Sticky Brick Labs Vaporizer

Custom Flower Hardware

Well-Known Member
Manufacturer
Thanks Randy from Puff it Up! :tup: You the man wit the master plan!:rockon:
GzIm1o5.jpg
 
Last edited:

WakeAndVape

VapeLife X
@ShayWhiteGrow looking good...can I borrow it? Lol

@Oogendoogan I'm sure it will smash the vapcap, not saying it's NOT good...but if what I understand about it is correct it preforms similar to the Vapman (which I love btw)

But the brick will hit you like a brick to the face...it's the most amplifiable flame powered I own if that makes sense?

Come to think of it...you need a stickybrick in the lineup @AJS, I WAS right about the vapman???
 

Oogendoogan

Well-Known Member
@ShayWhiteGrow looking good...can I borrow it? Lol

@Oogendoogan I'm sure it will smash the vapcap, not saying it's NOT good...but if what I understand about it is correct it preforms similar to the Vapman (which I love btw)

But the brick will hit you like a brick to the face...it's the most amplifiable flame powered I own if that makes sense?

Come to think of it...you need a stickybrick in the lineup @AJS, I WAS right about the vapman???
Yeah man it seems like my type of vape. I wanted a daisy forever and the only reason I haven't been following these closely was because I was running a Lsv SSV and now I'm using a Milaana, solo and Evo. Lots of changes lol. And idk man as far as conduction goes I think the VapCap blows the VapMan away. That's sad to say and I loved my VapMan but said goodbye while I use the VapCap everyday. I've never seen a vaporizer that uses conduction milk a water pipe like the VapCap can. That being said I love convection vapor more than anything in the world and this thing looks like it can be a flame powered convection beast! I owned a lotus and it rocked but I feel like this thing will hit harder and that is insane.. I will forsure be looking at these as my possible next vape ;)
 

Milkytime

Well-Known Member
Brick came today! Didn't have any time to unbox before work. Cant wait to get home and fire this thing up! Puffitup rocks randy sent me a jaryz and snacks! becuase i asked for somthing other than a grinder. Drew a picture and everything! There might be even more goodies as i didn't get a chance to unwrap the brick. Ill try and get a pic up later, thanks again Randy!
 

AJS

Calm Consistency
@ShayWhiteGrow looking good...can I borrow it? Lol

@Oogendoogan I'm sure it will smash the vapcap, not saying it's NOT good...but if what I understand about it is correct it preforms similar to the Vapman (which I love btw)

But the brick will hit you like a brick to the face...it's the most amplifiable flame powered I own if that makes sense?

Come to think of it...you need a stickybrick in the lineup @AJS, I WAS right about the vapman???
You know me too well man. You really do. Unfortunately, my wallet doesn't agree with that at the moment hahaha. But yes, you were right about the vapman. Despite not having tons of use atm, it's one of my favorite vapes and don't think it'll ever get sold. I look forward to getting Brick'd though.
 

IAmKrazy2

Darth Vapor
Damn my VAS! Sticky Brick should be here today, and i should have two GH's on Tuesday and a VapMan Station early next week.

I will probably give some first impressions of the Sticky today, but considering how close it is to the Daisy i know ill love it.

Edit. Got it! Got about 5hrs of work to do at home before i can fully dive in but first impressions are that the finish is better then Daisy, and the overall package and accessories are better too. The glass also seems thicker. More to come.

Double edit. Love the extra magnet for stir stick or tweezers!
 
Last edited:

RUDE BOY

Space is the Place
Always been scared of using torches but this guy looks bad ass and pretty simple to use after a small learning curve. Officially added to the VAS list!

I felt the same way when the daisy was first introduced when it came to using torches but I'm so glad I gave in and bought one, changed the way i look at vaping forever for the better 'cause it's a wonderful vaporizing beast. I'm sure the Brick is just as badAss as the daisy so if I ever have the need to replace what I have now I won't hesitate to pick up a Sticky Brick.

I'm so Glad this vape is garnering attention here and on Reddit, Good Luck to ya @StickyBricks hope you keep producing vapes for years to come.

:peace:
 

IAmKrazy2

Darth Vapor
I ran a ton of bowls through the Sticky yesterday. A few small diifrences from Daisy, most i would venture to say are slight improvements, but functionally it is the exact same. Huge instant clouds of vapor with a minimal learning curve.

I will get up some clouding videos eventually but anyone who is on the fence, this one already has my Krazy endorsement.
 

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
Thanks Randy from Puff it Up! :tup: You the man wit the master plan!:rockon:
GzIm1o5.jpg
Hola FC:
I saw you have an EVO.
Just for the sake & fun...
Have you ever tried a 3PM heat soaked for an hour EVO as a torch??? Makes sense???
I wonder if you can make a seal very carefully, between the 18M EVO joint and The Brick heat intake. Makes sense???
Not pushing it or ramming it or anything like that, you know what I mean. Very gentle glass to glass mating.
A parchment paper ring/seal like a cone will help if you try to match them.
Probably it'll be enough heat if you make a proper seal ;)
Talking about 2 beasts together. Happy findings ;)
Stay vaped...
 

little maggie

Well-Known Member
Not to be off topic but does anyone own a lily and brick? Im trying to justify the purchase, so Im curious how similar they are ;-)
I'm in the minority. I have a lily and a daisy. They both use butane but other than that they are quite different- or as different as the daisy is from some of the other butane vapes. The lily has fewer parts and is much harsher than the daisy. Fortunately it does have a water connector. I'm looking forward to the water connector from the Brick folk for the daisy. The only vape I can use without water is the dynavap.
 

RUDE BOY

Space is the Place
Hola FC:
I saw you have an EVO.
Just for the sake & fun...
Have you ever tried a 3PM heat soaked for an hour EVO as a torch??? Makes sense???
I wonder if you can make a seal very carefully, between the 18M EVO joint and The Brick heat intake. Makes sense???
Not pushing it or ramming it or anything like that, you know what I mean. Very gentle glass to glass mating.
A parchment paper ring/seal like a cone will help if you try to match them.
Probably it'll be enough heat if you make a proper seal ;)
Talking about 2 beasts together. Happy findings ;)
Stay vaped...

A torch is at least 1300 degrees centigrade. Just How hot does the EVO get ?
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
I actually just got some different tubing to make a mod for my apollo and finally decided to try this and it totally worked. It's 1/4 i.d. silicone which I actually just put into @Ratchett s song which goes into a 18mm whip adapter and then into a bubbler. It's amazing, the only weird thing is I kept forgetting to cover the carb hole. The hydroblock will be a lot less awkward. Please ignore the dirty glass.
fa7w9g.jpg
 

StickyBricks

Well-Known Member
Manufacturer
I ran a ton of bowls through the Sticky yesterday. A few small diifrences from Daisy, most i would venture to say are slight improvements, but functionally it is the exact same. Huge instant clouds of vapor with a minimal learning curve.

I will get up some clouding videos eventually but anyone who is on the fence, this one already has my Krazy endorsement.

Glad you are enjoying it and greatly appreciate the Krazy endorsement. looking forward to the vids.

Only issue and not aure if its issue is my glass mp wobbles quite alot when its seated in its spot??anyone else?

Yes, anyone else?
@WakeAndVape he is using one, as the betas were drilled slightly differently so I included two o-rings with yours. The production versions seemed snug enough with one while still allowing for some movement in case of drops. If anyone feels like there is too much play in the mouthpiece I would like to know.
 

Nssl

Well-Known Member
Glad you are enjoying it and greatly appreciate the Krazy endorsement. looking forward to the vids.



Yes, anyone else?
@WakeAndVape he is using one, as the betas were drilled slightly differently so I included two o-rings with yours. The production versions seemed snug enough with one while still allowing for some movement in case of drops. If anyone feels like there is too much play in the mouthpiece I would like to know.
Mine wobbles a little but it doesn't seem like it will be a problem
 

C-weed

Well-Known Member
I have a question for you Sticky Brickers.....suppose you replaced the flame from the butane torch with a ceramic heating element?.....like a hakko or the herb iron?...just wondering if this has any potential......possibly stick the element slightly down the glass tube?
 

Vapor_Eyes

taste buds
I thought I had my VAS under control, I really did. I had a vape for every situation... or so I thought. It slowly dawned on me that I need at least one butane vape to complete my arsenal. After much thought, contemplation, and internal debate, I chose the Sticky Brick.

There's just something about it that makes it almost like a functional art piece. Actually, it is a functional art piece. It looks beautiful and seems to work just as well. I'm a dry guy and this looks like it will give me that bong experience with the flavor and robustness of dry hits.

And I keep telling myself I need a butane vape for when the power goes out, and for camping, and hiking, right?

I will report back when I have a chance to use my new toy.
 
Top Bottom