for better stand?). I also noticed that the XL WPA just slides in the unit cold and easily wiggles when heated but the bubbler needs heat to insert, is that normal?

Heres a gif of it: https://imgur.com/a/YwuzZoz

So far, no problems with battery but I am charging it with my battery pack every time I'm finished. Really liking how efficient it is even when dry, now, Let's see how it holds up with more breaking in..
 
Last edited:
lockie,

LesPlenty

Well-Known Member
Company Rep
I've had entire seal on cold unit. I don't think temp affects it.

t does on mine. Maybe using the ELB has squished my blue seal a bit, I am not going to use the elb anymore, I am just going to replace the screen with a finer one.
 
LesPlenty,

MonkeyTime

Well-Known Member
PSA: the bubblers are very fragile. I literally knocked the piece over once on a wooden desk and the inner tube broke off. I’ve only had this about a month. :cry:

Is it still safe to use this? https://imgur.com/zo2xbDT
I suppose you could clean it thoroughly to ensure there's no glass shards, etc left inside and use it dry. It won't work like that with water anymore.
 

lockie

Well-Known Member
The bubbler is definitely a lighter piece so I leave it slightly tilted on its side against something in hopes that it won't move. I'm gonna buy some styrofoam to cut out for a mini case when I get some time. Current favorite method of loading is to enjoy the flower sandwiching live resin with more flower.

Just a friendly reminder, make sure you guys remember to ISO clean all the glass pieces before usage. A quick iso q-tip swab around the bowl to keep it fresh (maybe dry burn after). Rinse glass and mouthpiece along with silicon with warm water and enjoy!
 
lockie,
  • Like
Reactions: steama

BabyFacedFinster

Anything worth doing, is worth overdoing.
All hail to the Fury 2. This is a wonderful little vape. Huge delicious hits in a small, sturdy, and inexpensive package. It is a great vape for a night on the town.

Very happy I listened to all the great reviews.

:nod:

Nice :tup:

and we might only be 1-2 weeks away from those dosing caps too. I bought a new Jyarz container just to hold a bunch of pre-filled caps for any given road trip.
 

little maggie

Well-Known Member
The bubbler is definitely a lighter piece so I leave it slightly tilted on its side against something in hopes that it won't move. I'm gonna buy some styrofoam to cut out for a mini case when I get some time. Current favorite method of loading is to enjoy the flower sandwiching live resin with more flower.

Just a friendly reminder, make sure you guys remember to ISO clean all the glass pieces before usage. A quick iso q-tip swab around the bowl to keep it fresh (maybe dry burn after). Rinse glass and mouthpiece along with silicon with warm water and enjoy!
will washing with dishsoap be enough.
 
little maggie,

hinglemccringleberry

Well-Known Member
I know that one of the main issues with the Fury 1 was the silicone screwing up the taste. My question is, was it only coming from the stock mouthpiece? In other words, if you use the Fury 1 with a glass piece (bubbler, WPA, or bent stem), does that negate the taste issue?
 
hinglemccringleberry,
  • Like
Reactions: steama
Top Bottom