1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

DDave Mod, New DDave Mini Mod & Kit for Arizer EQ/VTower Vapes

Discussion in 'Vapor Related Equipment' started by DDave, Aug 7, 2015.

  1. Jillybean

    Jillybean New Member

    Messages:
    8
    I wasn't exactly sure if this would be the correct thread for this, but since it might be of interest for future developments I decided to post it here.

    From what I understand the EQ doesn't work too well with concentrates since the heating element is below the bowl. So everything that goes beyond a little bit of wax packed with some herb will cause oil to drop onto the screen and the heating element.

    Now, I don't think such a piece exists, but do you think the following design might work?

    [​IMG]

    The "dish" that holds the concentrate would be heated by the rising air. The dish should be as close to the heating element as possible. This would mean the concentrate in the dish would be heated by a mixture of conduction and convection.

    It's nothing serious, just a thought on what might make the EQ a bit more suitable for concentrates. Maybe this design wouldn't work at all, that's why I thought I'd just put it out there.
     
    CuckFumbustion likes this.
  2. Laantje

    Laantje Active Member

    Messages:
    29
    Location:
    The Netherlands
    Thanks for the reply man :)

    Could you perhaps send me a PM if you have the 18mm only kit back in stock? Right now I have to save up some money but I'm going to buy one somewhere not too far in the future.

    As for my previous question, I feel kinda dump lol. The difference between 18mm & 14mm you meant is the size of the cyclone bowl lol, I thought it was for a specific connector at the end of the tube.

    My extreme Q is arriving today but as far as I read the new packages only come with 1 elbow whereas the other one is replaced by a new one specially for the balloon. If I get it right, you offer a straight connector with the kit that fits in the cyclone bowl right? Because then I can just use the stock elbow adapter for my bubbler.
     
    CuckFumbustion and DDave like this.
  3. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
    No problem. I have an email list going so I can notify those interested. Can you PM your email address and I'll add you to the list?

    The eq kits I offer come with a wand (replaces elbow) and water tool adapter choice of 14mm or 18mm. The complete kit comes with both sizes.

    :rockon:
     
    CuckFumbustion and Laantje like this.
  4. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
    Hey Vape Family! :wave:

    Am very happy to announce that I've received stock of glass pieces.
    They are beautiful, same quality as last batch from a new glass supplier.

    To this end, I've opened up www.ddavemods.com listings for these kits.


    I have a bit of bad news as well. It would seem as of lately that my luck with carriers is not the best. Over a month ago, I reordered more herb loading funnel stock and it may appear that the shipment was lost. I've opened a claim with the carrier and in anticipation of them telling me my packages were lost, I've also ordered another batch of funnels.


    If you do choose to order an 18mm Kit now, you will receive an email asking if you'd like the order shipped ASAP or held until the arrival of the funnels.

    Best Regards My Friends,
    DDave

    PS. Questions, comments or if you want to vent about your own shipping experiences, always feel free to reach out to me!

    PS#2: If you were on my mailing list, you've also received a copy of this message in email....

    Vape On!
     
  5. TwistedGray

    TwistedGray Well-Known Member

    Messages:
    435
    Exciting!
     
    CuckFumbustion and DDave like this.
  6. Laantje

    Laantje Active Member

    Messages:
    29
    Location:
    The Netherlands
    Welp, I did it. I bought the 18mm kit. I forgot mentioning that I have a 18mm bong though. I emailed you about this. In the notes of my order it will say its me, so you can check that.

    Hopefully it won't break on its way, I'm excited! I will post a review :)
     
    CuckFumbustion and DDave like this.
  7. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
    Got your message my friend. Will ensure you receive the 18mm Water tool adapter with your kit.
    ===========================================================================================
    Just received feedback this morning from a previous kit recipient.... Wanted to share it!

    (Recipient feedback.....)
    "...I was shocked at how little product was required to get a decent effect, and it's literally half of what I was wasting in my Elbow pack basket method with the stock parts."
     
  8. bkpnsux

    bkpnsux Active Member

    Messages:
    50
    DDave I just placed my order now and am VERY excited! Can't wait to try it out!
    I also forgot to specify 18mm or 14mm for water tool but sent you an email. Thanks again and I will also review once received..
     
    CuckFumbustion and DDave like this.
  9. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
    Hey bkpnsux, got your message and got you covered! Kit shipped!

    Enjoy!
    DDave :rockon:
     
    CuckFumbustion, Laantje and bkpnsux like this.
  10. forkup

    forkup Member

    Messages:
    3
    Not sure I'm posting in the correct place but here goes.

    I just wanted to give ddave a shoutout for making the glassware that makes my eq rock. I bought the full kit and have used it daily over a year now.

    I managed to break a couple of the bowls but he had replacements when I needed them.

    Ddave mods ftw!
     
  11. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
    Thanks for the feedback friend, glad you're enjoying the mod kit!!!

    :rockon:
     
    CuckFumbustion likes this.
  12. little maggie

    little maggie Well-Known Member

    Messages:
    2,639
    I just wrote a question on your website without reading your FAQ. Learned my lesson. I just want to comment here that I use your mods with all kinds of vapes- not just the EQ.
     
    CuckFumbustion, grokit and DDave like this.
  13. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
    Friends,

    V3 is here! Check them out at www.DDaveMods.com

    :rockon:

    (Note: currently working out details of a Concentration Chamber for 18mm and 14mm Only kits. Stay tuned.).
     
  14. Jillybean

    Jillybean New Member

    Messages:
    8
    That's awesome, love the idea of a glass filter!

    Is there going to be a complete kit again? I currently don't see one listed on your website. Also, is there no herb loading funnel included in v3 anymore?
     
    CuckFumbustion likes this.
  15. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
    Last edited: Mar 30, 2017
    CuckFumbustion and jimfish4130 like this.
  16. Jillybean

    Jillybean New Member

    Messages:
    8
    Ordered! I'm excited!
     
    CuckFumbustion and DDave like this.
  17. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
    Thanks, will get this packed and shipped out ASAP!
     
    CuckFumbustion, Laantje and Jillybean like this.
  18. herbivore21

    herbivore21 Well-Known Member

    Messages:
    4,278
    Holy shit bro, just noticed your vapor cooler for the vapcap range! I'd love to get in on that, could you provide some info with dimensions/size info? Also any function videos?

    Keep up the great work, my friend! :D :leaf:

    EDIT: Lol just found your video on the page, oops!

    Just out of interest, can it be used with water too?
     
    Last edited: Mar 30, 2017
    CuckFumbustion, grokit and DDave like this.
  19. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
    My friend, no problem.... more pics to follow.

    Yes, that cooler can be used with water. But tried it dry and was surprised. Cool and more flavor than when I used water.
     
  20. herbivore21

    herbivore21 Well-Known Member

    Messages:
    4,278
    100% the same as my experiences brother :D Sometimes all we need is just a little longer of a vapor path to cool the vapor enough ;)

    I shall be in touch, old friend!
     
    CuckFumbustion and DDave like this.
  21. little maggie

    little maggie Well-Known Member

    Messages:
    2,639
    And I just ordered 2.5. And just needed to wait a few days to get 3.:(
     
    CuckFumbustion and DDave like this.
  22. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
  23. DDave

    DDave Vape Wizard Accessory Maker

    Messages:
    3,803
    Location:
    Judge the Vaper by the Vapor
    Followup: Video of .016g full extraction in one hit... plus close up of The Extraction in Action at the end! Enjoy!

    Click to play YouTube Video
     
  24. little maggie

    little maggie Well-Known Member

    Messages:
    2,639
    Any possibility of an upgrade fir 2.5 owners? I do have one for my milaana and I usually use hemp as a cushion.
     
    CuckFumbustion likes this.
  25. Laantje

    Laantje Active Member

    Messages:
    29
    Location:
    The Netherlands
    Received the kit yesterday! It was here a few days earlier but I wasn't at home, and I was required to pay extra tax for it so they couldn't drop it off at the neighbours.

    Tried it out asap, beginning with the whip through water tool.

    Maaaan I got way too high, I really like it. But, my Arizer Air somehow gives thicker, mikier clouds which look more satisfying, especially through a water piece. The extreme Q + your mod does make me higher, which is what I want. But it still looks like there is barely any vapor for some reason.

    I haven't used the extreme q through a water piece before, so I don't know if I should expect thicker, milkier vape, but I always had the idea that a desktop vape would be able to produce thicker clouds, I see this alot in videos aswell. This does not disappoint me, since for me its all about the high, but I expected more vapor in the first place. Maybe I've got the wrong idea though.

    I'm using the wand, the 18mm f/f adapter and the 18mm water piece adapter all connected with the included tube. Is it perhaps better to use the stock tube instead?

    As for the balloon, which I mainly use the extreme q for lately, it is perfect! Damn that thing goes full of vapor with your mod, it amazed me! Got me knocked out too, exactly what I wanted!

    I am very satisfied, thank you very much! I guess I still have to figure out how to use the extreme q the best way, but so far so good! Will recommend this mod to people.
     
    DDave and CuckFumbustion like this.

Support FC, visit our trusted friends and sponsors