Good rig for enail

[Bad Ocelot]

So I think I'm going to take the plunge and get a proper enail & rig setup. Not gonna go real high-end, but want good flavor and functionality.

I was thinking something like this piece from grav labs:

About 7 or 8in tall, 3in base. Would probably get a dropdown as well to keep the heat a little further from the glass & lessen the reclaim in the perc holes. Think this would be good or would the weight of a coil-around-banger type set up make it likely to tip over?

Unfortunately this piece sold out before I was able to get one. Considering something similar from TAG but don't want anything huge or much over the $100-120 price range. Though I do really like those incyclers I've been seeing a lot of lately. Any suggestions?

 

[063_XOBX]

Look in the cheap high quality bubbler thread.

 

[Bad Ocelot]

Oh I have, but suffered a bit of information overload, ha.

I suppose I was mostly curious as to whether two chambers would be overkill or substantially reduce flavor? Also, I have no clue about how hefty a piece needs to be to support an enail.

If this should be merged into the bubbler thread, by all means stick it in there.

 

[063_XOBX]

The most popular Chinese rigs are the FC-710/Rattle Can, any of the the "Faberge" pieces (FTK, Straight or Egg) the D-Cycler knockoff and anything with a matrix perc.

That grav labs piece with 2 percs doesn't seem necessary to me. One showerhead would have probably worked better since you want the least diffusion possible for concentrates.

There are also recycler/incycler pieces that can use more water in a smaller piece by "recycling" it. They also vortex if they function right.

 

[Bad Ocelot]

Thanks! the grav labs piece is sold out, perusing some single chamber pieces on TAG now.

 

[clouded vision]

I used to dab a lot and have had a lot of rigs. My favorites were always small not a lot of water and very little diffusion. Dabs aren't really hot or harsh the way combustion is so too much water or diffusion really strips away the flavor. That grav lab is overkill IMO unless you plan to crank up the temp, but then why get an enail, just torch it till it glows and glob it on (obviously not being serious).

My 2 all time favorite rigs were both mini beakers, 1 had a 4 slit showerhead downstem and the other was a 2 hole diffy.

 

[mrbonsai420]

That is way more diffusion than you want for an Enail. Try an FC-710. Or if you are set on Gravlabs get the Bates-Diffusion pump rig. The flavor is unbeatable there.
But if you want a NICE piece of glass for a good deal, This guy creates pieces for TaG (you can see the similarity) This is by far the beat deal I have gotten on a piece of glass. It functions and looks like a $300 piece

http://www.dhgate.com/product/hemping-160610-10-quot-bent-neck-straight/387671923.html

Also if you are getting an enail you NEED A LIGER! That is the best paraphenalia purchase I have ever made. 10% off in my signature.
http://www.cca710.com/liger/

 

[Baron23]

if you are set on Gravlabs get the Bates-Diffusion pump rig. The flavor is unbeatable there.

@Bad Ocelot - below is link to a site where the Grav Labs collaboration with Bates is selling the Bates x Worm diffusion pump for $109. It may take a couple of weeks to get to you, but this site is solid and I have bought many things from them before. Not suggesting it, just offering it up as a possibility.

https://www.touchofmodern.com/sales/grav-labs/bates-worm-diffusion-pump

 

[Bad Ocelot]

thanks for all the tips! Looking more at something like this recycler now

It's only 7in tall, seems pretty reasonable. Someone bought the last 2nd quality one while it was in my cart so probably gonna have to hold off til next payday to get the unflawed version.

That is way more diffusion than you want for an Enail. Try an FC-710. Or if you are set on Gravlabs get the Bates-Diffusion pump rig. The flavor is unbeatable there.
But if you want a NICE piece of glass for a good deal, This guy creates pieces for TaG (you can see the similarity) This is by far the beat deal I have gotten on a piece of glass. It functions and looks like a $300 piece

http://www.dhgate.com/product/hemping-160610-10-quot-bent-neck-straight/387671923.html

Also if you are getting an enail you NEED A LIGER! That is the best paraphenalia purchase I have ever made. 10% off in my signature.
http://www.cca710.com/liger/

That is a good deal, may consider something like that, though a little bigger than I wanted. Got limited paraphernalia storage space these days. I need to do a purge, ha.

And the Liger is definitely on my list, but having to buy things kind of piecemeal for budgetary reasons. Gonna get an enail & a nice quartz banger first, then upgrade to the Liger in a couple months if I'm using it a lot.

@Bad Ocelot - below is link to a site where the Grav Labs collaboration with Bates is selling the Bates x Worm diffusion pump for $109. It may take a couple of weeks to get to you, but this site is solid and I have bought many things from them before. Not suggesting it, just offering it up as a possibility.

https://www.touchofmodern.com/sales/grav-labs/bates-worm-diffusion-pump

I'd considered that piece but it looks a bit fragile & easy to tip over. If I had a better place for it I'd pick it up for that price right now!

 

[hanfhead]

I really like the dcycler which is really similar to that. I have had one for over a year and recently broke it. I just got a replacement and it is way thicker and a little taller. Perfect for an enail, that's what I use it for. I have like 10+ bubblers and only use this one. http://www.dhgate.com/product/2016-upgraded-bigger-and-thicker-d-recycler/385602995.html

I posted some pics in the cheap glass thread here http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-897#post-1012764

 

[Bad Ocelot]

I really like the dcycler which is really similar to that. I have had one for over a year and recently broke it. I just got a replacement and it is way thicker and a little taller. Perfect for an enail, that's what I use it for. I have like 10+ bubblers and only use this one. http://www.dhgate.com/product/2016-upgraded-bigger-and-thicker-d-recycler/385602995.html

I posted some pics in the cheap glass thread here http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-897#post-1012764

Nice, given the price there I might just go that route to test the waters. Though it sounds like that piece is working quite well for you!

 

[mrbonsai420]

thanks for all the tips! Looking more at something like this recycler now

It's only 7in tall, seems pretty reasonable. Someone bought the last 2nd quality one while it was in my cart so probably gonna have to hold off til next payday to get the unflawed version.


That is a good deal, may consider something like that, though a little bigger than I wanted. Got limited paraphernalia storage space these days. I need to do a purge, ha.

And the Liger is definitely on my list, but having to buy things kind of piecemeal for budgetary reasons. Gonna get an enail & a nice quartz banger first, then upgrade to the Liger in a couple months if I'm using it a lot.



I'd considered that piece but it looks a bit fragile & easy to tip over. If I had a better place for it I'd pick it up for that price right now!

If that interests you pick this up from a fellow member.

Distilled Glass Recycler

 

[Bad Ocelot]

That's a sweet piece. Unfortunately don't have the $$ at the moment but will keep an eye on it. Thanks!

 

[nodrog]

Also if you are getting an enail you NEED A LIGER! That is the best paraphenalia purchase I have ever made. 10% off in my signature.
http://www.cca710.com/liger/

Seconded. The Liger is really, really awesome. You will NOT regret it.

 

[Bad Ocelot]

Ended up getting this Klein from dhgate. Anyone familiar with Headshop420? Can't wait to try it out! I wanted a smallish Klein with minimal diffusion, a bent neck piece, & small mouthpiece so this was pretty much ideal. Hopefully it's not too thin.

I'll definitely post some vortex porn after I receive it.

 

[Baron23]

Ended up getting this Klein from dhgate. Anyone familiar with Headshop420? Can't wait to try it out! I wanted a smallish Klein with minimal diffusion, a bent neck piece, & small mouthpiece so this was pretty much ideal. Hopefully it's not too thin.

I'll definitely post some vortex porn after I receive it.

Please post a link and do let us know how you like it when received.

 

[Bad Ocelot]

There were some shipping delays, but I received it in Nov. Works pretty well, not a great vortex, but for <$40 I'm not complaining. Just got my enail from Divine Tribe in the mail the other day so finally going to set it all up hopefully tonight, will post a pic soon. Anyone else use that enail?