1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

Dabpress Rosin Plates

Discussion in 'Vapor Related Equipment' started by dabpress.com, Jan 19, 2018.

  1. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    Anodization is a industrial craft used on the metal surface. It'll improve the metal corrosion resistance, hardness, heat resistance.
    You may click below link to see how it looks like:
    https://www.dabpress.com/products/dp-rp37-diy-rosin-heat-plates

    And how to use anodized rosin plate kit? Watch the youtube video now:
    Click to play YouTube Video
     
  2. lazylathe

    lazylathe Almost there...

    Messages:
    4,032
    Location:
    SouthWest Ontario, Canada
    @biohacker

    Caged plate kit. Not sure if it is good though... Price seems good!
     
    dabpress.com and biohacker like this.
  3. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    To be honest. It is no more features about our cube but anodized real food grade. Pid temp box is pround. It is three times bigger than other's. Very good quality parts used to it. And cable is non-broken design. You can check it out on amazon.ca and try it.

    Anyone who have great followers wanna review our products. You welcome!
    But you MUST give us an unbaised comment on amazon.

    Thank you guys
     
    Last edited: Jan 19, 2018
    grokit likes this.
  4. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    @dabpress.com How much for just the caged plates, no PID/elements?
     
  5. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    Last edited by a moderator: Jan 22, 2018
  6. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    Product Features:
    • Made Of 6061 Aluminum Blocks
    • Hard Anodized Aluminum
    • Dual Digital PID Temperature Controller
    • Stainless Steel Heat Rod
    • Adjust Each Plate Temperature Independently
    • Stable Temperature Control System
    • Bronze Tube Guarantee Lifelong Working
    • Real Food Grade
    • Real High Yield
     
    grokit and Edgedamage like this.
  7. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    Roger, is the PID calibrated so that it matches the surface temperature of the plates? Can you also provide heatup times for 220F approx?
     
  8. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    It is about 8 mins to reach 220F
     
  9. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    Roger, can you tell me about the metal mesh screens? Do they scratch the plates?
     
  10. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    Click to play YouTube Video


    Happy birth to myself , Thank forum Admin
     
    Last edited by a moderator: Jan 27, 2018
  11. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    Received caged plates today from China. Due to rural living, shipping took 4 business days, not bad. I will post a review this weekend I hope, initial impression is the plates are very solid construction and heavy. I have the 3x7 caged plates. Plates are heating up now for a test squish at 200F.

    Roger, your estimate of 8 mins seems to be pretty close. I am checking the temp reading with my IR gun on the anodized plate and during the preheat the plates are registering about 20F lower than the PID, will check back once it's preheated a bit.
     
    lazylathe and dabpress.com like this.
  12. FlyingLow

    FlyingLow Team NO SLEEP!

    Messages:
    3,175
  13. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    I am glad you received anodized rosin cube kit.

    It is digital temp controller that need over 3-time use then PV will be closed to SV.

    Thank you

    Roger
     
    lazylathe and psychonaut like this.
  14. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    27% yield on an unfiltered press of a beautiful top cola nug (nug was in a 62% RH mason jar). The plates moved smoothly through the bolts on the cage and lined up perfectly. The annodized plates make checking temperature very simple with an IR thermometer gun.

    Ill be making a youtube video today or tomorrow to go over the product for our members.

    Initial thoughts are positive. The 3x7 plates are rated up to 20T and I am well below at 12T. At this time I don't see a reason to upgrade the jack to 20T.

    [​IMG]
     
  15. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    3,416
    Location:
    Berlin, Germany
    @Roger, your caged plates seem not to be insulated, am I right? Do you have one with insulation and which material do you use for?
     
    herbivore21 likes this.
  16. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    It must be insulated, Otherwise it will be dangerous in use.
    Heaters made of stainless steel,resistance and Mica insulated materials. Cable of heater is also made by heat-resistant tube guarantee it can work under 300 F
     
  17. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    Full disclosure. This kit was paid for by me and in lieu of doing a review of the product, unbiased as I can be given this is a $400 kit, I will be reimbursed for the kit with the option to return it for a full refund.

    I did the review mostly from a DIY'ers perspective, so I assume folks have an understanding of how a shop press is assembled and works.

    Here's my review. It starts out with a couple of squishes then a brief overview of the kit with my opinions and also some comparisons to non-caged / non-anodized budget plate kit from dhgate.

    Click to play YouTube Video
     
    grokit, zor, mc and 3 others like this.
  18. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    Thank you for your unbiased review .. :)
     
    psychonaut likes this.
  19. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    3,416
    Location:
    Berlin, Germany
    Thanks, but that I didn't mean. That is a matter of course. It would really be awful if the heater and cables wouldn't be insulated!
    No, for sure I meant insulation of the PLATES. It's no fun to work with the press for a few hours when heat of the plates is going on to the hydraulics
     
  20. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    It is really good questions;)
    Currently we just prepare a piece of bamboo in the package of unit. It was placed between plates and hydraulic.
    In fact, We are trying to find good heat-resistant material to separate hot plate and cold plate. We also made a lot of test. But after one hour working, cold and hot plate will have the same temperature.

    Do you have any suggestions?

    Thank you

    Roger
     
  21. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    3,416
    Location:
    Berlin, Germany
    Some use Themalate H330, some G10 FR4 Glass Epoxy Sheet. And there are other good insulating materials around.
     
  22. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    Thank you very much! I will make a test with them.
    Have a nice day
     
    Hogni likes this.
  23. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    I had tried with FR4 and it only last one hour then get the same temp.
    Maybe i will try more different material in future.
     
  24. dabpress.com

    dabpress.com Well-Known Member Manufacturer

    Messages:
    241
    Click to play YouTube Video


    Customer made diy desk hydraulic rosin press. Nice handmade press!
     
  25. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    Hey guys and gals, I wanted to share a squish, just pressing small amounts for short term consumption. I hope you enjoy :peace:

    Click to play YouTube Video
     
    grokit, Hogni, mixchu69 and 1 other person like this.

Support FC, visit our trusted friends and sponsors