Customized vape setups

Manulmalin

Member
I've made my own water pipe with an old bong and some medical tubing :



it works well but you have to hit hard on it.
 
Manulmalin,

VapoRoor

DAB-a-DAB I'll dooooo
MANULMALIN, is that tubing fitted over your metal bowl, or is it directly where the downstem would go?

The matrix tube that came with the no2 works very nicely in my bubbler, but im still lookin for something called an "inline perc?"
something where i Can fit the tubing directly into it and turn my no2 hits into water cooled hits.
 
VapoRoor,

psyshaman

Vapor Viking
Very nice JDSupeme! Did you just snap that one up from aqualabtech? I am waiting for the other worked Ben Wilson bubbler that was listed there to arrive. How do you like it?
 
psyshaman,

JDSupreme

Head of Pot
psyshaman said:
Very nice JDSupeme! Did you just snap that one up from aqualabtech? I am waiting for the other worked Ben Wilson bubbler that was listed there to arrive. How do you like it?

I love it! Super smooth and classy :) I got the last worked one off there that wasn't an $800 collab

I was debating between the one you bought and mine. Then that one went out of stock so you made my decision easier. The one I got was the first one I clicked on when I started looking on ALT. Love at first site! I swear I looked at every piece of glass under $500 on the web but kept going back to my BW.

Edit: Also, so I have an awesome worked glass screen slide for this that I'm not using. Shame cause its a beauty. Maybe one day ill get a vape that will work with an existing slide bowl...

Edit again: Threw my VG top on the slide. Didn't work too bad! Fit right on top of the bowl!
 
JDSupreme,

psyshaman

Vapor Viking
14E24B4B-orig.jpg


Just a little family shot I decided to take before I pack up a heap of the toy's I've had out recently.
Normally only have a few in rotation and pack the rest up till I feel like a change

My WalnutZap & Purple Days Pandora are seeing a lot of love at the moment, as is the Launch Box because I'm still mastering it and I always have the Supreme or SSV on hand for the heavy lifting
 
psyshaman,

BossBrew

Metalhead
I am looking to purchase a sick glass piece to be used with my Arizer Solo. I have been browsing Aqua Lab and found some interesting glass but I was hoping someone else has experience with using the Arizer Solo with glass pieces. As a first time glass purchaser I have no idea what size joint and accessories I will need to make sure my vaporizer attaches nicely.

My budget is ~$600 so hopefully I can get something nice!
 
BossBrew,

SD_haze

Well-Known Member
BossBrew said:
I am looking to purchase a sick glass piece to be used with my Arizer Solo. I have been browsing Aqua Lab and found some interesting glass but I was hoping someone else has experience with using the Arizer Solo with glass pieces. As a first time glass purchaser I have no idea what size joint and accessories I will need to make sure my vaporizer attaches nicely.

My budget is ~$600 so hopefully I can get something nice!

while a smaller tube or bubbler might be better, this is a great deal on aqualab

http://aqualabtechnologies.com/scie...orks/stone-glass-works-waffle-tube-short.html

its pretty unique in that it has 16 5-star reviews
altho I guess aqualab is getting more popular so that might start being normal
 
SD_haze,

BossBrew

Metalhead
Wow that is indeed a nice piece! I should have specified that I am looking for something that's definitely smaller, maybe a good bubbler?
 
BossBrew,

Nycdeisel

Well-Known Member
Damn I just saw that SGW short waffle at my lhs! dope looking piece
good sized tube though, not the smaller straight tubes Ive seen.

on alt there are a couple of headford bubblers that are priced well. and LW has some bubblers, lots of people like the 6 arm bubs. Zob has some nice bubblers if you see them in stock there.

I also am into the vertigo showerhead bubblers, those are nice too. ALT also has some 15 arm Leisure brand bubbler that looks pretty good.
just take a look at the scientific bubblers section of ALT and with 600 bucks you have a wide range of options.
 
Nycdeisel,

BossBrew

Metalhead
Nycdeisel said:
Damn I just saw that SGW short waffle at my lhs! dope looking piece
good sized tube though, not the smaller straight tubes Ive seen.

on alt there are a couple of headford bubblers that are priced well. and LW has some bubblers, lots of people like the 6 arm bubs. Zob has some nice bubblers if you see them in stock there.

I also am into the vertigo showerhead bubblers, those are nice too. ALT also has some 15 arm Leisure brand bubbler that looks pretty good.
just take a look at the scientific bubblers section of ALT and with 600 bucks you have a wide range of options.
Awesome! Should I look for a 14MM or 18MM joint? I know there are some adapters out there but is there a best stock size for vaporizers? Thanks for all the information guys I really appreciate it. I love my vape I just want to moisturize a bit.
 
BossBrew,

Nycdeisel

Well-Known Member
Heres the deal, if you get an 18mm, its very easy to find a reducer to get a 14mm opening. but if you have a 14, you have to use an ugly ass adapter to use an 18.

but besides all that, I have no idea what size attachments the Solo comes with.
 
Nycdeisel,

BossBrew

Metalhead
Nycdeisel said:
Heres the deal, if you get an 18mm, its very easy to find a reducer to get a 14mm opening. but if you have a 14, you have to use an ugly ass adapter to use an 18.

but besides all that, I have no idea what size attachments the Solo comes with.
Awesome, that is great information. I am pretty sure I will end up having to get a couple of different size hoses to get a perfect fit but I wouldn't want my nice piece looking ugly with some stupid adapter!

Currently looking at 15 arm Leisure piece that SD_Haze mentioned, it looks sweet.
 
BossBrew,

Stu

Maconheiro
Staff member
I use my LW 15 arm bubbler with my solo and it works great. I do use a 18-14 adapter and it's no fuss at all. You won't need any tubing as the solo mates well enough when placed into the 14mm joint, so no worries there.

:2c:
 
Stu,

BossBrew

Metalhead
Stu said:
I use my LW 15 arm bubbler with my solo and it works great. I do use a 18-14 adapter and it's no fuss at all. You won't need any tubing as the solo mates well enough when placed into the 14mm joint, so no worries there.

:2c:
You are a life saver! For $280, that LW 15 arm is looking extremely appealing. I think I am going to place my order! Thanks for the help everyone I appreciate it.
 
BossBrew,

AgentofChaos

Serial Vapist
Ive decided to replace my bubbler and I would appreciate the opinions of the many glass connoisseurs on this forum. Im torn between 4 different glass pieces and Id be grateful for any suggestions or to hear which one you would pick. Im looking for glass to give the best flavor more than anything. Thanks in advance for your help/comments...

1. Itza Dry to 11 Arm Nano - http://www.itzaglassgallery.com/itz...-to-11-arm-nanoitza-glass-dry-to-11-arm-nano/

2. Mobius Clear Bubbler with Reti Perc - http://aqualabtechnologies.com/scie...orks/mobius-clear-bubbler-with-reti-perc.html

3. Ben Wilson Clear Inline / 6 Arm Dub Bub - http://aqualabtechnologies.com/scientific-glass/ben-wilson/b-wilson-clear-inline-6-arm-dub-bub.html

4. Ben Wilson Triple D Inline Tube - http://rxindustries.com/scientific-...ypage.tpl/product_id/597/category_id/133.html
 
AgentofChaos,
Top Bottom