Vaporfection - the AquaVape Inline Vapor Cooler
- Thread starter sam urai
- Start date
In The Clouds
Member
Plant said:
Very cool! I don't know if I'd ever do it though, that would mean bringing my aqua vape with me too.
No thanks
Homes
Well-Known Member
masbanji92 said:If a dumb friend where to cough or blow into it(yes non vaporists sometimes do that when expierencing the DBV) would water shoot down the whip and into the vape? Haha sounds dumb but I could see that happening to someone with this.
They would have to blow in pretty hard in order to do that, not that it's not possible but you it has to be a good breath of air.
paracaps
Vape Enthusiast
I just had the pleasure to spark up my vap (extreme Q) with the AquaVape Inline Vapor cooler for the first time and I was very pleased. The vap air was cool and easy on the throat which made it a very enjoyable experience.
Is it possible to remove all the excess of water inside the vapor cooler without a small air compressor once your done with it? I tried forcing all the excess of water inside by forcefully breathing out but I wasn't able get it all out.
Is it possible to remove all the excess of water inside the vapor cooler without a small air compressor once your done with it? I tried forcing all the excess of water inside by forcefully breathing out but I wasn't able get it all out.
FLskwat
VAPOLITICS!
Just ordered this little jewel for my SSV, from vaporstore!
I think this can be adapted on almost all the vapos: it will work with my NO2 for sure (tubing will fit), and I could even see it work with my Cano's solid valve: take out the black end of the mouthpiece, put a small tubing between the aluminium tube of the valve & the Aquavape...and there you go, with a moisterizer for Cano...
...right?
I'll report as soon as I receive it! I hope it won't be too long before it crosses the Atlantic Ocean!!!
I think this can be adapted on almost all the vapos: it will work with my NO2 for sure (tubing will fit), and I could even see it work with my Cano's solid valve: take out the black end of the mouthpiece, put a small tubing between the aluminium tube of the valve & the Aquavape...and there you go, with a moisterizer for Cano...
...right?I'll report as soon as I receive it! I hope it won't be too long before it crosses the Atlantic Ocean!!!
collegerower
Well-Known Member
pinoy said:
I would like to know this also!
FLskwat
VAPOLITICS!
Hh...my little precious was waiting for me on my living room sofa!
Thx to VaporStore for this very quick delivery, perfect packaging & great customer service!
It looks so nice...I'll test it in depth and report soon.
Hmmm it's got AquaVape logo painted on it and I'm not sure I really like that... I'm sure a little acetone on the painting will act fast & neat on it. Do you all confirm a little acetone on the painted logo will clear it without damaging the glass?
EDIT: I received a mail from VaporStore confirming I could do so with the painted logo. And for the cleaning part, some indications in the same mail:
The best way to clean it in my personal opinion is to fill the Aqua Vape with cleaning solution (preferably one with an abrasive material for scrubbing away all the resin and anything stuck to the walls) and shake it up until everything inside is clean. The easiest way to fill your Aqua Vape with anything is to use it like a straw. Put the bottom end into your liquid of choice, suck into it like a straw and you'll be able to fill the Aqua Vape until the bottom of the top inner glass piece. If anymore is sucked into the Aqua Vape, this will act just as a straw will and go straight into your mouth, so do not overfill if using this method and using a cleaning solution. If you try and just top fill this in your faucet, you will only be able to fill just the bottom portion of the Aqua Vape (not even near capacity) and water will just go in one end and out the other as regulated by the internal glass structure. You definitely don't need a pump to clean this unit.
Thx to VaporStore for this very quick delivery, perfect packaging & great customer service!
It looks so nice...I'll test it in depth and report soon.
Hmmm it's got AquaVape logo painted on it and I'm not sure I really like that... I'm sure a little acetone on the painting will act fast & neat on it. Do you all confirm a little acetone on the painted logo will clear it without damaging the glass?
EDIT: I received a mail from VaporStore confirming I could do so with the painted logo. And for the cleaning part, some indications in the same mail:
The best way to clean it in my personal opinion is to fill the Aqua Vape with cleaning solution (preferably one with an abrasive material for scrubbing away all the resin and anything stuck to the walls) and shake it up until everything inside is clean. The easiest way to fill your Aqua Vape with anything is to use it like a straw. Put the bottom end into your liquid of choice, suck into it like a straw and you'll be able to fill the Aqua Vape until the bottom of the top inner glass piece. If anymore is sucked into the Aqua Vape, this will act just as a straw will and go straight into your mouth, so do not overfill if using this method and using a cleaning solution. If you try and just top fill this in your faucet, you will only be able to fill just the bottom portion of the Aqua Vape (not even near capacity) and water will just go in one end and out the other as regulated by the internal glass structure. You definitely don't need a pump to clean this unit.
Bluntcrush
Director of Vapor Research Labs™
I just got mine last night! 
I am getting ready to put it through some extensive testing with my EQ today!!! Of course you can expect a full report! So far it seems pretty versatile. It looks like it would work with anything you can attach a whip to. The video on Vaporstore shows the user blow out a huge cloud! Looks win!!!
I am getting ready to put it through some extensive testing with my EQ today!!! Of course you can expect a full report! So far it seems pretty versatile. It looks like it would work with anything you can attach a whip to. The video on Vaporstore shows the user blow out a huge cloud! Looks win!!!
2clicker
Observer
sunsett70 said:
ive had mine (w/out logo
) for a few months now and still absolutely love this lil piececleaning is easy... in fact when used with a whip application you really dont even need ISO to clean it. since it is so far away from the bowl you really dont get any vapor buildup inside of it. really all that is needed is a hot water rinse every other day or so. mine looks brand new when i run hot water through it, shake it, and then blow the water out. usually ill do this a few times though and then fill to desired level with cold water.
as for getting all the water out... you can get pretty close, but youll never get it all out unless using an air compressor or a aerosol can of compressed air (keyboard cleaners). in my application i never need to get all of the water out because mine stays at home and is being used every day. because of this i always have water in it. if you need to get most to all of it out i would suggest blowing it out. then when that residual water is still left in there experiment with lighter and stronger breaths. you can really work most of the water out by doing this i have found. just takes some experimentation. blowing on it full blast will only shoot the residual water up into the top of the perc dome and you will see it spinning inside there.
if you absolutely need all of it out you have 2 options. use a compressor or get as much out as possible and let the rest evap.
this little guy is highly recommended. im considering buying another to keep in my vehicle at all times.
FLskwat
VAPOLITICS!
Cool doing that review on the cleaning part 2clicker...as my vapetto decaf capsule is actually hitting me quite hard 
I confirm all you said... I've been playing a lot with this little jewel yesterday (vaping, filling, unfilling, cleaning) and this evening.
Man: fully satisfied, even more... I've been able to adapt it on my 3 vapes (yes even on the cano with a little tubing MOD ). I'll do the logo thing this WE!
One question for 2click. I know I'm a heavy hitter and like heavy pulls but, on my ssv, I've got the impression you cannot put much water in that buddy... I feel if I put more water then 5-8 mm above the perc holes level, I can get, on rare occasions, some water drops touching my lips...
So, 2Click, at what average water level do you usually use yours?
Other then that, I love this thing!
I confirm all you said... I've been playing a lot with this little jewel yesterday (vaping, filling, unfilling, cleaning) and this evening.Man: fully satisfied, even more... I've been able to adapt it on my 3 vapes (yes even on the cano with a little tubing MOD
). I'll do the logo thing this WE!One question for 2click. I know I'm a heavy hitter and like heavy pulls but, on my ssv, I've got the impression you cannot put much water in that buddy... I feel if I put more water then 5-8 mm above the perc holes level, I can get, on rare occasions, some water drops touching my lips...
So, 2Click, at what average water level do you usually use yours?
Other then that, I love this thing!
2clicker
Observer
FLskwat said:Cool doing that review on the cleaning part 2clicker? I confirm all you said... I've been playing a lot with this little jewel yesterday and this evening.
Man: fully satisfied, even more... I've been able to adapt it on my 3 vapes (yes even on the cano with a little tubing MOD
One question for 2click. I know I'm a heavy hitter and like heavy pulls but I've got the impression you cannot put much water in that buddy... I feel if I put more water then 5 mm above the perc holes level, I can get, on rare occasions, some water drops touching my lips...
So, 2Click, at what average water level do you usually use yours?
Other then that, I love this thing!
its funny you ask because i have recently increased the amount i put in it
before i was putting in around your 5mm level just so not to get the up splash. ive found however that after adding another 2-3mm, that up splash isnt really a problem for me after all. it rarely happens... usually only when pulling harder than needed.
i will usually pull from it steadily, but not fast until i start to get a nice decent hit and its fully chalked. then i pull the wand out and clear the whip.
also mine gets rinsed every other day so the water is never anywhere close to being nasty. in fact vapor water can be quite pleasing to smell and even taste. sounds crazy i know.
Bluntcrush
Director of Vapor Research Labs™
Yep! Some rigorous testing has been completed both with the EQ and the Iolite portable. This thing is very nice!!! Great flavor, coolness, and easy drawing too! It also can rest easily on a table without spilling. I just coil my whip around it, and it's fine!
Really nice effects brought out of the flowers with the Q! It was like I had a nice TBreak (Only I hadn't ) I got some nice body rushes and a really nice heady stone!!! I think you can get a much bigger hit without noticing it, because it's so cool. I just used about 1 foot of whip (us plastics flexible) and attached to my Iolite mouth piece. Coincidentally, the little white tip that comes with the Iolite fit snugly on the end of the whip an made a nice little tip!
Plus the little buddy sings to you while you use it!!! Highly recommended for my fellow vaporists!!!
This thing is very nice!!! Great flavor, coolness, and easy drawing too! It also can rest easily on a table without spilling. I just coil my whip around it, and it's fine! Really nice effects brought out of the flowers with the Q! It was like I had a nice TBreak (Only I hadn't
) I got some nice body rushes and a really nice heady stone!!! I think you can get a much bigger hit without noticing it, because it's so cool. I just used about 1 foot of whip (us plastics flexible) and attached to my Iolite mouth piece. Coincidentally, the little white tip that comes with the Iolite fit snugly on the end of the whip an made a nice little tip! Plus the little buddy sings to you while you use it!!!
Highly recommended for my fellow vaporists!!!
. been looking for a 'small' bong like thing since i get dry mouth when vaping and liquid sips just seem to help a bit. thanks for all the reports and comments. vape on!
Bluntcrush
Director of Vapor Research Labs™
Does anyone know an easy way to change the water once your whip is attached. I had no problem using this until it was time to change the water this morning so I warmed up the whip where it was connected to the bottom of the AV. It popped right off. I blew out all of the old water and then sucked in some fresh. BUT GETTING THE WHIP BACK ON THE GLASS NOZZLE EVEN WITH WARMING IT A LITTLE TOOK FOREVER!!!! Anyone with some ingenious tips?
HELP!
***got an email from Vaporfection that basically said no need to remove the whip once attached and that you could just suck/ blow water thru that. Does anyone foresee a problem with that? My concern is how long it will take the whip to dry and whether or not that will be a breeding ground for bacteria?
I still love this thing soooo much!
HELP!
***got an email from Vaporfection that basically said no need to remove the whip once attached and that you could just suck/ blow water thru that. Does anyone foresee a problem with that? My concern is how long it will take the whip to dry and whether or not that will be a breeding ground for bacteria?
I still love this thing soooo much!
Homes
Well-Known Member
Bluntcrush said:Does anyone know an easy way to change the water once your whip is attached. I had no problem using this until it was time to change the water this morning so I warmed up the whip where it was connected to the bottom of the AV. It popped right off. I blew out all of the old water and then sucked in some fresh. BUT GETTING THE WHIP BACK ON THE GLASS NOZZLE EVEN WITH WARMING IT A LITTLE TOOK FOREVER!!!! Anyone with some ingenious tips?
HELP!
***got an email from Vaporfection that basically said no need to remove the whip once attached and that you could just suck/ blow water thru that. Does anyone foresee a problem with that? My concern is how long it will take the whip to dry and whether or not that will be a breeding ground for bacteria?
I still love this thing soooo much!
What do you mean that getting the whip back on the glass nozzle took forever? Do you mean that it kept slipping off after you refilled the AquaVape with water? If so you can just dry the glass nozzle with your shirt, and dry the inside of the whip your about to attach. There should be no moisture on the glass nozzle or on the inside of your whip so you can get a nice tight seal.
Btw been using the AquaVape for a while now, use it everyday, and I just don't vape without it. Once you've been using it for a while you are kinda spoiled to vaping only with water lol. I love it.
Bluntcrush
Director of Vapor Research Labs™
I guess I got my Aqua Vape figured out. I put a tiny slit at the very mouth of the US Plastics flexible whip. Now I can slide it on and off my EQ elbow attachment easily. Last night I attached a short hose to the glass mouth piece of the EQ bag after I filled a bag with thick C99 vapor. Then I attached that little hose to the Aquavape and had water filtered bags!!! Man, were they sweet! Valentine's Day was an extra special one at our place!
Next, I want to rig up a way to blow EQ vapor through water and into a bag, so that the vapor is filtered upon entry into the bag. The fun possibilities are endless!!! Anyone have any ideas for this? Another cool way would be able to use an elbow attachment with a "T" joint and blow up 2 bags simultaneously for group situations. 
Man, were they sweet! Valentine's Day was an extra special one at our place! Next, I want to rig up a way to blow EQ vapor through water and into a bag, so that the vapor is filtered upon entry into the bag. The fun possibilities are endless!!!
Anyone have any ideas for this? Another cool way would be able to use an elbow attachment with a "T" joint and blow up 2 bags simultaneously for group situations. 
Bluntcrush
Director of Vapor Research Labs™
Kaptan said:
I noticed this post a while ago, but I still have not tried it. I will report results as soon as I am able...