Discontinued Vapir Rise Vaporizer

Earthtuner

Well-Known Member
A technique that, I have used with success, is dropping 4 or 5 drops of lavender,rosemary,chamomile, or some other healthy[not cedar or cinnamon] essential oil, into the oil chamber.Run the unit at 3 or 4 fan setting[340 degrees F] and partially fill balloons and hoses with this essential oil vapor.It removes the dank scent from bags and hoses, and makes equipment smell nice.The Vapir Rise has a lot of screens and things to clog, so after I remove the screens and wipe with ISO and brush out the crud by the wip adapter.I then smear a tiny bit of rubber, silicone, friendly grease.[made for lubing flashlight seals] on the O rings that seal the top unit.
 
Earthtuner,
  • Like
Reactions: Zheka

ginolicious

Well-Known Member
So I have been googling replacement parts for my rise 2.0. The herb chamber is getting old after a year. Screen is almost falling off the herb chamber. Found an online store based out of Edmonton called Jupiter. If you need replacement parts, check that out.
 
ginolicious,

Earthtuner

Well-Known Member
So I have been googling replacement parts for my rise 2.0. The herb chamber is getting old after a year. Screen is almost falling off the herb chamber. Found an online store based out of Edmonton called Jupiter. If you need replacement parts, check that out.
I bought two extra ones ,from Toronto Vaporizer, for nine dollars Canadian each.The new chambers are redesigned with a different screen cover, and the bottom of the chamber is different.The new system is better and stronger,in my opinion.
 
Earthtuner,

ginolicious

Well-Known Member
I bought two extra ones ,from Toronto Vaporizer, for nine dollars Canadian each.The new chambers are redesigned with a different screen cover, and the bottom of the chamber is different.The new system is better and stronger,in my opinion.

Is the new chamber the one where the bottom screen screws onto the bottom of the chamber oppose to being one piece?

I would buy from Toronto Vaporizer. But they kill you on shipping for small pieces. Bought my vape from them. Not bad. Bought a replacement plunger months later, paid $30 shipped. I was pissed.
 
ginolicious,

George1151

Well-Known Member
I would buy from Toronto Vaporizer. But they kill you on shipping for small pieces. Bought my vape from them. Not bad. Bought a replacement plunger months later, paid $30 shipped. I was pissed.

I want to get the Haze cans from Toronto Vaporizer but the shipping is $9 for a $15 item. No way Jose.
 
George1151,

Crussell27

Fellow vapor brother
Got me one of these today. Extremely happy with it. I just whip with it at the moment. Just need to get the bag valve. Then I can get turkey bags.
 
Crussell27,

George1151

Well-Known Member
I have the valve and the turkey bags but I prefer the Vapir bags that you just stick the whip into. Much easier to use. Vapir Rise does not get enough love, for the price it is pretty amazing.
 

Ronp

Well-Known Member
I get all my parts from www.Vapornation.com. I bought the Rise from them too, and registered with Vapir. They replaced the chamber and a few other parts for me. No cost.
 
Ronp,

ginolicious

Well-Known Member
It's a very sad day for me. The Vapir rise weed chamber is now dunzo. The screen totally came off the herb chamber. An email went out to Vapir just now. Hopefully they send me a new one no questions asked. If not. I'm smashing this thing into pieces and posting a YouTube video about it.
 
ginolicious,

Ronp

Well-Known Member
The same thing happened to mine, except it didn't come off completly. I was wondering if, you can just take that screen put it on the inside of the chamber, and use it like normal? I didn't get a quick response when I emailed Vapir. I called them, and they were very responsive.
 
Ronp,

ginolicious

Well-Known Member
I'm hoping this is covered under warranty. Slightly angry.

@Ronp I was just like yours. Slightly coming off. Until last night it totally popped off.
 
ginolicious,

ginolicious

Well-Known Member
Do you think it'll work if I put the screen inside?

It works. I did that last night. But be careful. Weed can fall out and will if not careful. Also it's a bitch when you dump the chamber hot. I collect my ABV and the screen falls out when I empty then have to wait a minute for it to cool down so I can pick it up and place it back in.
 
ginolicious,

Crussell27

Fellow vapor brother
Love the simplicity of this machine. Uses the same charging cord as my ps3. Also, it looks like the version 1 bowl has replaceable screens.
 

ginolicious

Well-Known Member
I can confirm that when the bottom screen totally comes apart from the herb chamber, vapor quality as well as production starts to deteriate. Last couple of days with this unit have not been enjoyable because of this.

Yes I micro dose. But when the screen was attached to the chamber production was a lot better than what it is now.
 
ginolicious,

Crussell27

Fellow vapor brother
I can confirm that when the bottom screen totally comes apart from the herb chamber, vapor quality as well as production starts to deteriate. Last couple of days with this unit have not been enjoyable because of this.

Yes I micro dose. But when the screen was attached to the chamber production was a lot better than what it is now.
Sorry to hear that, man. I'd recommend getting a whole new bowl setup.
 

Crussell27

Fellow vapor brother
Btw, guys. Last night I filled 5 bags off of one bowl. I also take the ABV from other vapes that I have and I run them at 420 into the bag. Not the tastiest, but you can really use everything in the plant that way. I'm cheap. Haha
 
Crussell27,
  • Like
Reactions: Vitolo

Ronp

Well-Known Member
Btw, guys. Last night I filled 5 bags off of one bowl. I also take the ABV from other vapes that I have and I run them at 420 into the bag. Not the tastiest, but you can really use everything in the plant that way. I'm cheap. Haha
I do the same thing with my ABV.
 

draakjeszijnlief

Well-Known Member
I can confirm that when the bottom screen totally comes apart from the herb chamber, vapor quality as well as production starts to deteriate. Last couple of days with this unit have not been enjoyable because of this.

Yes I micro dose. But when the screen was attached to the chamber production was a lot better than what it is now.

Hi Gino, hope you are well :)
Are you saying your herb chamber broke?
Or did you order the newest one (with the screw on screen)
and it doesn't work as proper as the old ones?
I am highly considering buying a new herb chamber and plunger thingie.
Mine is so dirty by now (hopps did that...) and i cant seem to clean it
properly.

I also want to know if they come with concentrate pads now.
Cant seem to buy them separate. (in my country at least.)
 
draakjeszijnlief,
Top Bottom