Cheap High Quality Bubbler

YaFreekin Right

YaFreekin Right

Well-Known Member
StickyBricks said:
@Stu i had drawn up two intakes showing how theirs are, and how it should be, but I've yet to see any changes to these joints being recessed. I believe @gaseous_clay has done the same without results also. I'm starting to think it's a limitation in the ground glass parts they are using.
Click to expand...

Thanks for doing that. I think one of the only ways to correct this issue is as a group to file for a partial refund. If they are loosing money due to these 'design flaws' there are much more likely to take some action. If they keep selling the way they are they have no incentive to make changes.
 
ataxian

ataxian

PALE BLUE DOT
StickyBricks said:
@Stu i had drawn up two intakes showing how theirs are, and how it should be, but I've yet to see any changes to these joints being recessed. I believe @gaseous_clay has done the same without results also. I'm starting to think it's a limitation in the ground glass parts they are using.
Click to expand...
Have you ever heard of PLUMBER TAPE? (TEFLON TAPE)

I have all of the HYDROTUBES from dhagate and they all don't fit. (LOOSE JOINT'S)

SHIM them their cheap!

UFO is a nice BASE. (FYI)
 
ataxian

ataxian

PALE BLUE DOT
Stu said:
Yup.
https://www.amazon.com/Daixers-Extr...sr=8-1-spons&keywords=silicone+hot+pads&psc=1

I have several of them and like to keep my glass on them at all times. I love the nice soft "landing" each time I set down a piece. :nod:

:peace:
Click to expand...
I just bought a set.
Thanks!
I wanted to get messed up!
2MD1z90.jpg

At least it was cheap and works very well 14mm.
SHATTER to go with a fruit salad?
 
IAmKrazy2

IAmKrazy2

Darth Vapor
Almost everything i have is 18mm female. The GH works best with 14mm. Any suggestions for rad 14mm female pieces in the small to medium category you all would recommend via dhgate? I
 
ataxian

ataxian

PALE BLUE DOT
IAmKrazy2 said:
Almost everything i have is 18mm female. The GH works best with 14mm. Any suggestions for rad 14mm female pieces in the small to medium category you all would recommend via dhgate? I
Click to expand...
I have GAS big time!
Water-pipes, ASH COLLECTORS, SHERLOCK'S (JHOOK'S), BUBBLER'S, GonG's, Mouth-pieces,
HYDRO-TUBES, Adapter's like crazy!

One adapter I would not be without: 18mm to 14mm reducer bushing. (I have 5)

Part's or fitting's like a plumber.

Think like a PIPE-FITTER.

GIANT TINKER TOY'S or LEGO'S


dhgate I buy 5 of everything I need because I break glass like a GREEK wedding!

I'm not even GREEK?

sunshine store on dhgate has stuff! (1st place to look)

I have both 14mm and 18mm to reduce my need for parts.
However part's I always need!
 
Last edited:
IAmKrazy2

IAmKrazy2

Darth Vapor
ataxian said:
I have GAS big time!
Water-pipes, ASH COLLECTORS, SHERLOCK'S (JHOOK'S), BUBBLER'S, GonG's, Mouth-pieces,
HYDRO-TUBES, Adapter's like crazy!

One adapter I would not be without: 18mm to 14mm reducer bushing. (I have 5)

Part's or fitting's like a plumber.

Think like a PIPE-FITTER.

GIANT TINKER TOY'S or LEGO'S


dhgate I buy 5 of everything I need because I break glass like a GREEK wedding!

I'm not even GREEK?

sunshine store on dhgate has stuff! (1st place to look)

I have both 14mm and 18mm to reduce my need for parts.
However part's I always need!
Click to expand...

I do have a couple of reducers, and a 18mm to 14mm slide or two also. I could probably use another if they are cheap on dhgate. And a good slide for my Pur2Go.

But i am also looking for an excuse to burn 20 bucks. I will check out sunshine for sure. Thanks for advice.
 
CalyxSmokr

CalyxSmokr

Well-Known Member
Dramma Lamma

Dramma Lamma

Looks like a job for!
mrbonsai420

mrbonsai420

Accessory Maker
Accessory Maker
IAmKrazy2 said:
Almost everything i have is 18mm female. The GH works best with 14mm. Any suggestions for rad 14mm female pieces in the small to medium category you all would recommend via dhgate? I
Click to expand...

Well, This little guy will be your best friend of course ;) 18mm male to 14mm femalea NOT just the flush adapter, this will work in your 18mm recessed dewar joint

http://www.dhgate.com/product/glass...male/374641742.html#s1-19-1b;searl|3482435938

This is a pretty nice smal bong. Built like a tank.

http://www.dhgate.com/product/2015-...nches/247499767.html#s1-0-1b;searl|4128725168

Several new ones coming out with a 14mm female option, a lot of the new CCG stuff is 14mm like this. Almost reminds me of an Evol Empire piece which I really really want!!

http://www.dhgate.com/store/product/7-5-quot-glass-mini-fab-egg-barrel-figure/386458530.html
 
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
bobo305 said:
jesus, enough with the cheap, shit bubblers. thread says hi quality. NOTHING from dhgate is quality.
Click to expand...
Funny thing is, you can get quality glass from dhgate. I have and plenty of other satisfied members. Is it as nice as my rigs that cost 10x-20x? No, but if I break them, I think you get the gist. My UFO and Cheese Ball rigs are fantastic, not to mention stunning art, thanks to @mvapes wonderful work. The OP had your opinion and look how his thread turned out, bwahaha! :2c::peace:

qsMFzM2.jpg

F4UvJeH.jpg

FPnFXfl.jpg
 
max

max

Out to lunch
bobo305 said:
jesus, enough with the cheap, shit bubblers. thread says hi quality. NOTHING from dhgate is quality.
Click to expand...
Nothing? Since I've bought name brand vapes AND a bubbler from the site, I'd have to disagree. It's a big site and to say everything you can buy there is low quality amounts to a sweeping generalization, and those, by definition, are too wide ranging to be true. Then there's also the definition of 'quality' to be considered. It's more of an opinion than an absolute.

At any rate, we'll note your opinion on dhgate products, and you can just ignore stuff from the site in the future.
 
Maitri

Maitri

Deadhead, Low-Temp Dabber, Mahayana Buddhist
SSVUN~YAH said:
Funny thing is, you can get quality glass from dhgate. I have and plenty of other satisfied members. Is it as nice as my rigs that cost 10x-20x? No, but if I break them, I think you get the gist. My UFO and Cheese Ball rigs are fantastic, not to mention stunning art, thanks to @mvapes wonderful work. The OP had your opinion and look how his thread turned out, bwahaha! :2c::peace:

qsMFzM2.jpg

F4UvJeH.jpg

FPnFXfl.jpg
Click to expand...

Wow, awesome! So-Many-Questions! :)

Who produced the FTK, what do you use it for and how do you like it?

Who etched those awesome dancing bears on the glass?

And is that a Grateful Dead dab pad? If so, from where? If not, what is it?

Thank You! :) <3
 
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Maitri said:
Wow, awesome! So-Many-Questions! :)

Who produced the FTK, what do you use it for and how do you like it?

Who etched those awesome dancing bears on the glass?

And is that a Grateful Dead dab pad? If so, from where? If not, what is it?

Thank You! :) <3
Click to expand...
Hi @Maitri it's a fab ball rig, lacks the funnel of the ftk, I got it from Kathy0577. PM me if you need a direct link. I use it for both dabs and flowers, with and w/o h2o like all my rigs.

@mvapes did the scratching, amazing work, check his thread!
http://fuckcombustion.com/threads/scratched-glass-works.19485/

The Grateful Dead pad is a mouse pad I bought at the Rock and Roll Hall of Fame. They had a wonderful display of Jerry's guitars, good times. Thanks for the kind words brother! :peace:
 
Maitri

Maitri

Deadhead, Low-Temp Dabber, Mahayana Buddhist
SSVUN~YAH said:
Hi @Maitri it's a fab ball rig, lacks the funnel of the ftk, I got it from Kathy0577. PM me if you need a direct link. I use it for both dabs and flowers, with and w/o h2o like all my rigs.
Click to expand...

Hey @SSVUN~YAH! :)

Oh, you're right! There is no torus effect! Oops! :) How much do you like 'n recommend it for flower 'n for concentrates? How smooth is it? My only Chinese glass (CCG Wake and Bake) is well made but is way more chug-a-chug than I like.

SSVUN~YAH said:
Hi [USER=4644]@mvapes did the scratching, amazing work, check his thread!
http://fuckcombustion.com/threads/scratched-glass-works.19485/[/USER]
Click to expand...


Awesome! I am familiar with (and love) his work! :)

[QUOTE="SSVUN~YAH, post: 996443, member: 12478"]Hi [USER=29175]The Grateful Dead pad is a mouse pad I bought at the Rock and Roll Hall of Fame.They had a wonderful display of Jerry's guitars, good times. [/QUOTE]

Wow, awesome. I would love to get there someday!

[QUOTE="SSVUN~YAH, post: 996443, member: 12478"]Hi [USER=29175]Thanks for the kind words brother! :peace:[/QUOTE]

You are welcome and thank you for your prompt and helpful reply! :)[/user][/user]
 
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Maitri said:
Hey @SSVUN~YAH! :)

Oh, you're right! There is no torus effect! Oops! :) How much do you like 'n recommend it for flower 'n for concentrates? How smooth is it? My only Chinese glass (CCG Wake and Bake) is well made but is way more chug-a-chug than I like.



Awesome! I am familiar with (and love) his work! :)

[USER=29175]

Wow, awesome. I would love to get there someday!

[USER=29175]

You are welcome and thank you for your prompt and helpful reply! :)[/user][/user]
Click to expand...
I definitely recommend it! I believe the slits on the bottom and top of the perc, help reduce the chug. You could always sell your wake & bake and fund another rig. If you're thinking of solely concentrates, you might enjoy something smaller like the CCG d cycler, it's very smooth or the diffusion pump, though it has some chug but flavor city too! Best of luck finding your diamond in the rough, keep us updated too!
 
ataxian

ataxian

PALE BLUE DOT
FlyingLow said:
Concentrates... Ataxia is slipping to the dark side!
Click to expand...
Lately I do CONCENTATES all day long!
So cheap and available now.

I use a lot of 14mm for SHATTER.

My COLA consumption I do every night!

GDP and DRIZZLE OG is all I have besides lot's of SHATTER.

DARTH VADER MODE.

Can't wait for my new can from dhgate. (designed by @Cannabis Connoisseur)

Tomorrow a bag of SATIVA is in order!

DARKSIDE = LOVE SHATTER

Shout out to @bobo305 I grew up in a JOINT culture and hated bongs for years.
My tribe still prefere ZIG-ZAGS over vaporizers. (BONG's too big of a mouth-piece)

When I broke $500 pieces like a GREEK wedding I cried like a baby. ($ is important to me.)
I won't buy watches or electronics outside the USA.
However Glass so cheap helps me explore water world.
When I drop and break a piece I laugh out loud!
My CALIFORNIAN CUSTOM WATER RIG is my best one.
In the meantime I enjoy trying stuff without effecting my $!
@mvapes does nice work!
 
Last edited:
You must log in or register to reply here.
Top Bottom