New Portable H Enail with built in glass bubbler by Green Light Vapes

tylerj55

Well-Known Member
Errlmod came in today but I feel like my g9 had better flavor. My TC is'nt working as well with this errlmod either. Quartz nail actually tasted worst than the ceramic on the errlmod as well. It always tastes kind of burnt..
 
tylerj55,
  • Like
Reactions: Hoosier

Hoosier

Well-Known Member
Errlmod came in today but I feel like my g9 had better flavor. My TC is'nt working as well with this errlmod either. Quartz nail actually tasted worst than the ceramic on the errlmod as well. It always tastes kind of burnt..

Did you clean your nail first? I made that mistake once. Never again, lol!

Regarding TC---I have pretty much given up on using with any of these devices...just seems to work better by using wattage mode around 60w. I also have started playing with low temp techs and am really starting to think about selling my full enail...just not using it anymore
 
Last edited:
Hoosier,

Danksta

Well-Known Member
How are you guys cleaning these bubblers? The one with the ErllMOD has a spashcap that pretty much prevents water from ever leaving. I can run water through it to rinse out the used water, but there is always some up in the bubbler all the time. Can kinda shake it out a bit, but otherwise I can't figure out this puzzle. It gets dirty rather quick.

Started using the ceramic today. I agree the ErrlMOD ceramic tastes iffy. Not bad, but I think the Ti tastes better. I will have to do more testing. I think the ceramic is more efficient too, so I was bummed when the taste was subpar.

I'm actually considering getting an enail still though. I like this lil' bugger, but I don't think it's going to be able to keep up with me.

I also get a bit of paranoia holding this device with glass attached so close to my face. I practice good battery care, but still I just worry one day I'll have a bad experience with my unit. I'm probably worrying too much, but it does cross my mind.

Still very happy with the unit though. No plans on giving up on it. I just don't think it can be my main device.
 
Danksta,

papapotbelly

Well-Known Member
How are you guys cleaning these bubblers? The one with the ErllMOD has a spashcap that pretty much prevents water from ever leaving. I can run water through it to rinse out the used water, but there is always some up in the bubbler all the time. Can kinda shake it out a bit, but otherwise I can't figure out this puzzle. It gets dirty rather quick.

Started using the ceramic today. I agree the ErrlMOD ceramic tastes iffy. Not bad, but I think the Ti tastes better. I will have to do more testing. I think the ceramic is more efficient too, so I was bummed when the taste was subpar.

I'm actually considering getting an enail still though. I like this lil' bugger, but I don't think it's going to be able to keep up with me.

I also get a bit of paranoia holding this device with glass attached so close to my face. I practice good battery care, but still I just worry one day I'll have a bad experience with my unit. I'm probably worrying too much, but it does cross my mind.

Still very happy with the unit though. No plans on giving up on it. I just don't think it can be my main device.

I pretty much agree with you on all levels:

1. you can't take more than 2-3 dabs before it gets hot enough for a possible battery issue
2. The flavor is slightly "burnt" to me, even on low temp, even with ceramic. Not so much that I won't use it, but it's not even close in flavor to say my liger with SiC insert.
3. I have cleaned it with ISO before use and I put it on the top of a carb cap handle and torch it after 1-2 sessions with a cigar torch, like when you "season" a real nail. Comes out spotless and odorless, but the taste still isn't great.

Definitely can't see it replacing my enail.

What I have found it very effective for is taking a single, large "snake" dab. I can sneak out to the garage with no setup or heating, 30 seconds later I'm pretty much as high as I want to be. But it tastes gross. :-)
 
papapotbelly,
  • Like
Reactions: Danksta

Danksta

Well-Known Member
Well my ErrlMOD lasted 6 good days until calling it quits yesterday. It no longer is being recognized by my mod. I've emailed Edabs already and am waiting to hear back. Hopefully they can get a replacement shipped quickly. I've already ordered everything needed for a dedicated enail setup.

I should have invested in an enail setup instead of $50 box mod + $80 for the ErrlMOD. After more research I've learned these portables are nice, but they still don't offer the same kind of dab you get from a real rig. The dishes don't get hot enough. The center pin gets the hottest.

These aren't enail replacements like some ebay sellers suggest. Still a fun novelty item though.
 
Danksta,
I have noticed that if you blow into the bubbler you can actually blow all of the liquid out of the other end. Once again I use the Dr. Dabber brand and I am impressed. I have a traditional rig setup that is collecting dust now. I do agree that taking a long snake dab without wasting product is virtually impossible, but my tolerance has not reached a point where that matters, and even if it did I would probably just take 2 consecutive dabs. I also have realized that if I clean the nail with a cotton swab after every use this will keep the dab tasty as well as making sure there isn't a coating of wax that is preventing the nail from reaching its full heating potential. I have never used a box mod and I did notice the adapter on the website but I have not been able to convince myself that I really need it :shrug:
 
MoneyVapeTheWorldGoRound,

mrbonsai420

Accessory Maker
Accessory Maker
I received my Greenlight version of the 510 henail. It has the ceramic top and screw in ceramic nails. It came in a nice pelican style case and it holds an extra battery plus your mod and a few other atomizers in the case as well. It does work in Temp Control mode with my VTC Mini. I was using it between 45 and 55 watts in Ni TC mode and a little less in VW. One big plus is that the glass from these also fits the Divine tribe 2.7 mouthpiece with a piece of tubing like a glove so I don't have to carry my PWTA too!

I first posted this review of the PTFE top 3 click type unit with Ti and this is MUCH better. The box mod gives you so much more power and control and the ceramic top, although more fragile, is a huge improvement over the PTFE that was melting under extreme conditions.
On the down side I was sent 2 Atomizer units and 1 was DOA? They do have a warranty service department in Ca. so we will get to test that out at least. I have several G9 products and this is my first faulty unit so I feel confident they will replace it

So in conclusion this is definitely bringing the Henail back into the rotation where the DT atty took over! They can now share the spotlight...and the battery and case.

B6CF91B7-3C5C-40E9-83B0-5FABE07163EB_zpsjgmrxxle.jpg
303BE1BD-9CF3-45DC-B538-7DBEFE382D52_zpsgbp8ezf2.jpg
8D436DF7-16DB-49EF-A9DF-54FA720857BC_zpsy41sh7pu.jpg
2BC25885-F15A-40E0-923B-433BA31E89BB_zpsaikllzpm.jpg
01BAA6FF-1143-4070-B7E2-0870DE327D96_zpsmo5wslle.jpg
2B4134C9-1EE9-4947-B289-C15EF4A4B487_zps2pwgf9uo.jpg

5F642C1B-C088-462B-9A27-CAB101AFFEB2_zpseqobapjv.jpg
 
Last edited:

Hoosier

Well-Known Member
Anyone else see that edabs now is carrying a "KT 510 nail"? Looks like the same thing as the bolt and boost version of the 510. At $49 for the 710 sale = I'm in for one!
 
Hoosier,

Joel W.

Deplorable Basement Dweller
Accessory Maker
It does work in Temp Control mode with my VTC Mini. I was using it between 45 and 55 watts in Ni TC mode and a little less in VW

Very cool. How long does it take to heat up with those settings?
 
Joel W.,

StickyShisha2

Well-Known Member
I received my Greenlight version of the 510 henail. It has the ceramic top and screw in ceramic nails. It came in a nice pelican style case and it holds an extra battery plus your mod and a few other atomizers in the case as well. It does work in Temp Control mode with my VTC Mini. I was using it between 45 and 55 watts in Ni TC mode and a little less in VW. One big plus is that the glass from these also fits the Divine tribe 2.7 mouthpiece with a piece of tubing like a glove so I don't have to carry my PWTA too!

I first posted this review of the PTFE top 3 click type unit with Ti and this is MUCH better. The box mod gives you so much more power and control and the ceramic top, although more fragile, is a huge improvement over the PTFE that was melting under extreme conditions.
On the down side I was sent 2 Atomizer units and 1 was DOA? They do have a warranty service department in Ca. so we will get to test that out at least. I have several G9 products and this is my first faulty unit so I feel confident they will replace it

So in conclusion this is definitely bringing the Henail back into the rotation where the DT atty took over! They can now share the spotlight...and the battery and case
2BC25885-F15A-40E0-923B-433BA31E89BB_zpsaikllzpm.jpg

what are you using to fit that on your DT?

i'm thinking i want something like this in my line up. I should be able to power the henail with my tc100w, as soon as i replace the 2x 18650 i needed elsewhere.

is this what I should buy? http://www.ebay.com/itm/231911587248
 
StickyShisha2,

mrbonsai420

Accessory Maker
Accessory Maker
mrbonsai420,

Hoosier

Well-Known Member
http://edabsdirect.com/products/kt-...50w-100w-mod-box-required?variant=18864936453

I have this one but the Dr. Dabber branded one and it is the best out of the g9 and errlmod. Haven't tried the source nail yet, but I will try that if the boost mod breaks.

I have the source, don't waste your time, doesn't hang with the G9, ErrlMOD, or this new one from Edabs.

The KT 510 just came in today. Most similar to the greenlight 510nail, but it didnt break within the first 5 uses, so its already got the g9 one beat.

The quartz on mine tastes worse than my Errlmod. I know others have thought the errlmod quartz tasted off, so who the hell knows... I noticed that the instructions on this one suggested using much lower wattage than the others came with. I didnt really follow the instructions, but did lower my wattage to 50w (noramlly run 60+ with my errlmod). This thing seemed to heat up plenty and delivered right on par with the ErrlMod. So far seems like a winner. Whats next? :)
 

tylerj55

Well-Known Member
I have the source, don't waste your time, doesn't hang with the G9, ErrlMOD, or this new one from Edabs.

The KT 510 just came in today. Most similar to the greenlight 510nail, but it didnt break within the first 5 uses, so its already got the g9 one beat.

The quartz on mine tastes worse than my Errlmod. I know others have thought the errlmod quartz tasted off, so who the hell knows... I noticed that the instructions on this one suggested using much lower wattage than the others came with. I didnt really follow the instructions, but did lower my wattage to 50w (noramlly run 60+ with my errlmod). This thing seemed to heat up plenty and delivered right on par with the ErrlMod. So far seems like a winner. Whats next? :)
I have been using 55w 560tc and it has been pretty nice for me. I do about two heat ups, so about 20 seconds. And thank you for the warning about the source, the bigger dish was interesting but that's the only reason.
 
tylerj55,

subway13029

Well-Known Member
My question about the box mod version vs the the one that comes with its own battery like the boost or bolt is on the box mod say you have one button to fire it up do you have to hold the button down for a certain amount of time until it's ready to dab with? Vs the,battery version where u can cycle it on and light will change when it's ready to dab or u can cycle again for hotter temp..I'm clueless about the box mod version..it seems better maybe so what's the opinion or way to best use it?
 

tylerj55

Well-Known Member
My question about the box mod version vs the the one that comes with its own battery like the boost or bolt is on the box mod say you have one button to fire it up do you have to hold the button down for a certain amount of time until it's ready to dab with? Vs the,battery version where u can cycle it on and light will change when it's ready to dab or u can cycle again for hotter temp..I'm clueless about the box mod version..it seems better maybe so what's the opinion or way to best use it?
You definitely have to hold the fire button down until it's hot enough. I prefer it because it heats up a lot quicker. I can cut my dab and take it and be done in 30 seconds roughly.
 

subway13029

Well-Known Member
So u hold the fire button until you think its ready??is there any indicator or way to know you are ready to dab?
 
subway13029,

subway13029

Well-Known Member
Yeah g9 always comes at me with a higher offer than it says and what others pay. They keep shooting emails and the pricrs are insulting..its crazy some of the quotes i get??
 
subway13029,

mrbonsai420

Accessory Maker
Accessory Maker
should i counter offer or just wait? i'm not in a rush for it

If that's with EMS shipping that's probably about right. I haven't tried the edabs one but I find it hard to believe that one is better than the other. I would be wiling to bet that they are all close to the same device, but I know that G9's came out long before any of the others which leads me to believe it is the original. As far as longevity is concerned I have only used my G9 one maybe 30 times so far but it's holding up well to red hot heat ups for cleaning so far. I have my first email on this product from them almost a year ago when they were still using PTFE for the tops. They all look like the exact same very simple ceramic heater with screw on nail on a ceramic top now. Most of the real electronics you provide yourself with the box mod. $50 shipped sounds fair for the G9 or Errl mod. Mine came with 2 atomizers and 3 nails, not sure if that's standard or not? and the little pelican style case is pretty nice! Much better than the crappy aluminum box most give you. Maybe the Errlmod is a little better for the extra $20, I have no idea? They look exactly the same to me minus the carb cap.


Try sending them this link and see if they can beat that price and give you one for $40 shipped perhaps? You can always ask for a slow boat shipping quote to see if they can do tha for less.
http://edabsdirect.com/collections/...50w-100w-mod-box-required?variant=18864936453
 
Last edited:
mrbonsai420,

Hoosier

Well-Known Member
If that's with EMS shipping that's probably about right. I haven't tried the edabs one but I find it hard to believe that one is better than the other. I would be wiling to bet that they are all close to the same device, but I know that G9's came out long before any of the others which leads me to believe it is the original. As far as longevity is concerned I have only used my G9 one maybe 30 times so far but it's holding up well to red hot heat ups for cleaning so far. I have my first email on this product from them almost a year ago when they were still using PTFE for the tops. They all look like the exact same very simple ceramic heater with screw on nail on a ceramic top now. Most of the real electronics you provide yourself with the box mod. $50 shipped sounds fair for the G9 or Errl mod. Mine came with 2 atomizers and 3 nails, not sure if that's standard or not? and the little pelican style case is pretty nice! Much better than the crappy aluminum box most give you. Maybe the Errlmod is a little better for the extra $20, I have no idea? They look exactly the same to me minus the carb cap.


Try sending them this link and see if they can beat that price and give you one for $40 shipped perhaps? You can always ask for a slow boat shipping quote to see if they can do tha for less.
http://edabsdirect.com/collections/...50w-100w-mod-box-required?variant=18864936453

I own them all. Unlike the original h-enails, all of these are actually different, and they also perform differently. Fun times for those of us that like to try a lot of different things.

I also find it interesting that Dr. Dabber and Dabado both went with a manufacture different than greenlight for the 510nail design... Pretty telling, really.
 
Hoosier,
Top Bottom