1. What does SSTB mean? See our glossary of acronyms.

E-Nano from Epicvape

Discussion in 'Plug-in Vaporizers' started by ACE OF VAPE, Dec 7, 2012.

  1. newVaper420

    newVaper420 Vapor Enthusiast

    Messages:
    888
    Man! Custom designs!!! A Hello Kitty E-Nano (I assume)?

    That's awesome! :-) I can't wait to see other designs LOL! Hoping mine gets here soon!
  2. treecityrnd

    treecityrnd Active Member

    Messages:
    515
    My glass stem arsenal:
    [​IMG]
    From Left to Right:
    3.5" HI Turbo Tube (for Nano direct draw & 14mm H20)
    2.5" HI Turbo Tube (for Nano and 14mm H20)
    NEW 18mm All Glass Andy Tube (for Nano and Mobius, thank you!!!)
    18-18mm male-male joint (for EV2 and Mobius)
    LSV shorty wand (18mm for EV2 direct draw)
    DBV wand (18mm for EV2 direct draw and whip if necessary)
    Glass Aromatherapy cup (for Nano and other logs)

    Loving the new 18mm Nano stem! It's a little long but the Nano has plenty of heat to get the job done.

    6.5 is about where I have mine also. It's pretty hot at 6.5, would be maxed out on other log vapes. I'd venture to say you could combust on 8 if you had a slow draw and the port were close to your load. It's a hot little girl...or kitty?
    Quick Nano Review: I like the open core design (similar to the HI for reference, not a closed core like an UD or Zap. It makes the airflow less restricted and you can blast through a load if you want. This is a power hitter, don't kid yourself because of the size. But because of the port size, you can use almost any UD, HI or other "over the port" stem. More laters...Enjoy your Nanos!
    BLAZING OG and charliedontsurf like this.
  3. ACE OF VAPE

    ACE OF VAPE Vape outside the box Manufacturer

    Messages:
    402
    Glad you're loving the E-Nano. Nothing makes a designer/builder happier!
    Working on the instruction page. Here's what I do. Your results may vary.
    1) Turn on E-Nano to 10
    2) Put a small amount of Herb (.08-.15g) into the glass stem. (I don't grind it first)
    3) After 2mins turn E-Nano down to 5-6. Pick up the E-Nano and carefully put the wand onto the heater until it stops. Inhale smoothly, Enjoy. Repeat, stir, repeat. Enjoy.
    4) Turn E-Nano off... Or not.
  4. treecityrnd

    treecityrnd Active Member

    Messages:
    515
    You missed a couple "repeats" there...

    Just posted this in the EV2 thread, but I wanted to repeat it here. The best ACT-like comparison I can make is (IMHO):
    EV2 is to LSV as Nano is to UD/HI

    Genius!
    v v v
    newVaper420 likes this.
  5. ACE OF VAPE

    ACE OF VAPE Vape outside the box Manufacturer

    Messages:
    402
    Saftey Tip: no more burned fingers.
    [​IMG]
    Doug, gvape, SativaLover420 and 2 others like this.
  6. newVaper420

    newVaper420 Vapor Enthusiast

    Messages:
    888
    Nice! I already have 2 E-Pik's (i think they are shorter than yours though). :-)
  7. momofthegoons

    momofthegoons vapor accessory addict Staff Member

    Messages:
    5,802
    Well tree, it looks like you finally found the log vape you were looking for; one with all glass stems. :tup:

    Is that the one with the glass screen?
  8. slowandsteady

    slowandsteady Member

    Messages:
    274
    That is awesome! Truly one of a kind. Must be an inside joke you have with Andy.
    newVaper420 likes this.
  9. ACE OF VAPE

    ACE OF VAPE Vape outside the box Manufacturer

    Messages:
    402
    Hello Kitty E-Nano's will be available for pre-order very soon.
    SativaLover420 and newVaper420 like this.
  10. slowandsteady

    slowandsteady Member

    Messages:
    274
    Which is why I will be getting both. :clap:
  11. treecityrnd

    treecityrnd Active Member

    Messages:
    515
    I wish is was the delux all boro-glass stem (the direct draw stem with the honeycomb screen) However, it did not come with this shipment. I hope they'll be available soon. ALL glass + 18mm is the Holy Grail
    [​IMG]

    Exactly! And the price is (more than) right.
  12. newVaper420

    newVaper420 Vapor Enthusiast

    Messages:
    888
    How long does it take to change temperatures from 10 to 5?
  13. ACE OF VAPE

    ACE OF VAPE Vape outside the box Manufacturer

    Messages:
    402

    The heating element reacts Immediately. If you leave it on 10 you will get combustion.
  14. toros23

    toros23 Well-Known Member

    Messages:
    948
    Location:
    West Coast
    WOO HOO, just got my GonG adapter! Thanks Andy!

    Excited to see others getting to enjoy the E-Nano. I'm getting so spoiled with this little guy and the new adapter will make it even better. As a beta tester there really isn't much to report other than what has already been said. Endless power in a small/perfect package. Getting 4 to 5 really nice rips with .1 to .14 of good material.
    BLAZING OG and ogcook like this.
  15. slowandsteady

    slowandsteady Member

    Messages:
    274
    Where are the pictures?? :D
  16. SativaLover420

    SativaLover420 Stoner

    Messages:
    146
    Location:
    Where the Grass is GREENER
    Really interested in a hellp kitty one! All jokes aside haha. Will you guys be doing other desigbs or mayne customized designs. Looking really nice.
  17. toros23

    toros23 Well-Known Member

    Messages:
    948
    Location:
    West Coast
    Pictures of what? The GonG or the E-Nano??
  18. slowandsteady

    slowandsteady Member

    Messages:
    274
    Preferably the GonG, but I'll take whatever your willing to do . . . HAHA.
  19. ACE OF VAPE

    ACE OF VAPE Vape outside the box Manufacturer

    Messages:
    402
    yes and yes.
  20. toros23

    toros23 Well-Known Member

    Messages:
    948
    Location:
    West Coast
    Scroll up and you can see a photo of the GonG in the post from treecityrnd. It has 7 tiny holes and is about 3/4" tall by about 1/2" in diameter at the end (tapers down to 3/8"). I posted a photo of the E-Nano a while back on page 3, it is the same photo as on the epic site.

    I tried to get some video but could not do it justice.
  21. shredhead

    shredhead Specialist

    Messages:
    693
    Location:
    Canada
    Kinda wish I got the 18 mm adapter for a change up from silicone. Oh well I'll live I'm sure!!
  22. Ed's TnT

    Ed's TnT Woodsman Manufacturer

    Messages:
    1,942
    Time for some pics, this thing is so clean and well put together I am so digging its look. I started it out at 8 on the dial, to warm it up then dialed it back to 5 where it gave great vapor. I quickly learned that you dont need to grind the herb, it can simply be crumbled between your fingers. I started using the stem with the glass screen. If the grind is to fine you will inhale the small bits. But no big deal, get your load right and place it over the heater core. It provides really great vapor and out performed the one I tried back in August. I have some Blue Widow left, only a couple small buds but wanted my first hits to be of the best. I hit it 3 times and was really coughing after each one. I had to set the stem down and back off of it for a minute, I was baked. I like how it has epicvape over the indicator light. The label on the dial really helps too. I have only had a couple stems out of it yesterday and have the next two days to really explore it. I am so glad I have one of these and cant wait to get to know it more.

    Andy you have really made a great piece and I am super happy for you and know this is gonna be a success.

    Well done man, well done!

    [​IMG]

    [​IMG]

    [​IMG]
  23. Shad0w99

    Shad0w99 New Member

    Messages:
    14
    hoping for more user videos! ( please show the amount of herb used if possible )

    How is the efficiency of the E-nano? Those of you who have multiple vaporizers, where would you place the E-nano in terms of efficiency?

    Thank you
    newVaper420 likes this.
  24. al bundy

    al bundy Vaporist

    Messages:
    603
    Location:
    S.I.N.Y.
    Rats I'm still pending and I ordered Friday.
    Dig the Hello Kitty
    (showed my 6year old the hello Kitty "hand warmer "and she loves it!!)
    SativaLover420 and newVaper420 like this.
  25. newVaper420

    newVaper420 Vapor Enthusiast

    Messages:
    888
    Oh, I just looked at the website. They added a new "All Glass 18mm GonG" adapter. Shit, I would have ordered that if it was up there. Now I might have to make another order. I didn't realize there was going to be two sets on GonG's.

Support FC, visit our trusted friends and sponsors