1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

Custom 3D Printed Vape Accessories - Delta 3D Studios

Discussion in 'Vapor Related Equipment' started by Ratchett, Mar 13, 2014.

  1. Gigsabits53

    Gigsabits53 Well-Known Member

    Messages:
    265
    @Ratchett that looks like another winner. I have a few vapes where this will come in real handy. I am sure I will be spending some more money in your shop. :)
     
  2. GreenHopper

    GreenHopper 20 going on 60

    Messages:
    1,406
  3. TeeJay1952

    TeeJay1952 Well-Known Member

    Messages:
    1,751
  4. Gigsabits53

    Gigsabits53 Well-Known Member

    Messages:
    265
    Received my package today, about a week from order, I consider that very reasonable.

    I am loving the spittoon!! It could be just that I have been wanting something like this for a long time, but what a nice little gadget to use.

    I also purchased one of the E-nano urchins. I dont own an e-nano but this thing works great for my various stems and vape tools, very handy.

    The other items were some cleaning plugs, always a nice item to have for cleaning your glass. I ordered two and they threw in two freebies. Also picked up one of those little scoop and poke tools, great for loading up your vape.

    Guys and gals, if you have not checked out Delta 3D, you are missing out.

    @Ratchett thank you very much!! :clap:
     
  5. Bad Ocelot

    Bad Ocelot Well-Known Member

    Messages:
    271
    got another order coming, can't wait to get my vape stash a little more organized. Gonna pick up a couple of jyarz after it gets here as well. Then I'll just need the spittoon & should be good to go!
     
  6. Vape Donkey 650

    Vape Donkey 650 All vape, no smoke please.

    Messages:
    336
    Location:
    Northern California
    I got my crafty / mighty WPA a few weeks ago, and I've used it a few times, and I must say, this is the ideal tool for adapting your crafty / mighty to water tools, well done Ratchett :tup:

    [​IMG]

    [​IMG]

    I even put a 14mm basket screen on top to make sure my fine grind doesn't get inside my PPWT. It may not be needed for that, however :hmm:

    [​IMG]

    When you put a crafty into a rig like this D-020-d9 where the 18mm slot is well centered and the glass is heavy enough overall, this setup is very stable. The silicon adapter is very snug and tight twisting into the bowl of the vape, but it has just enough flexibility to make itself disconnect and fall off the vape if an excessive sideways force is applied to the WPA, which might otherwise damage the crafty / mighty's plastic shell.

    [​IMG]

    [​IMG]

    And I have plenty of dust around my vape desk as you can see. :D

    So as good as this product is, my crafty has been under-utilized recently due to my somewhat newly acquired tubo evic :love: which is a portable convection vape that performs like a desktop plug-in :ko: A great vape in its own right (swappable 18650s!) not in any urgent need of any unique Delta3DStudios products since the 18mm glass slots are pretty universal already. I'm sure existing Delta3d products can be used with the tubo if you think about, however... stir tools?

    With the tubo, made of wood and glass, I tend to be more over-protective. So I tend to use the crafty in different (more hazardous?) circumstances, when I'm being more mobile, since I don't fear dropping the crafty as much with it's plastic shell. (my crafties have survived many such drops) Adding a hydratube to the crafty changes that calculus, :hmm: but it's great to have high-performing water options when I can use the crafty in a safer space :nod:

    Great job Ratchett :clap:I'll be watching out for upcoming Delta3dStudios products as usual
     
    Last edited: Aug 3, 2017
  7. Vape Donkey 650

    Vape Donkey 650 All vape, no smoke please.

    Messages:
    336
    Location:
    Northern California
    Ok, gonna take those pics up another level, with some short videos of that crafty hooked up to the D-020-d9 :brow: This worked very nicely, better than with the smaller PPWT, which isn't surprising.

    A full crafty session lasts me about 10-12 minutes or so with a fully packed dosing capsule, so these are edited for brevity. You guys don't want to watch all the time of me not hitting the crafty, coughing and wheezing in satisfaction in between puffs anyways right? :D

    I set my crafty to boost at 380F. Of course you're free to set that higher if you really want to attempt to white-wall some glass, at the expense of some delicate flavor :shrug:







    This was alot of fun for 'science' :science: but I still think I like the tubo evic better, through glass at least. Crafty is better as a dry vape for me. The airflow on the crafty is more than sufficient, great temp control and flavor for a conduction vape, but i think that unrestricted, wide-open, pure convection air just has me :luv: It feels like a qualitatively better vapor, if slightly; even if I get that hot-air throat convection feeling when I over-tubo myself, or if try too hard to get the last few hot-air-vape puffs from a bowl before it's spent :doh:
     
  8. JCharles

    JCharles ACMPR registered 26/07/2017

    Messages:
    153
    Location:
    Toronto, Canada
    @Ratchett are there any acceories available that would help me run the new Vivant DAbOX through water. It needs to stay upright due to the coils.

    I can order a milianna mouthpiece and that can act as a male connection to the vape - but not sure what to do next, and would prefer a standalone piece(s) designed for the DAbOX

    I love my Pax3 water pipe adapter and travel caps from Delta3DStudios - just hope there might be something in the works for the DAbOX
     
  9. Ratchett

    Ratchett Vape Accessories Delta3DStudios.com Accessory Maker

    Messages:
    3,987
    Right now the best options I have would be either my Silicone Reducer or Large Nu-Song WPA adapter

    Although both options would still require you to keep the vaporizer upright and use a hydratube of some sort to keep things upright.

    An alternative option would be to consider a flexible Silicone hose tubing material (I stock 3/8th inch tubing on my store) and fit the one end of the tube over the mouthpiece of the vape. Get a standard glass 18mm to whip adapter for the other end and you can pair it with any glass on the market you want
     
  10. JCharles

    JCharles ACMPR registered 26/07/2017

    Messages:
    153
    Location:
    Toronto, Canada
    0
    Thank you for the advice - and the awesome products!!
     
  11. sunnyx12x21x

    sunnyx12x21x New Member

    Messages:
    36
    Hey anybody using Mighty/Crafrty/alternatev v3 CU and also those twisty glass blunts
    Can i use them both ? as a single attachment ,, like blubber ?
    Does the mouth piece from cooling unit is able to fix in to where u suppose to lit up
     
  12. Ratchett

    Ratchett Vape Accessories Delta3DStudios.com Accessory Maker

    Messages:
    3,987
    My rubber adapters are a bit pliable, shoot me the diameter of the twisty glass diameter and I'll tell you if I think it will fit
     
    SSVUN~YAH and Vapor_Eyes like this.
  13. sunnyx12x21x

    sunnyx12x21x New Member

    Messages:
    36
    i think i should have mention my situation with u ,

    using Vivant alternate, was with original v2 cu/mu. it got cracks and stat creating a tesion while opening and closing plus it started collecting resin like has all under it,,

    so i bought ur v3 wpa for migty/crafty.. since i lack water gear or interest. SO am using wpa as mouth peice.
    in that vapor is little hot.

    Now i was thinking who using it,if also using twisty blunt can they use it together ..

    i dont know its diameter as they dont mention it , i figure if glass blunt's mouth is something like 14mm or 18mm female something , then i might be just able to cool down its vape..with the advertised technology
     
    SSVUN~YAH likes this.
  14. Ratchett

    Ratchett Vape Accessories Delta3DStudios.com Accessory Maker

    Messages:
    3,987
    Ah, I see what you're trying to do now. Unfortunately the Twisty Blunt design is designed for smoking, it doesn't actually have a 14mm or 18mm tapered glass fitting on it. That's not to say my adapter won't work - it still might.

    Although in reality if you're looking to cool down your hit, you should consider something like a Pinnacle Watertool

    Or if you want a dry hit, you could use a Vapor Tamer like this one - https://7thfloorvapes.com/index.php...ev8-glass/vapor-tamers/fatty-vapor-tamer.html and then add a mouthpiece to the other end


    Although I still personally feel water filtration is better than frozen glycerin because cold glass encourages the vapor to condense and stick to the glass making it a weaker hit as opposed to simply filtering through room temperature water.

    Alternatively, if you want to go a cheap route. You can go down to your local hardware store, and pick up some silicone or vinyl tubing and connect that to my v3 Adapter and turn your Vivant Alternate into a whip style vaporizer for under $4 hahaha
     
  15. sunnyx12x21x

    sunnyx12x21x New Member

    Messages:
    36
    StormyPinkness likes this.
  16. squidmark

    squidmark Active Member

    Messages:
    21
    @Ratchett

    Two product requests for you:

    1. A case for @Pipes Skeletor induction heater

    2. A button cover for the Zion like the one you sell for the Milaana

    BTW I'm LOVING my vape spitoon!
     
  17. Ratchett

    Ratchett Vape Accessories Delta3DStudios.com Accessory Maker

    Messages:
    3,987
    :rockon:

    Love to hear the suggestions, I'll keep them in mind! I'm currently in the process of shopping for a new home for the studio, hopefully over the next few months I'll have some very exciting news introducing a larger workshop with some new equipment and tools to expand the capabilities of my studio.

    Happy to hear you're enjoying my Spittoon! I spent over a year playing with different prototypes before I ever published the first edition for sale to the public. I certainly use my Vape Spittoon daily with every vaporizer I use (even as a simple "ABV catch-all" jar) - it's literally become habitual to use my spittoon :lol:

    If you like your Vape Spittoon, just wait until you see what I'm building for the stoner "on-the go" :brow:
     
    Last edited: Oct 5, 2017
  18. squidmark

    squidmark Active Member

    Messages:
    21
    [​IMG]

    Now you've got my attention! Can't wait to see what you've got cooking.
     
  19. Gigsabits53

    Gigsabits53 Well-Known Member

    Messages:
    265
    Great news!! Can't wait to see what you create. :)
     
  20. Gobrian

    Gobrian Well-Known Member

    Messages:
    114
    So I was super excited for my loading tray but I think I got a bad one! :(
    The capsules barely fit in the holes for them. It was an extremely tight fit and when I used the pusher tray try to try to push them out the capsules wouldn't come out!
    The pusher does not seem to be long enough to push them all the way out, and since the fit is so tight, I can't pull them out with my hands!
    I had to use a screw to push them out, but since the fit was so tight, they were warped by the screw and I had to get rid of them :(.

    Any chance I could get a new one that actually works?
    Much appreciated! This product is a great idea and would love to have a working one.

    [​IMG]
     
  21. Ratchett

    Ratchett Vape Accessories Delta3DStudios.com Accessory Maker

    Messages:
    3,987

    Oh no, that shouldn't happen - I'm betting it's a mis-calibration due to the tight tolerances on the design. Please PM me your order number and I'll take care of you! That shouldn't happen, I promise
     
    Last edited: Oct 27, 2017
  22. Gobrian

    Gobrian Well-Known Member

    Messages:
    114
    Thank you for arranging a new loading tray to be sent out to me!
    That right there is good customer service, ladies and gents!
     
  23. Ratchett

    Ratchett Vape Accessories Delta3DStudios.com Accessory Maker

    Messages:
    3,987
    Pardon the silence as of lately folks, been quite busy behind the scenes working on expanding the studio.

    Some of you may have already noticed I've been expanding my list of authorized retailers. I've been quite busy fulfilling those bulk orders recently, but I'm still finding time to design new products.

    After many requests and a few weeks of hard work, I'm pleased to introduce my new Davinci iQ Heatshield sleeve

    [​IMG]


    It's going to be a crazy few months as I work on migrating from my studio into a larger workshop so I can add more machinery to the studio. Please accept my apologies in advance if your order takes slightly longer to ship or if I don't promptly respond to an email.
     
  24. metaknight

    metaknight Well-Known Member

    I'm very excited to see what you've got coming for the stoner on-the-go, if it's anything related to the vape spittoon. I just received mine, I am in love with the functionality of this thing.

    I hooked mine up to a little bit bigger of a jar so that it can hold more ABV :tup:
     
    SSVUN~YAH and Gigsabits53 like this.
  25. Gigsabits53

    Gigsabits53 Well-Known Member

    Messages:
    265
    I did the same thing!! I'm not sure how I lived without it to be honest. Awesome accessory!
     
    SSVUN~YAH, Ratchett and metaknight like this.

Support FC, visit our trusted friends and sponsors