Madcap79
Jack of all trades, master of none.
Have you tried installing new volcano bags in place of the OEM bags? I used turkey bags successfully but volcano bags would be better I would think.
Discontinued The Herbalizer
- Thread starter nopartofme
- Start date
mixchu69
Well-Known Member
I have never tried that yet. I assume you need to buy the easy/solid valve. Can you use volcano bags directly on the herbalizer without any mod?
Madcap79
Jack of all trades, master of none.
You can change out the bags and use the same squeeze valves that came with the Herbie.
Vapodudule
Well-Known Member
rbienstock
New Member
I was hoping for something a little less DIY.
John Lewus
Well-Known Member
I use Volcano bags with the Herbie mouthpiece. It works great.
Been Vapin
Fringe Class
The Volcano solid valve is a must in my opinion, and is Superior in almost every aspect to the stock Herbie valve.
sch15m
Well-Known Member
I just requested a complete refund for their so called repair and all other additional costs that I incurred for this shit. Fuck this company.
MinnBobber
Well-Known Member
....................................................
In this pic, do you only need the part on the right?
They call it solid valve mouthpiece complete. Coupled with bottom half of Herbie chamber??
Or do you also need the part on the left, the filling chamber?
EDIT-part on left is the solid valve, NOT the filling chamber
Last edited:
Been Vapin
Fringe Class
....................................................
In this pic, do you only need the part on the right?
They call it solid valve mouthpiece complete. Coupled with bottom half of Herbie chamber??
Or do you also need the part on the left, the filling chamber?
You need both items in the picture. You do not need the volcano filling chamber (not in picture).
mixchu69
Well-Known Member
Is that the entire solid valve kit? I went on s&b website and has a lot of separate parts you can buy individuallyYou need both items in the picture. You do not need the volcano filling chamber (not in picture).
Been Vapin
Fringe Class
It's the entire solid valve kit minus the filling chamber. The solid valve kit sells for $99
Or you could buy these items separately for $70 plus the cost of bags
http://www.storz-bickel.com/shop_us/en/solid-valve-mouthpiece.html
http://www.storz-bickel.com/shop_us/en/solid-valve-204.html
http://www.storz-bickel.com/shop_us/en/shop/volcano-balloon-tube-set.html
You do not need this piece.
Madcap79
Jack of all trades, master of none.
I don't grind too fine. A fluffy grind will suffice. If it's too fine, you can get herb in your balloon and it'll gunk up the screens faster, in my experience. Sometimes it takes a pull or two to get decent visible vapor using the whip, depending on moisture in your meds and the temp you have selected. You won't always get big clouds with this unit but the effects are surely there.
36crazyvapors
Active Member
Hi guys, been lurking for a while now but decided to join finally lol! Bought an Herbalizer a couple days ago and I gotta say I'm super impressed with the the vapor potency of this thing. I have the volcano, crafty, super surfer, and this one by far gets me to another level! The first day I got it I actually overdid it which really surprised the hell out of me. It's really hard for me to over vape...with this, not so hard. Two bags and a whip later...I was off in outer space, and for a while too.
I am noticing something though. I usually set my crafty to around so 380-385. My AVB will be a deep coffee brown color when I'm done with the pack. With the herbalizer I set the temp to 385, and finish at 390. My results are greenish brown color which confuses me. My grind consistency is not too fine and I've tried a couple different grinds with same results. I'm also vaping the everlovin' crap out of the material so I know it's not me. Thing is though...I get insanely medicated even without extracting everything. Soooo?
Anyways, I typically don't like vaping above those temps because you start to lose some of the benefits of vaping. I guess I'm just checking to see what you guys are all vaping your herbies at to achieve full extraction, and how you feel about having to raise the temps so high. I'm kind of at a loss because I get super lifted with the herbalizer, but it's not fully extracting the medicine it looks like. I'm not disappointed because the level of medicated I get with this baby is great. But I'm at a loss as to why my material still looks usable when I'm done. Maybe I can use my crafty to finish it off, but I'll have to wait because the POS is in the mail because it broke...
I am noticing something though. I usually set my crafty to around so 380-385. My AVB will be a deep coffee brown color when I'm done with the pack. With the herbalizer I set the temp to 385, and finish at 390. My results are greenish brown color which confuses me. My grind consistency is not too fine and I've tried a couple different grinds with same results. I'm also vaping the everlovin' crap out of the material so I know it's not me. Thing is though...I get insanely medicated even without extracting everything. Soooo?
Anyways, I typically don't like vaping above those temps because you start to lose some of the benefits of vaping. I guess I'm just checking to see what you guys are all vaping your herbies at to achieve full extraction, and how you feel about having to raise the temps so high. I'm kind of at a loss because I get super lifted with the herbalizer, but it's not fully extracting the medicine it looks like. I'm not disappointed because the level of medicated I get with this baby is great. But I'm at a loss as to why my material still looks usable when I'm done. Maybe I can use my crafty to finish it off, but I'll have to wait because the POS is in the mail because it broke...
36crazyvapors
Active Member
Whatever it's doing, it's doing it well lol!!
I'm just used to seeing a more toasted look to the material.
I'm just used to seeing a more toasted look to the material.
MinnBobber
Well-Known Member
............................................................................
With a convection vape, it takes a higher temp to get the ABV browned VS a Crafty which has convection and conduction. Go too high and a convection vape can scorch the herb---maybe that's why Crafty max temp is 410 and Herbie is 445.
I find Herbie ABV at 445 looks like Crafty ABV at 410, just how it is.
At 390 there are a LOT of goodies left as that's almost the start for me. I usually do 370, 390, 410, 425, and 445 to fully extract.
Hydratube + Herbie at higher temps is magical
Herbage in the bag: you can craft a thin round "pancake filter" of degummed hemp fiber to place over herbs to catch all the tiny pieces.
murf2010
Well-Known Member
And that was my exact experience, I've never in my life gotten higher, it was
Too much, I was cleaning and just couldn't wait to finish the job to lay down, that Louie xIII GOT me LIKE!!!!!
Last edited:
Smelly Dog
Well-Known Member
High, first time poster and semi-long time lurker, I finally hit the pay now button over at Puffitup and bought myself an Herbalizer, awwwwwww yeahhhhhhhh!!!!!!!
I own an Arizer Air, Enano, MFLB, and now an Herbalizer. I was in the typical Volcano vs Herbalizer debate and searched the web for days for questions, it came down to which held the least material and work without a hitch. I kept reading that the Volcano works great with .2 or more, and the Herbalizer can work with less easily, I broke out my scale and weighed out what I normally use in my small vapes and decided on the Herbalizer. I paid under $600, if it was still hovering in the $700+ like it use too I would have passed on it, thank gosh the price has dropped!
I own a d020-d bubbler for my Enano, I need to find a system to mate my Herbalizer with. I'm off to search the forum, I'm sure I'll be asking some questions when the unit arrives, Happy Sunday FC!
I own an Arizer Air, Enano, MFLB, and now an Herbalizer. I was in the typical Volcano vs Herbalizer debate and searched the web for days for questions, it came down to which held the least material and work without a hitch. I kept reading that the Volcano works great with .2 or more, and the Herbalizer can work with less easily, I broke out my scale and weighed out what I normally use in my small vapes and decided on the Herbalizer. I paid under $600, if it was still hovering in the $700+ like it use too I would have passed on it, thank gosh the price has dropped!
I own a d020-d bubbler for my Enano, I need to find a system to mate my Herbalizer with. I'm off to search the forum, I'm sure I'll be asking some questions when the unit arrives, Happy Sunday FC!
YungLeaner
Well-Known Member
Easy call to get the Herbalizer over the Volcano. For a whip adapter grab some SSV tubing to replace the stock stuff and then stick in a 18mm M2M for your D020-D. Then stick Herbie on 445...leaps and bounds beyond the volcano...High, first time poster and semi-long time lurker, I finally hit the pay now button over at Puffitup and bought myself an Herbalizer, awwwwwww yeahhhhhhhh!!!!!!!
I own an Arizer Air, Enano, MFLB, and now an Herbalizer. I was in the typical Volcano vs Herbalizer debate and searched the web for days for questions, it came down to which held the least material and work without a hitch. I kept reading that the Volcano works great with .2 or more, and the Herbalizer can work with less easily, I broke out my scale and weighed out what I normally use in my small vapes and decided on the Herbalizer. I paid under $600, if it was still hovering in the $700+ like it use too I would have passed on it, thank gosh the price has dropped!
I own a d020-d bubbler for my Enano, I need to find a system to mate my Herbalizer with. I'm off to search the forum, I'm sure I'll be asking some questions when the unit arrives, Happy Sunday FC!
JKVape302
New Member
[link to counterfeit glass removed]
Would this work? With the Whip?
Can someone help me find the right parts to get set up on an upgrade of the Whip/Adapter/Water Pipe?
I have been lurking since i got my Herbalizer and keep getting lost in this thread so i signed up.
Modnote: Link to labeled counterfeit glass removed.
Last edited by a moderator:
Madcap79
Jack of all trades, master of none.
If you also purchased a 18mm to 14mm reducer, you can just plug the whip right into that and have at it!
Last edited by a moderator: