• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Search results

  1. D

    Discontinued Pax Vaporizer by Ploom

    have you seen the video i posted a bunch of pages back? basically it just shows what you should expect as far as cloud size on medium/high temperature, using some very good herb i might add. here's the video (skip to around the 3 minute mark if you don't want to watch the entire thing, that's...
  2. D

    Discontinued Pax Vaporizer by Ploom

    most i've left it on for is overnight. it really makes no difference though, no charging happens after the light turns green as far as i know. not sure if the green light is being powered by the battery or charger, however i know if i pull my pax off the charger as soon as it goes green and put...
  3. D

    Discontinued Pax Vaporizer by Ploom

    once it's green on the charger the battery has reached its maximum capacity (4.2 volts). i have tested this with a multimeter. therefore, there is no reason to leave the device on charge after it shows as green, this only causes the battery to discharge slightly in my experience, probably due...
  4. D

    Discontinued Pax Vaporizer by Ploom

    nah, with the new mouthpiece is has absolutely nothing to do with clean. i haven't cleaned either of my pax's since i got the new mouthpieces and both are still working 100% perfectly, no temperature light issues, no sticking mouthpieces issues, no issues at all. i should also mention i received...
  5. D

    Discontinued Pax Vaporizer by Ploom

    i'm uploading a video now demonstrating exactly how i pack it in order to get the best results. pretty big file so give me a little while.
  6. D

    Discontinued Pax Vaporizer by Ploom

    you're soldering wires that are already attached to the pcb (printed circuit board) to the tabs that batteries+ is going to spot weld to your battery. all you need to do is desolder the wires from the tabs on the stock battery, and resolder the wires to the tabs on your new battery. hopefully...
  7. D

    Discontinued Pax Vaporizer by Ploom

    no need to even mess with the connection to the pcb, i simply desoldered the stock battery from the wires already in place and soldered in my new one, quite simple :)
  8. D

    Discontinued Pax Vaporizer by Ploom

    even if you discharge pax to "dead" i.e. it flashes 3 red lights upon turning it on, it is only discharged to 3.64 volts. li-ion batterys are capable of safely being discharged to much less than 3.64 volts, so even discharging the pax entirely is really only discharging the battery about ~50%.
  9. D

    Discontinued Pax Vaporizer by Ploom

    that doesn't even make sense... the iso is 100% guaranteed not the sole cause of the temperature button being "damaged". the fact that iso gets in around the temp button at all is a minor issue as it will just evaporate rather quickly, the problem occurs when resin saturated iso gets into the...
  10. D

    Discontinued Pax Vaporizer by Ploom

    little bit irritating seeing people talking about a "pax 2.0", what makes anyone think that's ever going to happen? the first version is just fine, the temp button issue is user error, you are probably using WAY too much iso. in my opinion, the only thing that needs updating is the cleaning...
  11. D

    Discontinued Pax Vaporizer by Ploom

    i have 2 pax's, so i requested 2 new mouthpieces, and heres what i noticed... the first mouthpiece i received i tried on my onyx pax, when i did this it was still doing the temperature color thing quite often. once i got my second mouthpiece (they sent them seperately), i tried that one on my...
  12. D

    Discontinued Pax Vaporizer by Ploom

    took 2 days from the time they shipped it to get to me, i'm in the usa though.
  13. D

    Discontinued Pax Vaporizer by Ploom

    nah it has always been lit :)
  14. D

    Discontinued Pax Vaporizer by Ploom

    temp button is exactly the same...
  15. D

    Discontinued Pax Vaporizer by Ploom

    sounds like you've found the high temperature setting, i would recommend lowering it to medium as you'll find you get much better results. also, if you pack it full you're going to have to stir it to get the most out of it.
  16. D

    Discontinued Pax Vaporizer by Ploom

    figured out the purpose of the o-rings, basically they stop the device from sliding back and fourth very slightly when you open/close the mouthpiece. i noticed my screw getting loose often in my pax without the o-rings, i'm probably going to put some electrical tape in place of the o-ring to...
  17. D

    Discontinued Pax Vaporizer by Ploom

    you must be an extremely impatient guy if you think its a "nuisance" to spend 30 seconds loading the oven, just saying. especially knowing you're a minimalist toker, how long can it take to pack .2 into the pax? its only packing ~.5+ that takes some effort, and based on your prior posts i know...
  18. D

    Discontinued Pax Vaporizer by Ploom

    first impression, i do prefer the motion as it was originally, however i just got it; who knows if it will become smoother as the mouthpiece gets more resinated. either way, as long as it's functional i'll be happy.
  19. D

    Discontinued Pax Vaporizer by Ploom

    just got the new mouthpiece (without any hassle i might add, just gave them my name and address), definitely more of a mechanical feeling to the on/off click. everything seems to work fine now (no sticking yet), however only time will tell.
Top Bottom