DDave Mod for SSV/ DBV/ LSV

loug

Well-Known Member
Has the longer reducer (concentration chamber) been made available yet? Can't see anything about it on ebay or FC since it was mentioned a while back. If available, what is the cost?

TIA

Bump...
 
loug,
  • Like
Reactions: DDave

NorVape

Vape Rictim
What is the "longer reducer (concentration chamber)"? Is there an update I've missed out on? :haw:
 
NorVape,
  • Like
Reactions: DDave

DDave

Vape Wizard
Accessory Maker
What is the "longer reducer (concentration chamber)"? Is there an update I've missed out on? :haw:
longer reducer with 14mm screen installed in it. When 14mm wand is mated to the reducer with its own 14mm screen installed, the two combined screens create the "Chamber"...

xqIdzP9.jpg


FOdVU5Q.jpg
 

DDave

Vape Wizard
Accessory Maker
Looks cool!

What's the perks?
:rockon:

No chance of 'blowback' of herbs into heater.

Loose pack microdosing. There have been discussions on flavor, smoothness of hits.

Even smaller quantity microdosing. Don't need to put even enough product in to be able to lightly pack a basket.

Concentrates. On cotton or with herb, nice blast of vapor.
 

Raskin666

Doom Walrus
This reducer coupled with a metered 14mm-18mm M2M would make a great LSV Micro mod.

And a screen cap for the 18mm M2M for no spill LSV use :)

@DDave
Some feedback on the LSV M2M:
While I find the little handle to be useful, it is so close to the ground glass segments that it prevents a full seal with certain glass. For example, recessed female joint like the D020-D or a hydrotube. Perhaps a little more space between the middle and the ends?
 

DDave

Vape Wizard
Accessory Maker
This reducer coupled with a metered 14mm-18mm M2M would make a great LSV Micro mod.

And a screen cap for the 18mm M2M for no spill LSV use :)

I've been thinking on something like this for the LSV. This or something similar is definitely planned.

While I find the little handle to be useful, it is so close to the ground glass segments that it prevents a full seal with certain glass. For example, recessed female joint like the D020-D or a hydrotube. Perhaps a little more space between the middle and the ends?
I've heard this from others as well. I have a few things to discuss with "the glass dude" and will bring this up as well... Would "handleless" be out of the question? Maybe I'd include the hot adapter clamp from the EQ kit along with this, removing the need for the glass handle?

Thinking on this too..

@Raskin666 , Thanks for the feedback and suggestions! :rockon:
 

Raskin666

Doom Walrus
I've been thinking on something like this for the LSV. This or something similar is definitely planned.


I've heard this from others as well. I have a few things to discuss with "the glass dude" and will bring this up as well... Would "handleless" be out of the question? Maybe I'd include the hot adapter clamp from the EQ kit along with this, removing the need for the glass handle?

Thinking on this too..

@Raskin666 , Thanks for the feedback and suggestions! :rockon:
I think "handle-less" would be fine (for me atleast)

Keep up the good work Ddave!
 
Raskin666,
  • Like
Reactions: DDave

Roomi C

New Member
Hello DDave, How's it going bro ? I am new here so excuse me if I'm breaking protocol or anything.. :S

I ordered my complete/micro kit yesterday and I was just wondering if it would be shipped today ?
Thanks :) (I'm in Toronto btw, not sure if it's relevant)

PS : If I seem impatient it's only because I've read through a million positive reviews by now and I just. Can't. Wait. Oh and also because I'm broke as shit and want to start conserving bud ASAP :p
 

eideal852

Well-Known Member
Hello DDave, How's it going bro ? I am new here so excuse me if I'm breaking protocol or anything.. :S

I ordered my complete/micro kit yesterday and I was just wondering if it would be shipped today ?
Thanks :) (I'm in Toronto btw, not sure if it's relevant)

PS : If I seem impatient it's only because I've read through a million positive reviews by now and I just. Can't. Wait. Oh and also because I'm broke as shit and want to start conserving bud ASAP :p
Ooh boy. I need to place an order as well, my micro adapter is cracked, and I am bombing through so much more herb. Too high. Too expensive. Too much. Help him ddave, you're his only hope.
 

DDave

Vape Wizard
Accessory Maker
Hello Roomi C,

Thanks for reaching out. With apologies, I've flown out of town on business and am unable to ship as quickly as I usually do. was last minute and didn't have time to update listings.

I will get you an update once I have a solid return date. Is a project, so I return when it's completed. I expect no longer than a week.

If you're uncomfortable with my holding your order, I can cancel it and set a reminder to reach out to you to let you know once I'm actively able to ship.

Apologies for the delay. Was unavoidable.

Thanks,
DDave

EDIT: @ eideal852, why do I feel like some lady with Cinnabons over her ears is asking me, a little robot, to deliver a message to an old guy with a really cool sword?
 

Roomi C

New Member
@DDave It's ok bro just please don't forget to ship it once you're back lol :S
Btw what's the best way to contact you, PM or on this thread ?

In the meantime, I had a question for the esteemed FC DBV community. What's the 'most' efficient way to use this vape ? I've had it for almost a month and even though I loved how powerful this baby is, I was frustrated by the fact that even though I had tried all different draw-speed/load-size/temp. combinations possible, no matter what I do I would only get two or max 3 monstrous hits but after that it was just a hit-or-miss kind of situation which got pretty annoying after a while.

That being said, only today I found out what I was doing wrong, thanks to some light reading I was doing on here earlier. I was grinding my herb too fine (old habit, coming from MFLB) which would clog the screen and fuck the airflow no matter how often I changed screens. Now i break the weed with my hands and fill the wand 1/4, lightly tamped. I can get easily get 10-12 good-sized hits now.

My question is, do you think this amount of hits from that load is normal or is there still room for improvement ? (I need all the help I can get until my DDave kit arrives)

Hello Roomi C,

Thanks for reaching out. With apologies, I've flown out of town on business and am unable to ship as quickly as I usually do. was last minute and didn't have time to update listings.

I will get you an update once I have a solid return date. Is a project, so I return when it's completed. I expect no longer than a week.

If you're uncomfortable with my holding your order, I can cancel it and set a reminder to reach out to you to let you know once I'm actively able to ship.

Apologies for the delay. Was unavoidable.

Thanks,
DDave

EDIT: @ eideal852, why do I feel like some lady with Cinnabons over her ears is asking me, a little robot, to deliver a message to an old guy with a really cool sword?
 
Roomi C,

DDave

Vape Wizard
Accessory Maker
@DDave It's ok bro just please don't forget to ship it once you're back lol :S
Btw what's the best way to contact you, PM or on this thread
@Roomi C Thanks, never forget. No order gets left behind. :rockon:

You can contact me by whatever means works best.

If something you think everyone could benefit by or you want others to chime in on... the thread is good.

If you wish to PM, cool too.

Or if you need to get a conversation going on, email...

I try to answer all communications quickly... at least as quick as I can. :tup:
 

DrNick420

Well-Known Member
Is there a new version of LSV DDave mod in the works? Was gonna buy one but it sounds like a V2 is in the works?
 
DrNick420,
  • Like
Reactions: DDave

VapeForTheTaste

Well-Known Member
I've had the mod for a few hazy days now... Been using just the 14mm wand. I'm not sure I can say anything that hasn't already been articulated better. It's as close to dabbing herbs as you'll ever get. Very efficient.
 
VapeForTheTaste,
  • Like
Reactions: DDave

DDave

Vape Wizard
Accessory Maker
I've had the mod for a few hazy days now... Been using just the 14mm wand. I'm not sure I can say anything that hasn't already been articulated better. It's as close to dabbing herbs as you'll ever get. Very efficient.
Feedback always appreciated! Good, bad or suggestions all help to improve the kits!

Glad to hear you're enjoying the mod! :rockon:
 

VapeForTheTaste

Well-Known Member
The only minor annoyance I'm finding is that the basket comes off in the adapter. It doesn't spill or anything, so that's fine. I know it's solved with the "concentration chamber" configuration but it seems like that setup introduces a little extra air into the equation. I could be mistaken.

I also personally prefer the vinyl clear tubing like 7th floor provides. Mostly because it's clear, but also because everything sticks to silicone. I know the safety of vinyl is ever so slightly questionable though...
 

VapeForTheTaste

Well-Known Member
Sorry to double post but I realized I never said... I am VERY happy with this kit. I was really considering a new desktop vape, was being the key word. Here on the lower left is a small load, enough to cover the bottom of the screen, and upper right is a normal load; maybe 2/3 of a screen packed pretty well. Kind of hard to tell the difference because it's such a small amount. I usually vape them a little bit darker for the sake of conservation, which is made much easier with the additional control the kit gives.
CpZKj4H.jpg
 

Agent_Age

Well-Known Member
longer reducer with 14mm screen installed in it. When 14mm wand is mated to the reducer with its own 14mm screen installed, the two combined screens create the "Chamber"...

xqIdzP9.jpg


FOdVU5Q.jpg

Hi mate, just recieved the mod in the mail, Very impressed so far. I am having trouble setting the 14mm screen in the reducer. They all just fall through. Is there something im doing wrong
 
Agent_Age,
  • Like
Reactions: DDave
Top Bottom