1. What does SSTB mean? See our glossary of acronyms.

Cheap, high-quality bubbler??

Discussion in 'Glass' started by Bleezy, Mar 3, 2012.

  1. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    hello everyone that just got their new bubbler's. do any of you dab?? do you have a male to male adapter on hand to put in the new bubbler and can tell me where the nail and dome would be in relation to the mouth piece?? i would appreciate it alot!!! thanks in advance
  2. Malloy1

    Malloy1 Member

    Messages:
    78
    I will Friday man so if no one does by them I'll show u
  3. Live-N-Learn

    Live-N-Learn Higher, Higher, Baby...

    Pardon my French but I'm pretty fucking stoked, I feel I should of just ordered sooner lol. I feel like I'm about to unlock an achievement once I get this thing lol

    Does anyone know what adapter I will need to connect with a Pax? If not I will have to go to the Pax section and ask. I never owned a bubbler, better yet even a bong ever so I know to get some tubing, and I need an adapter for this whole concoction to work. Please correct me If I am wrong.

    [​IMG]
  4. Dreamerr

    Dreamerr Always in a state of confusion and silliness♀

    Messages:
    5,353
    It looks to me like the ssv tubing which I believe to be a half inch ID will work. I am not sure how to get it over the pax mouth piece since that is more like an inch but I know some have. Jam for sure has done it but not sure what tubing she used. I also saw a post that had the mouth piece removed and hooked it up that way. I think they just left the silver part IIRC.

    I used the SSV tubing and left the solo on the bed and it worked well. I might just cut a small piece and make that my reducer. I did like to leave the vape on the bed though and just pull the tube. It made life simple but the air path was long.

    Next up to try is Ed's stem cause I remember reading it should fit we will see.
  5. nopartofme

    nopartofme Well-Known Member

    Messages:
    894
    Location:
    The Golden Age of Wireless
    [​IMG]

    [​IMG]
  6. BigDaddyVapor

    BigDaddyVapor @BigDogJunction

    Messages:
    3,001
    Mine has 3 slits. Sorry I didn't get those measurements. Ended up, having to run out the door and run 3 rush errands. Still not home yet. Fiending for meds. Should have brought my Box with me.
  7. Dreamerr

    Dreamerr Always in a state of confusion and silliness♀

    Messages:
    5,353
    Malloy mine has six so I guess that is what the new ones have.

    Ed's stem didn't work left air holes.
  8. BigDaddyVapor

    BigDaddyVapor @BigDogJunction

    Messages:
    3,001
    My Infamous.

    Height: 8 3/4"
    Height of can: 3 3/4"
    Height to top of joint: 5 1/4"

    So, as long as your adapter isn't higher than 3 1/2", you should be good.

    Btw, the 3 slit design, is the same as VB's.

    This is how a good keck clip, should fit and hold.

    [​IMG]
    [​IMG]
    JSteez4205 and Bob Loblaw like this.
  9. nopartofme

    nopartofme Well-Known Member

    Messages:
    894
    Location:
    The Golden Age of Wireless
    The new model is an inch smaller, looks like 4.25" from the base to the top of the joint here.
  10. Malloy1

    Malloy1 Member

    Messages:
    78
    Yeah they gave me 2 18mm clips kinda gay but w.e
  11. Dreamerr

    Dreamerr Always in a state of confusion and silliness♀

    Messages:
    5,353
    I got none but like BDV said it doesn't need it. Mine measures around 4.5" total and can about 3.25. It is 7" to the top of the mouth piece. So they are way smaller and have more slits but since this is my one and only I will say I am satisfied. I wanted small and I got small and it is smooth.
    nopartofme likes this.
  12. Malloy1

    Malloy1 Member

    Messages:
    78
    Yeah man Deff no complaints on this end solid piece for 40$ pretty happy about the extra slits
    nopartofme likes this.
  13. that herb guy

    that herb guy Well-Known Member

    Messages:
    311
    So, picked this up out on whim this Holiday with a J-hook. For the X-mas deal they had running, not bad for the $ at all. Advertised as 16 slit showerhead, mine came with 12 slits. Can is nice size, and it's pretty easy to get deceptively large rips. Way less drag than the last piece I was using. One of these days I'll splurge on some NICE glass, just not quite yet. I do wonder what it would be like with the extra slits, but it's a nice little piece for cheap.

    http://www.grasscity.com/us_en/blac...rc-precooler-recessed-joint.html#.UO4yq2_AeUo
  14. BigDaddyVapor

    BigDaddyVapor @BigDogJunction

    Messages:
    3,001
  15. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    my male to male adapter is just a hair under 3 1/2" so i am thinking this may be what i need to dab comfortably now.

    Thanks BDV

    i would still like to see it with the adapter in it IF and only IF there are any dabbers around with the same equipment.
  16. Dreamerr

    Dreamerr Always in a state of confusion and silliness♀

    Messages:
    5,353
    Menz look at my measurements the size has changed.
  17. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    what do you think the measurement is from the top of the can where the bowl would go in (or in your case the tube) to whaere the top of the mouth piece would be if it was directly above the can??
  18. Dreamerr

    Dreamerr Always in a state of confusion and silliness♀

    Messages:
    5,353
    Ok trying understand so I can measure for u...from the opening where you would initial put a bowl to the top of the mouth piece is about 2". The ground part of the bowl is another inch. I hope this helps. If you need something else just ask. You know it is hard to measure cause of the turn of the mouth piece. To the elbow of the mouth piece it appears to be about 1 1/2".

    Question...is there any reason why I can't put this bubbler, solo stems and maybe even the smooth flow in the dishwasher?
  19. kingofnull

    kingofnull ace

    Messages:
    2,366
    Location:
    Canada
    Malloy1 you mean the keck clips? Did you try the metal ones - I find them much tighter than the plastic.
  20. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY

    hmmmmmm... may need to re-think this a bit. but i am way too tired and i am going to bed. will revisit this with a fresh brain tomorrow.

    goodnight all
    FrogBoy138 likes this.
  21. SD_haze

    SD_haze MMJ Vaporist

    Messages:
    3,155
    Location:
    San Diego, CA
    I should get my bubbler tomorrow or the next day, and I have a 14/18 male=>male adapter to demo, if you're still curious.

    From looking at the pics tho, seems like it would work well.
  22. Dreamerr

    Dreamerr Always in a state of confusion and silliness♀

    Messages:
    5,353
    Oh goody haze that means I don't have to take a pic and put lines to show the size of each spot...thanks saves me work.
  23. JSteez4205

    JSteez4205 aka Gordon NugzB

    Messages:
    281
    told you I'd hook you up when I got home, but I did almost forget!! Haha. Took a dab to remind me. Hope this image helps. I put my dome on it and it pairs nicely as I envisioned with the nail at comfortable eye-level.
    [​IMG]

    And up close with dome on, hope this shows what you wanted to know Mmenzie!
    [​IMG]
    FrogBoy138 likes this.
  24. PAZ

    PAZ Well-Known Member

    Messages:
    271
    Dreamerr, how much of a difference did this make for you with your inhalater? Figured it would be good to ask you since you haven't owned any prior glass.
  25. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    Thanks Jsteez4205 and sorry to you and everyone for my obvious impatience.... its because of the massive impatience that i can never do pre-orders ever again!!! lol your pics help. your dome seems to go higher than the mouth piece and that didn't look like it was a good fit for me, but then i also noticed that your dome is tall and skinny and i have a fatter, rounder one (like the one in your first pic hiding in the background) that i think is smaller than yours. so this may work after all.

    thanks again

Support FC, visit our trusted friends and sponsors