DarkSm0ke

Well-Known Member
@DarkSm0ke you can vaporizer the oil that you scape off the stems. If you use a long cotton type swab then take the cotton off and vaporize it in the nano. Nothing goes to waste.

Then you can reuse your ABV by making butter or oil. It's all good when you vaporize.

That is totally an awesome IDEA!

I am going to clean with that in mind. I notice the abv from the nano is darker than what I get from my mobile units. I guess it is just really efficient :lol:.
 

ataxian

PALE BLUE DOT
That is totally an awesome IDEA!

I am going to clean with that in mind. I notice the abv from the nano is darker than what I get from my mobile units. I guess it is just really efficient :lol:.
I had a few portables and plug-ins.
Years ago when they first came out I got one because the report from @Enchantre was so positive.

I still use it a lot even today.
I changed vaporizer's like socks.
However having said that the NANO I enjoy daily still today!

FLAVOR is over the top.
EFFECT insane as in good.

I like the size and with a medium size can on your water-pipe your in the vapor zone!

I'm having FRENCH ROAST and LARRY LEMON so I can read fast. (NANO through water)

ENJOY!
RFjkfvl.jpg
 

CarolKing

Singer of songs and a vapor connoisseur
I will have to buy more stems. Love the new silicone guard/grips. I'm getting nanoed with a little bit of Premium GS Cookie on this warm Friday evening. Bill Maher starts soon. It should be pretty good - it's been a good political week.

 
Last edited:

Urungus

Well-Known Member
Hello, long time listener first time caller.. After looking for a good at home vape that was efficient first and foremost, I stumble across the log vapes and the E-nano. Doing some research and it seems like these guys are the way to go. Especially for my style - "the drive by sipper". I like to hit it, put it down and do whatever, come back and take another hit, etc. I've been using the old trusty brass one hitter for decades lol. Say what you will but I just like a buzz and I don't like to waste product. So it's been the best match for me since, well, forever.. When I want to be heavily medicated I pull out the bubbler as I have an O-ring around the brass oney and can get there in no time.

Anyway, knowing my style and knowing that I like vaping, I was out on the hunt. I currently have a PAX which is fine but left much to be desired.. It uses quite a bit of product(for me) and being conduction it also affects efficiency. I also wasn't getting to that "spot" with it. That spot where you say ok, I'm medicated enough I don't need any more. In fact, I found I would go back to the brass to get me up over the top when I wanted it.. So I loved it but after a while I found myself going back to the Brass simply out of my cheepness and innability to be where I wanted with the amount I wanted to get there with..

So that brings me to the logs. Researching it seemed like this was the best match for me. Efficient, I can set it down and come back to it, it can work with glass, etc. So looking around between UD and EV, I went with EV. I liked the simple, elegant design a lot. Much more than the other designs by UD(personal preference here). So I pulled the trigger last Thursday the 19th on the Fiddleback E-nano, extra stem, gong and screens. Ordered Thursday and received the Nano on Monday! I was stoked! Fast fulfillment by Andy! Nice!

I open the box and the first thing I see is a nice hand written thank you note. Nice touch! Not many e-commerce sites do this. Like others have mentioned, I knew the Nano was small, but just wasn't expecting it to be THAT small. Immediately plugged it in, left the screen at the designated E-pic height and filled her up with some well grinded flowers(still used to the pax at this point) and I think I set the heat at 5.5. First hit filled my lungs like a balloon! Barely had the stem around the heater as well. Exhaled and wow that flavor! That buzz!! :D Bingo! I was smiling ear to ear :)

After about almost 2 weeks with the Nano and I can say I am in LOVE. I will say I'm still working on getting the consistency of my draws down. I've moved the screen up some but I've found the E-pic height to be the best all around setting. I've also found sometimes I seem to get more draws out of a load than others of the same. Something I just have to play with.. I do like the versatility of it all though.. If I just want to "hit and run" I'll throw a little nug in at stock height, set heat to 5.5 and take draws whenever. Increasing the heat as needed. It works well for when I don't want to go to the moon and just want a buzz. However, when I do want to go to the moon. I find that using medium-fine grind on flowers and filling it with a bit more than a nug's worth, then packing down gives KILLER results. The vapor hits are monster here. This is where I get BINGO consistently. This also works the best on glass for me. Nice milky white draws. So smooth through glass as well.

My wife came home one night that first week and asked me "could you get any higher?" lol. I brought it up to her the other day again and she said "I have never seen you so wrecked". Mission accomplished Andy :)
 

flotntoke

thoroughly vaped
Hello, long time listener first time caller.. After looking for a good at home vape that was efficient first and foremost, I stumble across the log vapes and the E-nano. Doing some research and it seems like these guys are the way to go. Especially for my style - "the drive by sipper". I like to hit it, put it down and do whatever, come back and take another hit, etc. I've been using the old trusty brass one hitter for decades lol. Say what you will but I just like a buzz and I don't like to waste product. So it's been the best match for me since, well, forever.. When I want to be heavily medicated I pull out the bubbler as I have an O-ring around the brass oney and can get there in no time.

Anyway, knowing my style and knowing that I like vaping, I was out on the hunt. I currently have a PAX which is fine but left much to be desired.. It uses quite a bit of product(for me) and being conduction it also affects efficiency. I also wasn't getting to that "spot" with it. That spot where you say ok, I'm medicated enough I don't need any more. In fact, I found I would go back to the brass to get me up over the top when I wanted it.. So I loved it but after a while I found myself going back to the Brass simply out of my cheepness and innability to be where I wanted with the amount I wanted to get there with..

So that brings me to the logs. Researching it seemed like this was the best match for me. Efficient, I can set it down and come back to it, it can work with glass, etc. So looking around between UD and EV, I went with EV. I liked the simple, elegant design a lot. Much more than the other designs by UD(personal preference here). So I pulled the trigger last Thursday the 19th on the Fiddleback E-nano, extra stem, gong and screens. Ordered Thursday and received the Nano on Monday! I was stoked! Fast fulfillment by Andy! Nice!

I open the box and the first thing I see is a nice hand written thank you note. Nice touch! Not many e-commerce sites do this. Like others have mentioned, I knew the Nano was small, but just wasn't expecting it to be THAT small. Immediately plugged it in, left the screen at the designated E-pic height and filled her up with some well grinded flowers(still used to the pax at this point) and I think I set the heat at 5.5. First hit filled my lungs like a balloon! Barely had the stem around the heater as well. Exhaled and wow that flavor! That buzz!! :D Bingo! I was smiling ear to ear :)

After about almost 2 weeks with the Nano and I can say I am in LOVE. I will say I'm still working on getting the consistency of my draws down. I've moved the screen up some but I've found the E-pic height to be the best all around setting. I've also found sometimes I seem to get more draws out of a load than others of the same. Something I just have to play with.. I do like the versatility of it all though.. If I just want to "hit and run" I'll throw a little nug in at stock height, set heat to 5.5 and take draws whenever. Increasing the heat as needed. It works well for when I don't want to go to the moon and just want a buzz. However, when I do want to go to the moon. I find that using medium-fine grind on flowers and filling it with a bit more than a nug's worth, then packing down gives KILLER results. The vapor hits are monster here. This is where I get BINGO consistently. This also works the best on glass for me. Nice milky white draws. So smooth through glass as well.

My wife came home one night that first week and asked me "could you get any higher?" lol. I brought it up to her the other day again and she said "I have never seen you so wrecked". Mission accomplished Andy :)

Great write-up! Thanks for posting the review. nano on, brother!
 

ataxian

PALE BLUE DOT
Hello, long time listener first time caller.. After looking for a good at home vape that was efficient first and foremost, I stumble across the log vapes and the E-nano. Doing some research and it seems like these guys are the way to go. Especially for my style - "the drive by sipper". I like to hit it, put it down and do whatever, come back and take another hit, etc. I've been using the old trusty brass one hitter for decades lol. Say what you will but I just like a buzz and I don't like to waste product. So it's been the best match for me since, well, forever.. When I want to be heavily medicated I pull out the bubbler as I have an O-ring around the brass oney and can get there in no time.

Anyway, knowing my style and knowing that I like vaping, I was out on the hunt. I currently have a PAX which is fine but left much to be desired.. It uses quite a bit of product(for me) and being conduction it also affects efficiency. I also wasn't getting to that "spot" with it. That spot where you say ok, I'm medicated enough I don't need any more. In fact, I found I would go back to the brass to get me up over the top when I wanted it.. So I loved it but after a while I found myself going back to the Brass simply out of my cheepness and innability to be where I wanted with the amount I wanted to get there with..

So that brings me to the logs. Researching it seemed like this was the best match for me. Efficient, I can set it down and come back to it, it can work with glass, etc. So looking around between UD and EV, I went with EV. I liked the simple, elegant design a lot. Much more than the other designs by UD(personal preference here). So I pulled the trigger last Thursday the 19th on the Fiddleback E-nano, extra stem, gong and screens. Ordered Thursday and received the Nano on Monday! I was stoked! Fast fulfillment by Andy! Nice!

I open the box and the first thing I see is a nice hand written thank you note. Nice touch! Not many e-commerce sites do this. Like others have mentioned, I knew the Nano was small, but just wasn't expecting it to be THAT small. Immediately plugged it in, left the screen at the designated E-pic height and filled her up with some well grinded flowers(still used to the pax at this point) and I think I set the heat at 5.5. First hit filled my lungs like a balloon! Barely had the stem around the heater as well. Exhaled and wow that flavor! That buzz!! :D Bingo! I was smiling ear to ear :)

After about almost 2 weeks with the Nano and I can say I am in LOVE. I will say I'm still working on getting the consistency of my draws down. I've moved the screen up some but I've found the E-pic height to be the best all around setting. I've also found sometimes I seem to get more draws out of a load than others of the same. Something I just have to play with.. I do like the versatility of it all though.. If I just want to "hit and run" I'll throw a little nug in at stock height, set heat to 5.5 and take draws whenever. Increasing the heat as needed. It works well for when I don't want to go to the moon and just want a buzz. However, when I do want to go to the moon. I find that using medium-fine grind on flowers and filling it with a bit more than a nug's worth, then packing down gives KILLER results. The vapor hits are monster here. This is where I get BINGO consistently. This also works the best on glass for me. Nice milky white draws. So smooth through glass as well.

My wife came home one night that first week and asked me "could you get any higher?" lol. I brought it up to her the other day again and she said "I have never seen you so wrecked". Mission accomplished Andy :)
sviglRF.jpg

I had like 3 GonG's already with my NANO.
After 20 pages I was wrecked!
Thank you for the inspiration!
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
dn5fdms.jpg

Bill Maher I watch Sunday mornings on youtube!
These cover's are just what I needed.

Mine just got here too. It was like opening a stocking stuffer in June. Looks cool and gives that extra grip when your glass joint sticks.

I immediately took the plain silicone cover off my GonG and swapped in the new epic. I then realized I had the logo upside-down, so I pulled it off and flipped it over. After snugging it into position, I realized the logo was upside-down again. This befuddled me for a few seconds until I realized the logos on either side run opposite each other.

:goat: <--- Don't hate my goat.
 

Vapor_Eyes

taste buds
My wife came home one night that first week and asked me "could you get any higher?" lol. I brought it up to her the other day again and she said "I have never seen you so wrecked". Mission accomplished Andy :)

I remember that first week 9 months ago. I got ridiculously high... in the name of science of course. :sherlock:

My latest experimental tool is a claisen/y adapter. I tried it for the first time and the results are just as good as hoped. It's taking me an hour to make this post. :science:

Keep your hands warm nano nation!

iFZApsA.jpg


Edit: I didn't realize until now how ironic it is that my portable (CFX) is bigger than my desktop vape. The E-Nano definitely earns the name.
 
Last edited:

Urungus

Well-Known Member
I remember that first week 9 months ago. I got ridiculously high... in the name of science of course. :sherlock:

The things we do in the name of Science :D

Nice thing I forgot to mention is that for myself, I don't feel the need to go back to combustion to feel satisfied anymore. Like I did with the Pax. The Nanos can get me beyond satisfied pretty easily if I want it to. Which is kind of fun! With the old brass I could get pretty high with the bubbler. But that was like a 7, this thing gets me to 10(and once to 11!) no problem and with minimal flowers.

It's still fun learning this thing!
 

Vapor_Eyes

taste buds
The things we do in the name of Science :D

Nice thing I forgot to mention is that for myself, I don't feel the need to go back to combustion to feel satisfied anymore. Like I did with the Pax. The Nanos can get me beyond satisfied pretty easily if I want it to. Which is kind of fun! With the old brass I could get pretty high with the bubbler. But that was like a 7, this thing gets me to 10(and once to 11!) no problem and with minimal flowers.

It's still fun learning this thing!
I agree about the nano being a great tool to replace combusting. It was what I used and the process was painless.

The nano is capable of potent, dense hits that are almost indistinguishable to those I would get from smoking. So many times I have had to check to make sure I didn't combust, and my herb was barely even brown, let alone black.

Also, I find that vaping gets me much higher than smoking once I adjusted to it. The great thing about the nano is you can get those really big hits that hit you hard. And if you want to sip at low temps it will handle that admirably as well.
 

Spocks_Katra

Well-Known Member
new stems look gorgeous, will definitely be picking up a couple soon! I cant keep saying this enough but the nano is the only home vape I think I will ever need. I have a ssv sitting in my closet and I dont think its going anywhere.

I keep my nano on all day, when I need medicine, its just a quick pack and im off. Love the efficiency as well. My other favorite is the mighty and while effects are very similar, the nano is by far more efficient. Could not ask for more!
 

flotntoke

thoroughly vaped
Ordered a new GonG adapter the day before new glowies (glow in the dark silicone) was announced. It came with a glowie! Also added another pack of them (6) to my order. LOVING THEM!! Thanks, Andy! Great idea.

Also, got one of the new EpicVape containers. Very nice!! It's small-ish, but perfect size for sitting next to the nano. O-ring seal, too! Guess it is finally time to start working on that little nano station I've been planning out.
 

CarolKing

Singer of songs and a vapor connoisseur
A very beautiful Enano up above especially decked out with the stand, stems and grips.

It's been pretty hot in my area so we packed up the RV and headed to the beach. It's only a couple hours away. It was hot there too but we had that ocean breeze. I made sure I brought my Enano and a portable vaporizer so I could medicate in our home away from home.

Summer is here in the Pacific NW. Using some Platinum GSC right now in the nano.
 

ataxian

PALE BLUE DOT
Your enano stem looks a little full there, ataxian, haha! Also where is the best place to get single or so keck clips?
I have not enough!
If I pack less it's better however I pack it full but loose.
FLAVOR/EFFECT = OMG!
I spill more than most!
$0.50 at the local SMOKE SHOP!
If you find a online store for heck chips?

PLATIUM OG
LEMON LARRY
GORILLA GLUE

I've mixed 3 in my NANO = UFO
1 in my SOLO = DRY STEM
1 in my EVO = CUSTOM HYDRO-TUBE

Had to have LEMON LARRY after lunch with a UFO and a NANO.

Monday's are like FRIDAY'S!

CIVILIZED!
 
Top Bottom