1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

E-Nano from Epicvape

Discussion in 'Plug-in Vaporizers' started by ACE OF VAPE, Dec 7, 2012.

  1. ataxian

    ataxian PALE BLUE DOT

    Messages:
    11,480
    Location:
    Pacific Ocean
    I love the NANO 4 FLAVOR and general use!

    Right now my NANO is set 2 6.375 4 the strain I'm enjoying.

    DUTCH TREAT +NANO 6.375 + FC186 + ASH COLLECTOR (tornado action) = CIVILIZED

    Note: 18mm GonG packed loose 4 air flow however full of CANNABIS

    Level:7.452613425 out of 9.995 (need it to expand my mind)!

    F^CK it taste like CHOCOLATE + GRAPEFRUIT + ORANGE. (however not that bad?)

    Normally DT is grown in door's.
    This was grown outside by the water's edge (Pacific Ocean KINE) cheaper where I live!
     
    Last edited: May 4, 2018
  2. Whissmu

    Whissmu Well-Known Member

    Messages:
    444
    I am rotating between 3 essences; jasmine, lavender and roses .. my favorite is the jasmine! because my house just smells of fresh countryside of the mountains and in a few hours the fragrance of my aromatherapy invades my house including my terrace :worms:!
    my house left to be a smoker to be a steam home .... what not everyone knows is that 80% of the vapors go through my lungs with THC..Jis, jis, jis :rofl:

    -It's the Chewy2 grinder -> http://fuckcombustion.com/threads/chewy-2-0-portable-electric-grinder.25460/page-14#post-1243528

    -The same one that I use for my flowers-> 5,20 - 5,40 (and could lower the dial even more ... per not it will stink so much ... jjjejej)

    -The amount you see in the photo (half of the bowl) can last approximately with dial to 5.40 -> two days


    i do not see the photos as they told you ... but be careful with the converter :goon:! I would not be the first to cause fire due to bad connection, be careful :doh:... I, as a European, use a converter from 110v to 220v and do not connect it backwards or I will have a big scare :bang:
     
  3. ataxian

    ataxian PALE BLUE DOT

    Messages:
    11,480
    Location:
    Pacific Ocean

    My wife from FRANCE always put's JASSMINE in her POTPOURRI Machine.
    I do ROSIN before bed to be CIVILIZED.

    After a GonG of FLOWER.

    My wife never has tried CANNABIS?

    She is hot so I'll keep her. (very good shape?)

    I want to move back to FRANCE?

    She think's CALIFORNIA is a better environment! (My family is here)

    DUTCH TREAT from HOLLAND however grown outside. (CALIFORNIA)

    NANO 6.25 tonight = CIVILIZED (POV)

    DA wine is good here?
    + ZIP'S R cheap

    Too HOT though? (no winter this year)
     
  4. TaterLog

    TaterLog Real Human [baked] Bean

    Messages:
    16
    Maybe we can get your French no vaping wife together with my Cajun doctor no vaping wife and blow their heads off with copious amounts of vape bong rips. They're n00bz tho so we may have to be careful .
     
  5. slazak71

    slazak71 Active Member

    Messages:
    29
    i was in eletric shop once again and guy there said , everyting should be ok... i got conventer 220v to 110v and cant udenrstand why you suggest to put convetner 110 to 220 if the power hole is 220v in europe and e nano works on 110, so i should reduce power to 110 from 220 before it target e nano. Same was written by epicvape to buy conventer reducing power to 110v. Im wrong ? anyway big thanks for help :tup: hope everyting will be good with my enano and there is a easy answer to get started my enano, right now i dont know what to do else ...[​IMG]
     
    Last edited: May 5, 2018
  6. ataxian

    ataxian PALE BLUE DOT

    Messages:
    11,480
    Location:
    Pacific Ocean
    [​IMG]
    I had a crew on my POOL this week
    SWIMMING soon being well MEDICATED with NANO from: EPIC!.
    CIVILIZED!

    6.15243675 4 this mix of GSC + DUTCH TREAT + RAINBOW + CALIFORNIA RED MIXED = MEDICTED
     
  7. Whissmu

    Whissmu Well-Known Member

    Messages:
    444
    convert 220v to 110v for nano or 110v of your nano converted to 220v does not matter what you say ... I wanted to say do not connect your nano to 220v or your 110v (usa) plug to your european wall.

    my converter is different from yours ... mine has two plugs; one for 110v (the nano) and another for 220v (household plug) :goon:

    I can only warn you to be careful not to confuse the devices with the voltage that correspond
    sorry if not was clear or or confused him even more .. :bowdown::bowdown::bowdown:
     
  8. Summer

    Summer Well-Known Member

    Messages:
    1,831
    Location:
    Long Island, NY
    @Whissmu how about a pic of your converter & the plugs you are referring to. Might help @slazak71 with visuals.
     
  9. Whissmu

    Whissmu Well-Known Member

    Messages:
    444
    yesterday I found my post where I showed my converter, but unfortunately the images I think were deleted ...
    I will try to arrive at my home tomorrow, show you a picture!
     
    Vapor_Eyes, SSVUN~YAH, Summer and 2 others like this.
  10. Sparkpug

    Sparkpug Well-Known Member

    Messages:
    43
    Location:
    The Desert
    @Summer

    I ended up buying a kit from glasslung.com, because most of my rubber stuff is not food safe and probably is not the best choice for sealing a fitting inside the air path. I also need to revise my DIY setup to change where I put my downstem. Putting it on the side to replicate the oil barrel concentrate rig I had turns out to really pale in comparison next to the percolator that comes with the Glass Lung kit. The percolator is a 3D printed half doughnut ring with holes that fits perfectly inside the jar and offers a rather amazing and even percolation effect. I can absolutely fill my jar with excessive vapor now.

    For the mouthpiece I took one of my vapor hose fittings, slid the silicone bowl fitting thing the kit comes with over it and stuffed it into the open 14mmish (any 14mm male gong fits with the silicone sheathe thingy over it for a good seal), then I added my own tubing and attached my Sneaky Pete globe's mouthpiece (don't care for the globe but love the mouthpiece!) into the tubing's end. I did throw out the hookah hose it comes with, it reeked of chemicals and I had never intended to use it -why use plastic when I have glass?!

    The lid seems really stable and it comes with a silicone gasket that fits over the top lip of the jar perfectly making it super waterproof (my DIY isn't 100% water tight cause the gasket doesn't stay in place well enough after tightening the jar's lid.) All in all, I really like this setup. My E-Nano is super secure on top of the lid's 14mm intake fitting -it's actually an 18mm to 14mm female adapter sealed with a gasket inside a cup (with a nozzle on the bottom to attach tubing to the percolator) but looks easy enough to modify to put your own piece inside. However, after using the included perc I lost my desire to modify it. It works super well on its own.

    It has a magnet on the top to hold a lighter or dab tool but it really isn't strong enough to hold the E-pick in place, which is kind of a bummer. As for other negatives... I don't really have any. It takes all the work out of making a mason jar bong and it does so rather well. I think it pairs super nicely with my E-Nano. But the best part is that the lid fits on any wide-mouth ball jar. From the pint sized one I have up to a gallon. It also looks so much prettier than my DIY setup. Plus, since the lid is a 3D printed plastic it doesn't have a sharp edge like the stock lids do. I was cleaning my jar yesterday and cut my fingertip. It's shallow, but the ISO didn't care...

    I bought a carb cap adapter with a 10mm fitting from Thick Ass Glass so I could skip drilling anything into this very nice looking lid.

    Sorry for the wall of text :)
     
    Vapor_Eyes, CarolKing, Summer and 4 others like this.
  11. slazak71

    slazak71 Active Member

    Messages:
    29
    yea yea i know to not connect e nano to 220v
    the only way i connected my e nano was by conventer on the picture :) i will try text epic vape in mondey, maybe they will help somehow :science: have a good sunday everyone and once again thanks for your help :nod:
     
    Vapor_Eyes and SSVUN~YAH like this.
  12. BigJr48

    BigJr48 Well-Known Member

    Messages:
    597
    Location:
    New York, N.Y.
    This dyi looks great for outings, especially for the summer. I just wanted to know what is the perc made from, glass or plastic?
     
    SSVUN~YAH likes this.
  13. Hackerman

    Hackerman The Fool

    Messages:
    468
    Location:
    Moronica
    I am soooooo much missing my E-nano. It almost instantly became my daily go-to. I sent it in to fix the wood crack on Friday and I can't believe how much I miss it, already. LOL
     
  14. Summer

    Summer Well-Known Member

    Messages:
    1,831
    Location:
    Long Island, NY
    SSVUN~YAH and ataxian like this.
  15. Teaturtle

    Teaturtle Member

    Messages:
    24
    is it normal for the E-Nano to get too hot to hold after 7/10?
     
    SSVUN~YAH likes this.
  16. hd_rider

    hd_rider Well-Known Member

    Messages:
    345
    Location:
    Colorado
    One of the things I don't like is how hot the eNano gets during prolonged use. Granted, the wood does not get so hot to burn you, but I do find it uncomfortable enough that (until recently) I always grasped the eNano from the bottom inch or so, fingers above and below the cord.

    I have two nanos and find that the walnut one gets hotter than the cherry one. Maybe it has something to do with the type of wood?

    To help insulate against the heat, I made "Vaping Jacket" for my walnut eNano. I took some thick leather, dyed it brown, laid out a pattern, and stitched it up.

    It still gets hot after a while, but not as hot as the wood gets.

    [​IMG]
     
  17. Alegre

    Alegre Pobre payaso

    Messages:
    282
    Location:
    Third Rock From The Sun
    That's awesome! I need something like that for my walnut nano!

    Well done!
     
    Vapor_Eyes and SSVUN~YAH like this.
  18. Sparkpug

    Sparkpug Well-Known Member

    Messages:
    43
    Location:
    The Desert
    The glass lung one is 3D printed plastic with tubing connecting the percolator unit to the nozzle on the underside of the lid's cup assembly for the intake fitting. On a DIY setup you can put any stem (as long as it fits inside the jar) anywhere but I think the middle would work best and that's where I will put my input on my next DIY attempt.


    Once I get a new camera or borrow someone's phone (I don't have one... and they're really hard to use with my fingers anyway) I will post a pic. I already tossed my first DIY lid out though. I ordered some new steel tops and hookah supplies consisting of silicone sleeves like the one that comes with the Glass Lung so that should make it safer/better. I also found some silicone gaskets for the lid more in the style of the Glass Lung ones too. However I find the Glass Lung setup to work really well and need to convince myself to make another DIY one. It may be a while, using power tools and actively using my fingers causes an absolute ton of pain.

    However, making a template of the Glass Lung top might make making a new DIY top a bit easier. I've thought about getting some plexiglass cut to the right diameter to make making more of these easier.
     
  19. Whissmu

    Whissmu Well-Known Member

    Messages:
    444
    [​IMG]
     
  20. Teaturtle

    Teaturtle Member

    Messages:
    24
    @hd_rider
    That is a beautiful pack you made. I'm gonna have to figure something out like that. If I don't stop breaking things. Few days after getting all this stuff shipped to Canada I drop the Gong. Next day I drop the Bong. >:(

    New rule for me: only vaping on the floor.
     
  21. slazak71

    slazak71 Active Member

    Messages:
    29
    @Whissmu thak you for a photo ! im waiting for a new cord but while this i just share my little monster :) waiting[​IMG]
     
  22. Sparkpug

    Sparkpug Well-Known Member

    Messages:
    43
    Location:
    The Desert
    Thinking about odd sounds and cracks. I may have heard mine crack, but it didn't sound like metal clanking. It sounded like... I used to run a water cooling setup for cooling my computer and the pump used to gargle. It sounded like a pump gargled really loudly, then nothing. I had no idea what it was. Haven't heard it since.

    @Summer Alrighty. I think I found something better than drilling. I used a small knockout in the collection of tools my grandpa gave me. It's about 20mm, and it makes a perfectly round hole. A hookah grommet over an 18mm female fitting is perfectly sized for the hole, more so if the fitting has a wide lip on it and can be secured in the metal lid. The knockouts are much easier to use, until it comes to removing the knocked-out metal from it... But this way it will easily support anything with a good fit. The main flaw with the stock lids is how thin they are, so they tend to warp. My 1st top had warped quite a bit. Knocked out holes seem to make the lid more stable, and I'd like to add 2 of these holes to a heavier duty all in one-metal-lid.

    Should have pics shortly, after I finish building this one.
     
  23. Hackerman

    Hackerman The Fool

    Messages:
    468
    Location:
    Moronica
    I hear mine too. I sent it in for repairs last week and it arrived yesterday. Since my E-nano and I bonded instantly, I can hear my E-nano right now. She is telling me someone is wiping her with a nice soft cloth so she must be on the bench being repaired.

    I will "feel" it when she ships and is on her way back to me.

    Me and my E-Nano....... just like Me and Marley. ;)
     
  24. Alegre

    Alegre Pobre payaso

    Messages:
    282
    Location:
    Third Rock From The Sun
    Is there a discount code for fc users? I really need one of the adjustable bowl stems!
     
    SSVUN~YAH likes this.
  25. Stu

    Stu Maconheiro Staff Member

    Messages:
    9,025
    Location:
    southeast of disorder
    You can use the code: 'FCfreeship' for free shipping on all orders to US and Canada.

    :peace:
     

Support FC, visit our trusted friends and sponsors