wildything
Well-Known Member
Thanks for the idea. My old gameboy case is perfect. Also I found out I can get 6 dosing capsules and 1 concentrate pad in the original loading tool container.
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
newVaper420
Vapor Enthusiast
On this game topic I use my Nintendo 3DS pouch that I got from Club Nintendo a while ago :-)
Governmentchz
Member
I've got an update. It's been 3 days since I reached out to Storz & Bickel regarding the malfunctioning power button on my Mighty. They responded the next day (Tuesday), and sent me an email confirmation of receipt of my RMA request..."pending approval". Yesterday, I got a confirmation email of "approval" along with an RMA # and UPS pre-paid shipping label. I boxed the cleaned main unit only as requested by them, slapped the label on it and put it in the mail this afternoon. So far the process has been smooth as silk.
jeffspc88mx
Shortcuts to bliss
Is that for a Mighty? I'm showing 5.5 x 2.1mm (x 9.5 mm long) for my Mighty (measuring the S&B stock power supply with my calipers). Knowing that, Amazon has a car charger for Mighty much cheaper than S&B: HitCar 12V 12-Volt 24V DC 2.1mm Car Truck Bus Van Boat Cigarette Lighter Power Supply Adapter Charger Cable
Last edited:
nb8475
Well-Known Member
Anyone got any recomendations for a good piece to filter mighty vapor? I have a silicone whip, need a 14m bubbler/bong. I had one for 2 years then it broke. I bought a new small bubbler yesterday and broke it a couple of hours ago.
So can anyone recommend a good site to buy some glass?
So can anyone recommend a good site to buy some glass?
Eatrocks
Well-Known Member
Get the arizer equipment whip/dhgate.com glass combo
Spocks_Katra
Well-Known Member
I have a question.
My mighty has been acting uo lately and I cannot tell what is wrong with it. It works fine, but after a session there is a "Pop" in one of the battery compartments. If I am holding the mighty I can feel it and I can hear it as well. It almost seems like something is either popping out of place or popping back into place.
Has anyone had this happen? Or any advice would be appreciated.
My mighty has been acting uo lately and I cannot tell what is wrong with it. It works fine, but after a session there is a "Pop" in one of the battery compartments. If I am holding the mighty I can feel it and I can hear it as well. It almost seems like something is either popping out of place or popping back into place.
Has anyone had this happen? Or any advice would be appreciated.
Mine does it about 3 or 4 times as it cools down after a session. So far it's working great I've had it for 2 months.
vapviking
Old & In the Way
A nice little piece that's available in US is the Magic Flight Orbiter. It accepts 14mm, I believe.
The older it gets, Mighty develops more creaks and crackling noises, like us but much sooner...
StRaNgEcLoUdS
Well-Known Member
Mighty dosing capsules arrived yesterday... These things are the Beezneeez
Full nice even extraction every time. Super practical for work/on the go. Didn't think anything could improve this already amazing device...Man was I wrong!!!
Full nice even extraction every time. Super practical for work/on the go. Didn't think anything could improve this already amazing device...Man was I wrong!!!adam_baumm
Well-Known Member
I have a mighty. Daily heavy use since Nov 2014. Love it. Now with capsules clean loads and pop in and out.
Finally sending my 000500 ish sn mighty in for rma.
Still works flawlessly. But 3 of 4 posts have broken of top of unit. And the internal parts move a little inside (they started putting in some padding after my unit was made.)
I also want the firmware update. I'm at 1 minute autoshutoff which is fine. 2 minutes will be great.
I'll keep you posted on my rma experience.
Much love
Finally sending my 000500 ish sn mighty in for rma.
Still works flawlessly. But 3 of 4 posts have broken of top of unit. And the internal parts move a little inside (they started putting in some padding after my unit was made.)
I also want the firmware update. I'm at 1 minute autoshutoff which is fine. 2 minutes will be great.
I'll keep you posted on my rma experience.
Much love
whatitdew
Vapes R Great
I use a Vatra coffin padded soft case that fits the just the mighty nice. also a larger Vatra domino soft case that has a second storage to Carry more accessories like brush, extra CU, packing tool etc. I highly recommend Vatra brand. I also have a pelican 1150 I cut out the foam to hold the mighty with all accessories for camping/hiking trips.
Cnova203
Active Member
Thanks for the fast reply is this the coffin case you are talking about https://vatra.com/product/6-coffin/#.V3hKFfT3aJI
Eatrocks
Well-Known Member
The general rule with these li-ions is to keep them between 40-80%, too little battery or too much stresses the cells and causes it to heat up adding to reduced battery life...
What I try to do it throw it on the charger when I hit 2-3 bars and I try to pull it off before the last bar starts blinking...but that's hard to do lol.
Still remember these aren't the crap Chinese 18650s...all german with sensors hardwired in.
Spocks_Katra
Well-Known Member
thank you for the reassurance. its still working great I was just a bit worried
vapviking
Old & In the Way
I would really love to see an answer to this question come direct from S&B. I have seen literature about care of Li-ion batteries, and the good practice of a Goldilocks approach - not too low and not too full. Sure, this is science and it's pretty clearly true.
However, as @Eatrocks is saying, the device, as many do, probably has some amount of battery management built in to the circuitry. Idk more about that, but my imagination tells me they might do some things like; unit shutting off before battery is really fully depleted, or; unit slows and/or stops charging before fully charged, even if showing 'full' bars.
I was told a year ago by a S&B rep that Crafty is not a 'smart' device, which I distinguish from say, a Pax2, which says right in the packaging that it is a smart device. Pax doesn't care how much time it spends on charger, while Crafty/Mighty apparently do. So I'm just saying we can't necessarily second-guess the device.
All this said, do I coddle my Mighty and set a timer to take it on/off charger? Nope! I do as I please and have a great-working Mighty for almost 9 months now. I see that lately if bars are low it takes a little longer to get to temp., but not very much longer (yet). I assume that one day it will need new batteries, if the rest of unit itself lasts so long. At that point I may have to hone my soldering skills!
newVaper420
Vapor Enthusiast
Yeah at the beginning I was concerned about when or not to charge. I just have two rules now. Charge it when I think I will need a full charge. And 2. Don't charge it while the unit is hot.
Eatrocks
Well-Known Member
That's not a sign of battery degradation. My month old mighty does the same and did on day one. It takes a little longer to reach temp with a half drained battery....haven't used mighty all week
...these dang wax pens just so dang convenient and effective....That's not a sign of battery degradation. My month old mighty does the same and did on day one. It takes a little longer to reach temp with a half drained battery....haven't used mighty all week
Most vapes are the same way. A fully charged battery will usually heat any vape faster than one that's almost drained.
whatitdew
Vapes R Great
Yeah the 7" one. the plastic clip is the only thing I don't like mine snapped right away.put my mighty in that and throw it in my pack. It will only fit the Mighty itself without charger or any extras.
Either that one or the 7" Domino case for a bit bulkier case with more storage options.
Eatrocks
Well-Known Member
Dang I didn't think the coffin ones would fit it...I was looking at the vatra fly xo bag in all black with orange accents (just like mighty
). It was 7×5" so it should have room to spare but I know all these bags have a ton of padding in them not leaving a whole Lotta room.