Vaponly

What, Me Worry?
I have seen in videos people load the stem sideways so the material doesn't fall out.
Is there an optimal grind size?

It is usually not a problem, but you could always top the load with another basket screen to insure it stays where you want it. Just be careful not to compress the load when pushing the screen in, as that might create too much draw restriction.

For an extra treat "paint" the bottom of the second screen with runny concentrate before pushing it into the gong on top of the load. The concentrate will melt off the screen and onto the flowers below after the first draw.
 
Last edited:

ataxian

PALE BLUE DOT
ive been hearing a lot of good things about God's Gift!
Be careful it's cured right?
A lot of people dry it out too much.

62% moisture is a reasonable target to aim for.

GDP; BLACKWATER; MENDECINO PURPS; GODS GIFT I'll always try and have available!

SNOOP DOGGY PURPLE KUSH is the best however never available?

NANO adjustment for a new cure?

Sacks of GOD"S GIFT is very civilized!
Kind of grape flavor however effect wise like laughing gas!
It will knock you out as well?
 
Last edited:

CarolKing

Singer of songs and a vapor connoisseur
@flotntoke you cracked me up. "Indica hibernation mode". I love that! I hate to rub it in but it's spring time in the Pacific N.W with 68 degree weather and sunshine. It's suppose to rain tonight and cool down.

When I see Gods Gift I pick it up. I don't always see it here in my area. It's one of my fav. A good night time strain a heavy indica - perfect for indica hibernation mode.

Whatever the strain the Enano delivers.

Edit
Some I.E Kush in the Enano. Whatever the hell I.E stands for. I posed that question in strain info thread. It's a nice strain, was looking for some new strains to try.
 
Last edited:

Vapenvy

Indie vaper
If you are in Europe make sure you have at least a 100W inverter, and even then, be aware that these can affect heat output. I'm stateside, this is just an observation from previous posters.

Close, but a minimum of 50 watts is all that's required but many say 100 for a large margin of error. Mine is 50 watts. Has been on for months and is only slightly warm. I would ensure that it is one that is designed to stay on all the time. The cheaper ones aren't designed for this and well, the nano has a habit of making you forget to switch off, or not want to...
 

ataxian

PALE BLUE DOT
Nano heater are 25Watts so 50Watts is already a margin taken.
I wasn't going to post anymore however I don't like false comments.

35 watts is my NANO.
24/7 it's on and ready to medicate!

@CarolKing I like to try new strains however some make me sick?

Headaches I don't care for!
Paranoia freaks me out!

Some CANNABIS consumers don't experience the same reactions?

OK I'm a picky S.O.B. I can't help it!

I get ounces at a time.
Maybe a Gram first would make more sense?
 
Last edited:

Vapodudule

Well-Known Member
Please check again @ataxian i always measured 25W, just rechecked now.

A bit an elephant for figures too sorry. May be you have another version than me.

Maybe Andy will tell us.
 
Last edited:

CarolKing

Singer of songs and a vapor connoisseur
The Enano itself will draw 15 watts. I looked it up on Epicvape's website. The temperature I read will go as high as 550 degrees. Most of us will be vaporizing way lower than that.
 
Last edited:
CarolKing,
  • Like
Reactions: ataxian

Jimmer144

Sargeant REG
After a lot of fiddling around i think i got my ideal temp settings pretty well ironed out. For most strains ive had level 6.0 works perfectly for daytime sessions, it is really smooth at that level, hardly can tell i'm inhaling any vapor, but on exhale i can get some really nice cloud production. I usually get 2 big draws per bowl, sometimes i need a small 3rd draw to finish everything off. As for my nights i like to vape anywhere between 6.4-6.9. I love that i can just adjust my screen and move it up a lil if i need more heat rather than having turn the dial up for just one hit.
 

CrimsonKing

The Destroyer Of Worlds
:cry: and *edit* another shell* bites the dust, split in the same spot too.
4Stjbkq.png

LqTZFXU.png


2 in about three months either I have terrible luck or there was an issue with the cherry wood stock at Epic @nondarb was in the same original batch as me and had one split too. This is getting frustrating seeing so many of you that have tanks (survived multiple drops, chipped and dinged) and still working great while mine had never so much as tipped over and it has split twice :bang:. Oh well, back to the LSV for now.
 
Last edited:

throwawaytre3s

Well-Known Member
:cry: and it bites the dust again, split in the same spot too.
4Stjbkq.png

LqTZFXU.png


2 in about three months either I have terrible luck or there was an issue with the cherry wood stock at Epic @nondarb was in the same original batch as me and had one split too. This is getting frustrating seeing so many of you that have tanks (survived multiple drops, chipped and dinged) and still working great while mine had never so much as tipped over and it has split twice :bang:. Oh well, back to the LSV for now.

Out of curiosity, what happens when an enano splits like that? Why is it rendered unusable? It looks purely cosmetic to me.
 
Out of curiosity, what happens when an enano splits like that? Why is it rendered unusable? It looks purely cosmetic to me.

When he says bites the dust he means back to Andy. Its only been a couple months, these are warranty issues.
cherry wood

Mine was maple! Maybe their current blank supplier is fibbing about their curing process or something. Mines still not back, but there was a slight delay on my part.
 
nondarb,

CrimsonKing

The Destroyer Of Worlds
Out of curiosity, what happens when an enano splits like that? Why is it rendered unusable? It looks purely cosmetic to me.

MOSTLY cosmetic, I realized the last one was split when I cut my finger on it, but still very usable yes. I just meant the second shell had bit the dust not the entire unit.

Mine was maple! Maybe their current blank supplier is fibbing about their curing process or something. Mines still not back, but there was a slight delay on my part.

My bad, maple, timing still seems weird. I wonder if it has anything to do with the power cables, they were delayed because of bad ones, eh probably just more of the standard bad luck on my part.
 
Last edited:
CrimsonKing,
  • Like
Reactions: nondarb

hafalump

Well-Known Member
My broinlaw has a split one for at least a year, Andy totally made good on a return, but it he likes it, and it works absolutely fine, also it has character, like a Harry Potter scar. It is cherry wood, with the cracking on the plug side. So if the crack is cool I'd keep her. I'll get some pics next time we meet.
 
hafalump,

Sand

Flirting with Combustion
MOSTLY cosmetic, I realized the last one was split when I cut my finger on it, but still very usable yes. I just meant the second shell had bit the dust not the entire unit.



My bad, maple, timing still seems weird. I wonder if it has anything to do with the power cables, they were delayed because of bad ones, eh probably just more of the standard bad luck on my part.
I think that the AC power plug may just be a weak point because of its rectangular shape. I'm not a wood expert but I think round(ed) holes are less prone to cracking. Some of it seems to also come down to wood quality/processing/luck.
 
Sand,

hweezi

formally cwheezy
Hemp fibre and the E-nano are a match made in heaven.

THIS is how you enjoy concentrates with a E-nano. Its so easy too, you just roll up a ball of it stick it in your stem/gong and then drop your full melt on it. I'd say the crafty pads taste better, but the hemp fibre taste better than the pad does when it's pooched. I like how damn efficient it is though, its never drips past the screen and just soaks completely into the fibre.
 

ataxian

PALE BLUE DOT
:cry: and *edit* another shell* bites the dust, split in the same spot too.
4Stjbkq.png

LqTZFXU.png


2 in about three months either I have terrible luck or there was an issue with the cherry wood stock at Epic @nondarb was in the same original batch as me and had one split too. This is getting frustrating seeing so many of you that have tanks (survived multiple drops, chipped and dinged) and still working great while mine had never so much as tipped over and it has split twice :bang:. Oh well, back to the LSV for now.
Plastic tubing instead of wood!

Be happy and explore?
 
ataxian,
  • Like
Reactions: Vaponly
Top Bottom