Cheap High Quality Bubbler

mestizo

Well-Known Member
That right there is enough for me to shell out for a Highly Educated one and deal with it. At least flat coils are relatively cheap through some DHGate vendors; those I can be cheap on and buy a couple at at time (to a point).
I was being sarcastic,
I own the vapes I mentioned, but to me there are very few materials out there that I consider unsafe.
I never found out what made grade 2 superior over the other 3 pure grades.
I'll say that if you have the money, and want peace of mind, by all means buy American, no doubt their QA is better than a lot of the stuff on DHGATE.
I personally have never dabbed from a Chinese nail, I have the advantage few have, that is I make my own, but I wouldn't dicurage anyone from buying Chinese, metals are pretty cheap to make something out of an unsafe material, but I'll check it beforehand for peace of mind.
 

galacticdad

Well-Known Member
I was being sarcastic,
I own the vapes I mentioned, but to me there are very few materials out there that I consider unsafe.
I never found out what made grade 2 superior over the other 3 pure grades.
I'll say that if you have the money, and want peace of mind, by all means buy American, no doubt their QA is better than a lot of the stuff on DHGATE.
I personally have never dabbed from a Chinese nail, I have the advantage few have, that is I make my own, but I wouldn't dicurage anyone from buying Chinese, metals are pretty cheap to make something out of an unsafe material, but I'll check it beforehand for peace of mind.

Oh! Well ..shit, haha. I totally didn't pick up on the sarcasm. Now I feel dumb.
 
galacticdad,

Trypsy Summers

Well-Known Member
How does your Chemdawg look when you're done vaping? I got some delivered last night and vaped a few ELB's through my EVO and after only two hits, my bud was super dark brown. Flavorless and not much of a smell to it either.


@AgentofChaos; The Chemdawg looked fine it wasn't dark brown, well not after two hits! Maybe the temperature dial on the EVO was set on a high temp?? Just guessing, but that's the drawback with the EVO, the dial ain't that accurate! So whilst it's alright (for some people) to be guessing/approximating the temperature, truth be known, I prefer to be able to see what the temp is, instead of guessing what its supposed to be.:hmm:
Get me right! You can find an ideal level/mark on the EVO, i.e., 12.0 o clock, 13.00 o clock and so forth, and once you've found the levels that work, then voila!!:tup:

But ''temperature accuracy' is one area where the Volcano Digit, rules supreme!:rockon:

As for the Chemdawg, as with most weed, it depends on the variables, of which, as you know, there are many, especially if you dealing with the 'nieghbourhood supply' as opposed to the 'store-brought' stuff, which usually has a consistent grade about it, or better still, your own thing, which if treated correctly, should be as a minimum, be as good as the store stuff, if not better!:sherlock:

The other thing is, my Chemdawg is; Chemdawg (Greenhouse) x Northern Lights/Master Widow, so there is that variation to consider!!

PS: I forgot to add another important thing about the Hydratube from DHgate, it came with a hydra foot, (the glass thingy that you park your Hydratube on top when not in use during a session) This was included for free. :tup:


Not saying (that), Just saying (this), Without saying (it), ;)
Peace :leaf:
 
Last edited:

ataxian

PALE BLUE DOT
I was being sarcastic,

I personally have never dabbed from a Chinese nail, I have the advantage few have, that is I make my own, but I wouldn't dicurage anyone from buying Chinese, metals are pretty cheap to make something out of an unsafe material, but I'll check it beforehand for peace of mind.
I am sarcastic to the MAX.

We will all die someday.
I have Cheap dhgate stuff & Custom made stuff.

Breaking Glass is what I do!

Vaporizing is CIVILIZED!

Glass makes it smooth!

Where it's made?

I DAB more than most!
Yes I have a cheap low income nail (TI2) from dhgate I like. (I go through a FC-186)
My CERAMIC nail I don't know how to clean? (used it once)
 
Last edited:

mrbonsai420

Accessory Maker
Accessory Maker
I am sarcastic to the MAX.

We will all die someday.
I have Cheap dhgate stuff & Custom made stuff.

Breaking Glass is what I do!

Vaporizing is CIVILIZED!

Glass makes it smooth!

Where it's made?

I DAB more than most!
Yes I have a cheap low income nail (TI2) from dhgate I like. (I go through a FC-186)
My CERAMIC nail I don't know how to clean? (used it once)


@ataxian I dab more than most too! I know you have an Evo, if you can stop breaking your nails those are decent to dab out of BUT if you want something less fragile with the BEST flavor and efficiency for dabs you should consider an E-nail with a Titanium nail with SiC insert. The Liger I have makes dabbing so enjoyable! I can't stand the taste of anything besides Quartz, SiC, and Sapphire anymore. You should try one!

With these you have an indestructible Titanium banger (a Must have for your robot fingers!) with a SiC insert that is also extremely durable and has so much better flavor than Ti. You can get a quartz insert too and it also tastes great but a lot less indestructible although It is really hard to break anything CCA makes! it's all super thick and durable.

336845CC-6ED5-42FA-989C-59FAB7CF6CD4.jpg


D7BBF0FB-7AD0-49AD-B750-49AE8416F1D9.jpg
 
Last edited:

ataxian

PALE BLUE DOT
@ataxian I dab more than most too! I know you have an Evo, if you can stop breaking your nails those are decent to dab out of BUT if you want something less fragile with the BEST flavor and efficiency for dabs you should consider an E-nail with a Titanium nail with SiC insert. The Liger I have makes dabbing so enjoyable! I can't stand the taste of anything besides Quartz, SiC, and Sapphire anymore. You should try one!

With these you have an indestructible Titanium banger (a Must have for your robot fingers!) with a SiC insert that is also extremely durable and has so much better flavor than Ti. You can get a quartz insert too and it also tastes great but a lot less indestructible although It really hard to break anything CCA makes.

336845CC-6ED5-42FA-989C-59FAB7CF6CD4.jpg


D7BBF0FB-7AD0-49AD-B750-49AE8416F1D9.jpg
I like my wax pens however I hate batteries!

I DAB with a torch.
TI2 nails I never break!

The EVO nails through a HYDROTUBE was good flavorwise until I broke all my NAIL'S.
Too bad you can't get EVO NAIL"S in TI? Why Glass?
 
Last edited:

galacticdad

Well-Known Member
@ataxian I dab more than most too! I know you have an Evo, if you can stop breaking your nails those are decent to dab out of BUT if you want something less fragile with the BEST flavor and efficiency for dabs you should consider an E-nail with a Titanium nail with SiC insert. The Liger I have makes dabbing so enjoyable! I can't stand the taste of anything besides Quartz, SiC, and Sapphire anymore. You should try one!

With these you have an indestructible Titanium banger (a Must have for your robot fingers!) with a SiC insert that is also extremely durable and has so much better flavor than Ti. You can get a quartz insert too and it also tastes great but a lot less indestructible although It really hard to break anything CCA makes.

336845CC-6ED5-42FA-989C-59FAB7CF6CD4.jpg


D7BBF0FB-7AD0-49AD-B750-49AE8416F1D9.jpg

I didn't realize they were more affordable than I thought! $195 for a 20mm banger and a SiC dish? I don't have to buy a flat coil? That's got me sold!
 

mrbonsai420

Accessory Maker
Accessory Maker
I didn't realize they were more affordable than I thought! $195 for a 20mm banger and a SiC dish? I don't have to buy a flat coil? That's got me sold!

Don't forget to use our discount code for 10% off FUCKCOMBUSTION . I love these things, I now have 3 with a lots of inserts and carb cap variations. I use the 16mm on the road and the 20mm at home but they both rock!

This setup is SO GOOD that I even had to have one for camping lol.
This is my battery powered enail setup with the 16mm and sic dish below.

F65474D7-9D68-44AB-80DE-54641FEA8556.jpg
 

ataxian

PALE BLUE DOT
Don't forget to use our discount code for 10% off FUCKCOMBUSTION . I love these things, I now have 3 with a lots of inserts and carb cap variations. I use the 16mm on the road and the 20mm at home but they both rock!

This setup is SO GOOD that I even had to have one for camping lol.
This is my battery powered enail setup with the 16mm and sic dish below.

F65474D7-9D68-44AB-80DE-54641FEA8556.jpg
You live better than me it looks like?
FC186 DABBING before SWIM!
jlmdYai.jpg
 

galacticdad

Well-Known Member
Don't forget to use our discount code for 10% off FUCKCOMBUSTION . I love these things, I now have 3 with a lots of inserts and carb cap variations. I use the 16mm on the road and the 20mm at home but they both rock!

This setup is SO GOOD that I even had to have one for camping lol.
This is my battery powered enail setup with the 16mm and sic dish below.

F65474D7-9D68-44AB-80DE-54641FEA8556.jpg

Solid! Thanks so much!
 

ataxian

PALE BLUE DOT
@ataxian you look like you live pretty good..lol

One time I was Boating on this Long Yacht.
I said to the Captain, "Don't you wish you had a longer yacht as John Wayne's Yacht was next to us"?

He replied, "Their are even more people who don't even own one"?

Moral of the story:
Human want's are insatiable!

We always want more!

420 time!
Happy to celebrate!
 

Dramma Lamma

Looks like a job for!
This discussion of materials has me interested; what other materials are people comfortable using from China/dhgate?
Storage: silicone?
Dab surface: ceramic? Quartz?

Glass as a vapor path, like a bong ETC.

Perhaps some cheap electronic components such as a resistor ETC.

String or other cloth stuff.

That is about all I can trust straight from china.

A dab surface or anything that chemically/thermally interacts with my product? NOPE never period.

Anything that gets hot or requires any sort of professional QC (like a battery) I would personally WAY WAY WAY rather buy from a more reputable vendor who I can trust to QC.
 
Last edited:
Dramma Lamma,
... has anyone purchased a good drop down from DHGate?

Like one that will sit lower than the joint?
I've tried a couple different ones but they are more of an extender than a drop down...

... or does anyone know where i can find a drop down that sits lower than the joint? (think that makes sense :hmm:)

IMO you should just get an American brand dropdown I've used a nexus and it was solid and perfectly straight the boro syndicate ones on aqualab look pretty nice too. I've seen probably 20 dhgate dropdowns from a bunch of different sellers and they've all had joint wobble or they were crooked.
 
thedutchmaster,

deltr0n

Big Daddy Oil
Glass as a vapor path, like a bong ETC.

Perhaps some cheap electronic components such as a resistor ETC.

String or other cloth stuff.

That is about all I can trust straight from china.

A dab surface or anything that chemically/thermally interacts with my product? NOPE never period.

Anything that gets hot or requires any sort of professional QC (like a battery) I would personally WAY WAY WAY rather buy from a more reputable vendor who I can trust to QC.
I'm a chemist, I have a little bit of hard time imagining a money saving additive they could add to Quartz at least, and I think a lot of others here feel together
 

Dramma Lamma

Looks like a job for!
I'm a chemist, I have a little bit of hard time imagining a money saving additive they could add to Quartz at least, and I think a lot of others here feel together

You are correct on quartz it certainly is not likely to be all that impure.

Admittedly I also have quartz that likely was blown in china.

Tho I am not really dabbing currently.
 
Last edited:
Dramma Lamma,

grokit

well-worn member
These are great! I balked a little, since my roommate was apparently not sold on Chinese titanium, thinking it might not be grade 2, or even titanium at all.. I thought this was a little too much of a tin-foil hat idea for me.. and in these type of nails, you're only really interacting with the quartz dish, so what does it matter? Thoughts on this?
Most american vendors are the same exact quality from china, some are re-branded some not. You're dabbing off the glass not the ti. Btw the dishes are interchangeable on the two models I posted.
 

KillaKali831

Active Member
Don't forget to use our discount code for 10% off FUCKCOMBUSTION . I love these things, I now have 3 with a lots of inserts and carb cap variations. I use the 16mm on the road and the 20mm at home but they both rock!

This setup is SO GOOD that I even had to have one for camping lol.
This is my battery powered enail setup with the 16mm and sic dish below.

F65474D7-9D68-44AB-80DE-54641FEA8556.jpg
Thats a bad ass setup! What bubbler is that? Looks Like a great portable!
 
Last edited by a moderator:
KillaKali831,
  • Like
Reactions: ataxian

Bvapst

Well-Known Member
Hi there, A few of you have this 4mm Thick piece from glass artist
SsopnbE.jpg


I'm really interested in it but also in some other pieces ..
If the Lotus would fit on that one, I might dedicate it for the lotus and keep my 4" for dabs and get a diffusion pump. If not I'll use it for concentrates.. If any of you have the Lotus, how is the view on the plate ? From distance reported, it should work fine for me.. Wonder about the angle of the view..

I need to know the distance/size shown in black on the picture.
Normally the Lotus cap would be between the 2 marks and so i'm pretty sure it would be a match !
Thanks in advance for your help !
@mrbonsai420 yours is the one from glass-artist shop right ?
If no nail is on the glass joint, can you see the top of the joint while drawing ?
 

ataxian

PALE BLUE DOT
Hi there, A few of you have this 4mm Thick piece from glass artist
SsopnbE.jpg


I'm really interested in it but also in some other pieces ..
If the Lotus would fit on that one, I might dedicate it for the lotus and keep my 4" for dabs and get a diffusion pump. If not I'll use it for concentrates.. If any of you have the Lotus, how is the view on the plate ? From distance reported, it should work fine for me.. Wonder about the angle of the view..

I need to know the distance/size shown in black on the picture.
Normally the Lotus cap would be between the 2 marks and so i'm pretty sure it would be a match !
Thanks in advance for your help !
@mrbonsai420 yours is the one from glass-artist shop right ?
If no nail is on the glass joint, can you see the top of the joint while drawing ?
4mm thickness?
What a waste of glass! (thin)

I use a bigger can for my LOTUS.
At least you consult with the @mrbonsai420

We had this surf spot called the Bonsai Pipeline.
It's a break in HAWAII we surfed as young guns!
 

Bvapst

Well-Known Member
4mm thickness?
What a waste of glass! (thin)
I use a bigger can for my LOTUS.

Yup ! A waste if it's breaking but I don't really have a piece to carry outside : solid and small. I have one small 4" inch inline, cheap from DHG & now dedicated to concentrate which I even succeed to use the Lotus with, it was outside with a silicone-angled wpa. Just for the sake. I could give a try, and if I don't find much satisfaction for the price just resell it to a friend. The thickness could provide a nice feel I was simply thinking..
I prefer a simple tube with the Lotus : perfect milk, low volume & diffusion. This 7" piece could be a good contender for Lotus in the grass ...
I also thought a dropdown could reduce or retain resin build up from dabs ? Or not really ? (I'm a light user ..)
 
Top Bottom