Cheap High Quality Bubbler

KillaKali831

Active Member
You probably saw it posted earlier two pages back:
http://www.dhgate.com/product/clear-elvis-klein-two-function-glass-bongs/258295257.html
rBVaGlYSHtWAKS-3AACLBlAWtiE687.jpg
Thank you sir
 
KillaKali831,
  • Like
Reactions: SSVUN~YAH

abcd5432

Well-Known Member
There is also a similar piece from stevenlmz.

Generally Steven's pieces are smaller but the same design and they cost a little more.
 
abcd5432,
  • Like
Reactions: SSVUN~YAH

KillaKali831

Active Member
This has to be the BEST fab egg function video I've found on youtube but i cant find the seller he got it from. I've sent him messages but it seems like he wants to keep it to himself. Anyone here know where this version can be found? Search this on youtube....
MotherShip FAB EGG Water Test knock Off in 4k ultra HD
 
KillaKali831,

abcd5432

Well-Known Member
They're supposed to be clone pieces KillaKali.
Even if you order from the EXACT same seller that person did (assuming they even got it from dhgate/china), you wouldn't get the same piece. In general, pieces you get from a seller vary in size and even quality. I'm sure if you order 10 of the same piece, they won't be 10 clones of each other.

Most major sellers list that piece. As you already have experiences from tons of people in this thread from tons of sellers you already know the most recommended sellers....

I spent a lot of time worrying which piece to get and from where, to the point I waited far longer than you did. FAR longer. Since you've posted, I ordered my pieces, and they're now less than a week away and already in the US.

During the time I spent worrying about which piece/seller to order from, I spent far more money on other random little things that I regret as I wish I had my piece months ago, instead of another week away.

Almost any piece you inquired about recently would have been a good pickup to see what you like. You need a starting point though.
 
Last edited:
abcd5432,
  • Like
Reactions: SSVUN~YAH

DVision44

Well-Known Member
Hi there, A few of you have this 4mm Thick piece from glass artist
SsopnbE.jpg


I'm really interested in it but also in some other pieces ..
If the Lotus would fit on that one, I might dedicate it for the lotus and keep my 4" for dabs and get a diffusion pump. If not I'll use it for concentrates.. If any of you have the Lotus, how is the view on the plate ? From distance reported, it should work fine for me.. Wonder about the angle of the view..

I need to know the distance/size shown in black on the picture.
Normally the Lotus cap would be between the 2 marks and so i'm pretty sure it would be a match !
Thanks in advance for your help !
@mrbonsai420 yours is the one from glass-artist shop right ?
If no nail is on the glass joint, can you see the top of the joint while drawing ?

Approx 1cm with the bowl (top line) and 2cm from the body to the joint (bottom line) and yes you can easily see the joint while drawing
 

ataxian

PALE BLUE DOT
Yup ! A waste if it's breaking but I don't really have a piece to carry outside : solid and small. I have one small 4" inch inline, cheap from DHG & now dedicated to concentrate which I even succeed to use the Lotus with, it was outside with a silicone-angled wpa. Just for the sake. I could give a try, and if I don't find much satisfaction for the price just resell it to a friend. The thickness could provide a nice feel I was simply thinking..
I prefer a simple tube with the Lotus : perfect milk, low volume & diffusion. This 7" piece could be a good contender for Lotus in the grass ...
I also thought a dropdown could reduce or retain resin build up from dabs ? Or not really ? (I'm a light user ..)
I'm designing a water pipe and adapters that are unbreakable and don't effect flavor.
4mm I would break it just in the un-boxing.

If you don't break stuff then my comments are not valid.

Sorry I just think glass is not the best material to make stuff.

Some kids from MIT, STANFORD, USC or decent University will use better material than glass.
My custom Glass is 7mm and 9mm thick.
My dhgate stuff is around 5mm.
4mm just seems kind of worthless if you have LIMESTONE floors!

Did not mean to offend!

Life was simple when we had Aluminium Foil and Fast-food straws to DAB.
 
Last edited:

mrbonsai420

Accessory Maker
Accessory Maker
Thats a bad ass setup! What bubbler is that? Looks Like a great portable!

Thanks! That's my travel nail. I actually PiD based one better that I use at home but this one works great too. Plus the Battery setup is fucking awesome!!
The glass is the 7.4" Klein from Glassartist, it's actually the thickest piece of glass from China I own.

http://www.dhgate.com/product/2015-...nches/247499767.html#s1-2-7b;searl|1162361210

Thanks @mrbonsai420

I bought the electric nail.

However GAS consumed me!

10 pieces of glass? (water pipes)

I try not to browse web sites that encourage spending however I gave in!

See what you have done?

You will love it! Now just get a bad ass liger nail and carb cap for it with a SiC insert and you will be in flavor heaven! But baby steps ;) You will love your enail. Which enail did you get?
 

riz0

Well-Known Member
So what's up with SiC? What are the pros cons?
I saw the spec on CCA but nothing to really tell me the real app of SiC v quartz.

That liger nail does look pretty cool though...I need more money...maybe I can cut back on eating...hmm
 
riz0,

mrbonsai420

Accessory Maker
Accessory Maker
So what's up with SiC? What are the pros cons?
I saw the spec on CCA but nothing to really tell me the real app of SiC v quartz.

That liger nail does look pretty cool though...I need more money...maybe I can cut back on eating...hmm

They are both great and both are ideal dab surfaces with awesome flavor and temperature stability. SiC has even better thermal properties and is completely taste inert. It all boils down to some extremely tasty low temp dabs on a super strong surface. I can torch clean my SiC dishes to glowing red hot over and over again and I never notice a difference. Even the highest quality quartz will begin to haze over time.
I can set the enail to a lower temp due to the better conductive properties. If I were only going to use 1 insert it would be the SiC but the Quartz is no slouch either.

SiC inserts for the Liger

F894C446-11FD-48D1-B52D-1E21F6C74179.jpg


D7BBF0FB-7AD0-49AD-B750-49AE8416F1D9.jpg


Quartz inserts, latest version in the center

0AF8724E-8539-43DD-8964-0CE20E3F6139.jpg


9F2630DD-4733-4C81-96DC-C0225F79B50A.jpg
 

DrSteez

Well-Known Member
@ataxian I dab more than most too! I know you have an Evo, if you can stop breaking your nails those are decent to dab out of BUT if you want something less fragile with the BEST flavor and efficiency for dabs you should consider an E-nail with a Titanium nail with SiC insert. The Liger I have makes dabbing so enjoyable! I can't stand the taste of anything besides Quartz, SiC, and Sapphire anymore. You should try one!

With these you have an indestructible Titanium banger (a Must have for your robot fingers!) with a SiC insert that is also extremely durable and has so much better flavor than Ti. You can get a quartz insert too and it also tastes great but a lot less indestructible although It is really hard to break anything CCA makes! it's all super thick and durable.

336845CC-6ED5-42FA-989C-59FAB7CF6CD4.jpg


D7BBF0FB-7AD0-49AD-B750-49AE8416F1D9.jpg
super sick setup! I've almost got the same glass lol.

How would you compare the quartz and the SiC?
I have a quartz dnail at the moment..maybe thinking of change and upgrade :D
Can anyone remember how long it took their pieces to be delivered from DHGate after their tracking was updated and placed into the USPS system?
OH man, i'm still waiting on my package from more than a month ago. any day now
Lately the times to Canada or at least me have been pretty stellar, once it's shipped it's about a week or less to my door.
I should probably mail it to canada, drive up when its there, and come back home. It'd be much faster i bet.
 

little maggie

Well-Known Member
Can anyone remember how long it took their pieces to be delivered from DHGate after their tracking was updated and placed into the USPS system?
My experience has been more seller related. Most recently I bought 2 at the same time: one from glass artist and one from lumin88. The one from lumin88 came a week earlier. The timing has been consistent but different for each seller including Kathy, CCG and others.
 
little maggie,

mrbonsai420

Accessory Maker
Accessory Maker
Ummm guys, what am I looking at here? :rofl: I wish it was 18.8mm, I would buy it for my girl (not really).

http://www.dhgate.com/store/product/2016-new-arrival-colored-glass-pipe-bowl/377493212.html

I know we are all looking for removable mouthpiece bongs, Check this one out. It reminds me of a Greenlight bub with the hollow base. Has anyone used this one?

http://www.dhgate.com/store/product/best-price-two-function-10-quot-atomic-prec/205579720.html


And I know 8 arm percs are "old school" lol. But I love stacking percs and this thing looks like a cool add on bubbler.

[link removed]

Modnote: Link to labeled counterfeit glass removed
 
Last edited:

KillaKali831

Active Member
Too bad I swore off ordering from Steven due to poor quality control and price mark-up.
Do you mind giving an example of your experience with Steven? I've heard nothing but good things about him and everyone I speak to keeps sending me to his store. I'm interested to know what kind of experience do you have purchasing from him. Thank you.
 

weenstoned

Well-Known Member
Do you mind giving an example of your experience with Steven? I've heard nothing but good things about him and everyone I speak to keeps sending me to his store. I'm interested to know what kind of experience do you have purchasing from him. Thank you.

Have ordered multiple pieces from Steven and the only one that doesn't have flaws is the one that initially arrived broken. Might be okay with flaws if he were cheaper than other vendors, but he's actually more expensive generally. You can find the majority of the pieces he sells for 10-20 bucks cheaper if you search around on DHGate. They will claim that these are seconds that did not meet their standard which is an outright lie considering the shit they ship out. I believe that they don't have a factory and are just commissioning them from bigger vendors.

Recently to test this I ordered an FC-Mini from a different vendor which arrived without flaws. It didn't come with a cap despite the title of the ad including WITH CAPS (though I messaged the vendor and was aware of this). Then I ordered 1 cap from Steven and one from a different vendor which is made for honey-buckets. The one from Steven is awful and had a sizable gap near the swing which made it not function great, while the cap from the other vendor works awesome. Once I saw that shitty cap I decided to definitely never order from Steven again.

If these propeller perc pieces actually become available I will wait till they pop up cheaper with a different vendor. Seems like Steven posts a bunch of videos for pieces that never go up for sale.
 

ataxian

PALE BLUE DOT
Last edited by a moderator:

herb forester

Well-Known Member
Don’t attack products or companies. You can post your opinion, and you can criticize, but posts written to offend are not allowed. Warning point issued.
Steven / stevenmlz79 (aka Jane) is a lying scumbag. Don't trust him on any disputes, contact DH Gate customer service right away and deny payment.

On a nicer note, I've had great communication and service from Hfy/Phoenix. Also Glassartist was very responsive and seems promising. And while I haven't dealt with them recently, Yingmin/Sunshinestore (OG vendor here) also had great customer service.
 
herb forester,
Top Bottom