Vapman
- Thread starter spyder
- Start date
-
- Tags
- flame powered
Chandler
Well-Known Member
Beautiful! what kind of wood is that, and how did you know it was available? purchased directly from @vapman?Very fortunate I was able to snatch this one up while it was still available
I ordered 3 of these off your reccomendation about 2 weeks ago... about how long did they take to ship out to you?? i should've ordered like 10 of em'! so i wouldn't have to order again!!
OF
Well-Known Member
IIRC it takes several weeks, and there's no notice, but we're talking free shipping on a sub 3 dollar thing. Hard to complain too much, really, if it gets here.
I've done just what you suggest, but a few at a time. I'd order a couple more with something else from that seller, or even order one or two from both at the same time like I did at first. If you've got a working one in your hand and a spare in the drawer in the kitchen most of the worry goes away.
Good luck on the wait, I'm sure you'll love them when you get them. And next time you're a few bucks ahead might even order a couple more for friends, and backup for your backup of course?
Regards to all as we ready to celebrate Independence Day! Hopefully, as time goes on, that will include the independence to decide for yourself to use cannabis or not for one and all citizens.
OF
Chandler
Well-Known Member
So dissapointed. can't find my torch
its almost worse than running out of batteries... torch cost me 30$.Yesterday i dropped it out my lap as i exited my vehicle. scuffed up the top and i thought 'damn, need to take care of this thing. its too precious to destroy'.... smh now today i can't find it... worst of all, no back up!!! grrrrrrr
Last edited:
M0J0
I am a leaf on the wind ~ watch how I soar...
Chandler
Well-Known Member
Nice! And very interesting. I'm bout to go research those trees. Thanks for the response!!..... I Rarely use Facebook, but i now realize i need to pay more attention!
Chandler
Well-Known Member
i'm just curious, but was the ash tree VM also shown on vapman.com? like how right now you can see he has limited edition yew tree vapmans at the moment? i'm just wondering because after going on facebook i can see the Ash tree VM picture, but it offers no information about it, no indication it was on sale. This info is vital to me as i'd hate to miss out when ebony vm's are available. thanks!
P.S. about my lost torch.... yesterday after work i wanted to use my VM but couldn't obviously without a torch. i looked at my Crafty, and instead of just loading it up, i drove around till i found a shit torch so VM and i could be as one. Its safe to say i enjoy VM more than crafty. The woody taste has disappeared and is only really evident when applying generous amounts of heat. otherwise VM has taken over 1st place in the flavour department. i can get consistent continuous first hit flavor for multiple draws. i love it. i can't reproduce the continued flavor with crafty.
i know instruction say 'only use a jet flame torch' but what would occur if i used a Bic lighter??
Last edited:
M0J0
I am a leaf on the wind ~ watch how I soar...
Don't try a Bic Lighter.
Don't use a three flame torch or one of those big-ass torches either.
You'll just ruin the vapman.
I've seen jet lighters everywhere. In a pinch, Walmart is selling a jet lighter/multi-tool dealio at the cash registers for a few bucks. It should work.
If you're in the US, I can get you a vapman lighter in your hands in a couple of days too. Just PM me and I'll give you a special price.
Peace.
Gourmet
Well-Known Member
I would't try this. Like M0j0 already said, it will ruin the VM. The normal bic-lighter can't bring that amount of heat in a short time, you have to heat too long (not good for the middle-piece) and it will give a lot of soot.A bic "might" work. I certainly haven't tried it but a bic flame is not directional, you would have to heat blind by heating the VM vertically and holding the flame under it. I predict lots of scorching.
gkaraman
Well-Known Member
Hello,
Vapman on summer mode !!
Now I have also Haze which is very practical and good on the go but I realized even better how magical Vapman can be a champion on extract less material with better power on effects!!
The only tricky accessory after 2 years is the lighter. My last vapman lighter has a little problem. The plastic thing for setting the heat up and down is already in the end of his turn and set by default in the low producing heat. So I can't increase my flame. And I have many clicks that can't produce flame.
Can I manually fix it with screwdrivers and etc ?
Vapman on summer mode !!
Now I have also Haze which is very practical and good on the go but I realized even better how magical Vapman can be a champion on extract less material with better power on effects!!
The only tricky accessory after 2 years is the lighter. My last vapman lighter has a little problem. The plastic thing for setting the heat up and down is already in the end of his turn and set by default in the low producing heat. So I can't increase my flame. And I have many clicks that can't produce flame.
Can I manually fix it with screwdrivers and etc ?
OF
Well-Known Member
If I follow what you're saying, you want the dial 'to turn further', that is move the stop? Yes, you can do that, gently pry the knob off the shaft, it's pressed over the brass body of the valve which has grooves knurled into it. Easy enough, just be careful to go straight up and down after rotating some?
Combusted lastnight in my Vapman
I think a lot of us have done this, it's not really fatal although you might think so at the time. No need to tell us it was the last heating that did it........by definition it always is......nobody gets a hit like that and asks for another.
Iso wipe downs for the pan, removing and 'flaming' the screen and half a dozen pipe cleaners did the mid section and a ISO soaked pipe cleaner did the MP for me. Most of the smell gone, the rest in a bowl or two.
IMO this is a very useful lesson, even if a mite unpleasant sometimes. It's good to know where the limit is, so it can be religiously avoided in the future?
OF
grrrrrr. Shit torch didnt even last two days!
botanicalman
Well-Known Member
at the moment it will be bad, But i honestly just wiped the trench and after some uses the smell went away.Combusted lastnight in my Vapman
Urgh i really need to find a Chilean torch lighter seller, I have been using mine for over a year, sometimes it works strange but i never had problems with it, but im starting to worry if it suddenly stops working on a session haha
scottg402
Well-Known Member
The Vapman Station has landed! Along with Yew Tree and American Walnut Vapman's!
What can I say? I am blown away by this beautiful gift! Thanks again Rene @vapman ! It's love at first site!
My wife is jealous!
I will provide my full impression later but I wanted to stop by to show off my new toys and thank Rene again. Here is a teaser before I go.
Using the Yew with flower for now and loaded the Walnut up concentrate. Here is the concentrate warming up...
Green means go! Mmmmmmmm tasty goodness!
And lookey here, I made room for my new toys. They already feel like they have been there forever!
Thanks again @vapman and congrats again on 10 years!!!!
What can I say? I am blown away by this beautiful gift! Thanks again Rene @vapman ! It's love at first site!
My wife is jealous!I will provide my full impression later but I wanted to stop by to show off my new toys and thank Rene again. Here is a teaser before I go.
Using the Yew with flower for now and loaded the Walnut up concentrate. Here is the concentrate warming up...
Green means go! Mmmmmmmm tasty goodness!
And lookey here, I made room for my new toys. They already feel like they have been there forever!
Thanks again @vapman and congrats again on 10 years!!!!
@gkaraman Try to get that black plastic ring out of your lighter, it will allow you to increase the gas flow with a screwdriver. The plastic ring is only pushed on to the valve screw. By placing the plastic ring in a new position, you can use it as before.
Hope this helps!
@scottg402 Thank you for the pictures and the good news, it is much appreciated!
Great to see it all arrived safely and you had a successful inauguration.
I wish you much joy with vapman!
Kind regards to everyone!
vapman
Last edited:
Gourmet
Well-Known Member
Congratulation and welcome to the club of station users!
You got a huge amount of vapos, I'm impressed!
I'm curious, how much resin/rosin did you put on the extract-screen?
Thanks for sharing the first impressions! I wish you furthermore a good time with your new magic vape device!
Last edited:
Highonu
Well-Known Member
I've had the station for a few days now. This thing has taught me patience. I get a nice little session on setting 2-2,5. And great for sharing. And my lighter game improved, I was being too aggressive before. So I downshifted kind of and feel like I am getting a better range now. I still love to be able to finish a bowl in 4 hits tho
M0J0
I am a leaf on the wind ~ watch how I soar...
I've mentioned this before, but it may be good to repeat:Combusted lastnight in my Vapman
If (or when?) you combust, Do NOT draw on the mouthpiece - unless you didn't notice the smell before you inhaled.
If you do draw, stop as soon as you notice the horrible taste.
The crucible doesn't hold the bad taste but the wooden middle section does. - If you don't inhale, the middle section will not get contaminated...
You can usually smell the very strong and somewhat different smell before you draw, but you may be too medicated to notice, though.
If you do draw on it after combustion, clean the middle section with a cotton swab (Q-Top) dipped in Pure Acetone (Never use nail polish remover). If you wen to town drawing on the nasty smoke, you may have to dip the middle section in acetone for a few minutes, then wipe inside with cotton swab until clean and then let dry till next day.
But the key is to try Not to draw on the mouthpiece as soon as you notice combustion - if at all posible. If you don't draw, it's not a big deal at all.
Hope this helps!
WakeAndVape
VapeLife X
I can only imagine...the best way to hit the flight box was to breathe through your nose!
Slow hits indeed!!!
I get mine up to pretty high temps and rip it. No soft draw speed here and I get huge amounts of vapor.