Discontinued Supreme Vaporizer

Stu

Maconheiro
Staff member
@Stu i notice that you have a Hi and a UD....the question i have is would one of the stems from one of those units work the supreme?? like one of Alans bong adapter stems?
I'm not sure I understand what you're asking here. The SV3 is made to use with water toys and doesn't need any stems or adapters to work. Are you referring to using it for direct draw? I've taken hits directly from the end of the stem, but I much prefer vaporbonging.

:peace:

After two days of using pretty much the Supreme 3 exclusivly I have to agree. The shaping isn't so bad but the edges are...not exactly sharp but rough enough. While not the most elegant solution, some tape did help though. In some way it even goes along with the Fallout-esque appearance of the whole device.


9x4XvpZ.jpg

2qAmhuH.jpg
Brilliant. :cheers:

i'm so doing this when I get home tonight.

:peace:
 

hoyo77

Well-Known Member
I'm not sure I understand what you're asking here. The SV3 is made to use with water toys and doesn't need any stems or adapters to work. Are you referring to using it for direct draw? I've taken hits directly from the end of the stem, but I much prefer vaporbonging.

:peace:


Brilliant. :cheers:

i'm so doing this when I get home tonight.

:peace:
yes i was talking about attaching a stem the same way you attach your water toys and direct draw
 

Herr_Dampf

Well-Known Member
1pOTSBy.jpg

Arizer Solo mouthpiece from @Ed's TnT
Seal is not perfect fit but it works. I'd like an all wood solution, maybe the equivalent of a 14mm f joint in wood instead of the the metal part in this picture.

That said, I have a handfull of nice domes I don't really use anymore that make for a nice glass mouthpiece as well.
9oPQpN7.jpg
 
Last edited:

Ed's TnT

Woodsman
Manufacturer
1pOTSBy.jpg

Arizer Solo mouthpiece from @Ed's TnT
Seal is not perfect fit but it works. I'd like an all wood solution, maybe the equivalent of a 14mm f joint in wood instead of the the metal part in this picture.

That said, I have a handfull of nice domes I don't really use anymore that make for a nice glass mouthpiece as well.
9oPQpN7.jpg
[/QUOTE/]
Interesting, very creative my man! You know something like that you mentioned could be done I'm certain!
 
Last edited by a moderator:

lazylathe

Almost there...
I have grinders, including the GR8TR. I am more wondering about whole nug pieces, as this seems to be the first version with the intention of using whole material chunks

Broke up some Purple Kush into small nugs and jammed them in the tube.
Heat up to 170 and stabilize at 179/181 and hit...Amazing!
I did crumble the load and got a few more massive clouds!
I prefer to grind.

I love loading 0,05g into the stem and place into heated tube at 180.
One hit wonders!
So smooth, so strong!
 

Vitolo

Vaporist
Ed has provided me with a picture of a projected Supreme model… A 120V vape.
He says that he can make it if he believes people will want it.
Due to extremely high responsibilities in his life, he has not had time to come to the website to learn if Vaporists would feel that it's a good idea.
Description:
It can safely stay connected to the wall indefinitely (at the factory set vaporization temp 315F) and the user can pull it off and take 4-5 draws to finish a personal bowl.
It takes 3 mins to heat up. The heat retention will be even greater than the SV3.
Same heating element, bowl design and attachments as SV3. He has told me to feel free to post the picture below on FC.

Ed himself is having problems finding time to participate in the FC Supreme thread, and he worries about not being able to respond adequately due to time restraints.
I have told him as a personal friend that I would do my best to keep the users informed about these developments, and keep him up to date on important questions that may arise….. and also provide him with both positive and negative feedback.
Ed hopes that user feedback will be of a positive nature.
plug%20in%20SV.jpg


PLEASE note.

This is at the moment a concept.
I am posting the concept and image as a favor to Ed, so he can determine if this
would be desirable IN THE FUTURE.
At this time the Supreme 3 is His newest unit, and as you have read, it is "The Bomb"
The Supreme 3 is the only available Supreme, so I am not suggesting that anyone hold off to wait for the Electrical Supreme.
The image above and information I presented are in developmental stages.
 
Last edited:

marduk

daydreamer
Ed has provided me with a picture of a projected Supreme model… A 120V vape.
He says that he can make it if he believes people will want it.
Due to extremely high responsibilities in his life, he has not had time to come to the website to learn if Vaporists would feel that it's a good idea.
Description:
It can safely stay connected to the wall indefinitely (at the factory set vaporization temp 315F) and the user can pull it off and take 4-5 draws to finish a personal bowl.
It takes 3 mins to heat up. The heat retention will be even greater than the SV3.
Same heating element, bowl design and attachments as SV3. He has told me to feel free to post the picture below on FC.

Can the temp be set higher, like up to 400F, if you don't need to leave it plugged in indefinitely?
 

stickstones

Vapor concierge
You guys weren't kidding...smooth, big hits! And the bowl is small, but not too small. My nugget came out like a pellet from the VAP3...fully spent all the way through. The temp display made it easy for me avoid combustion...for me this is the easiest-to-control of the flame-powered vapes. Steam-punk, basic, cheap, garage...call it what you want. But make sure you call it effective!
 

hoyo77

Well-Known Member
Ok it is here...i am a big fan of Ed's but i gotta say these are some of the Shittiest instructions ever. Somebody should do an unboxing video and show how to set this thing up....now to start playing around with this thing.
 

IAmKrazy2

Darth Vapor
Ed has provided me with a picture of a projected Supreme model… A 120V vape.
He says that he can make it if he believes people will want it.
Due to extremely high responsibilities in his life, he has not had time to come to the website to learn if Vaporists would feel that it's a good idea.
Description:
It can safely stay connected to the wall indefinitely (at the factory set vaporization temp 315F) and the user can pull it off and take 4-5 draws to finish a personal bowl.
It takes 3 mins to heat up. The heat retention will be even greater than the SV3.
Same heating element, bowl design and attachments as SV3. He has told me to feel free to post the picture below on FC.

Ed himself is having problems finding time to participate in the FC Supreme thread, and he worries about not being able to respond adequately due to time restraints.
I have told him as a personal friend that I would do my best to keep the users informed about these developments, and keep him up to date on important questions that may arise….. and also provide him with both positive and negative feedback.
Ed hopes that user feedback will be of a positive nature.
plug%20in%20SV.jpg


PLEASE note.

This is at the moment a concept.
I am posting the concept and image as a favor to Ed, so he can determine if this
would be desirable IN THE FUTURE.
At this time the Supreme 3 is His newest unit, and as you have read, it is "The Bomb"
The Supreme 3 is the only available Supreme, so I am not suggesting that anyone hold off to wait for the Electrical Supreme.
The image above and information I presentd are in developmental stages.

Damn. I would be interested, but awaiting to see how i like the V3 bowl design and attachments. This always was a weaker point of the other versions.

Mine should be here monday... But sadly i will be out of town for over a week so wont be testing right away. It will be nice to have that to look forward to.
 

IAmKrazy2

Darth Vapor
Just busted out the v2. I don't have much for screens designed for Supremes left around, and what i just rigged up worked but didn't do the Supreme full justice.
 
IAmKrazy2,
  • Like
Reactions: Vitolo

lazylathe

Almost there...
Okay guys and gals, let's get this thread pumping!!!
More pics and videos to show how versatile this vape truly is!

To start with, here are two videos from last night!
One at 170 and another at 180C!
Amazing vapor production and clouds like you cannot believe!
Load size was 0,05g!

Supreme 3 170C

Supreme 3 180C
 

hoyo77

Well-Known Member
Ok after quite a few hours of playing with this bad boy..here are my views. The more i look at this thing the more i think about how this device was the result of a couple of college kids studying for an exam and in the process they created a very thorough and efficient vape. The only bad thing i can say about this vape is the included instructions. But as with any vape you get more information from the forums here at FC than you do from the manufacturer. All that being said. I have supremes one and two...and they could produce mega clouds and probably produce better vapors than some of the other units out there. Supreme 3 blows 1 and 2 away hands down, at least in my opinion. The temp gauge is more accurate..you get a better roast on the material and better extraction. if the guys in weird science made a vape, supreme 3 would be the result.
 

lazylathe

Almost there...
One more for the day!
Decided to use my FC-711 as it has a big can and i wanted to see if i could slowly fill the can!
And this was the result!
0,05g of White Widow X AK-47!
Temp at 183C
This thing is a BEAST!

 

little maggie

Well-Known Member
As someone posted earlier this seems like a figure it out yourself vaporizer and I am not good at that. I've watched the videos and I think that if I could figure out how to assemble it I have an idea how to use it. Could someone tell me what these small pieces that came with my V3 are for. I can't find a video showing what they are for:
small flat red tabs

metal pin-like piece with the metal rolled at the top

round silicone pieces less than 1 inch long
 
little maggie,
  • Like
Reactions: Herr_Dampf

lazylathe

Almost there...
@little maggie

You get the main vape with the heater block.
A herb chamber that is the long metal tube, mine came with a clear silicone washer installed on one end. This end attaches to your Water Tool. The clear one is for 18mm pieces.
The smaller red one is used for 14mm Water Tools. Remove the clear one and stretch the red one over the shorter part of the herb tube.
The metal pin with the roll on one end is your screen. Install with the rolled part sitting at the bottom of the herb tube and the pin sticking out the longer part of the herb tube. You can then load herb into the tube and slide it into the main body of the vape.
The longest bit of silicone tube is for direct inhalations from the vape. This piece fits over the red silicone disc and will seal against the silicone already installed on the heater tube.

I will try and take a series of pictures and label them from what you receive in the package and how it all goes together!

As others have mentioned the instructions are not very good at all.
Watch some YouTube videos, especially Ed's Supreme 3 videos and watch carefully and you will pick a lot up from them!
 

nosmoking

Just so Dab HAppy!
As someone posted earlier this seems like a figure it out yourself vaporizer and I am not good at that. I've watched the videos and I think that if I could figure out how to assemble it I have an idea how to use it. Could someone tell me what these small pieces that came with my V3 are for. I can't find a video showing what they are for:
small flat red tabs

metal pin-like piece with the metal rolled at the top

round silicone pieces less than 1 inch long
I was a little confused at first too, but after watching Ed's 10 second unpacking video it all made sense how to load the bowl and use the paperclip like screen. Watch this like 5 times over and it will probably start to make more sense.

I tried Ed's method a few times. Then I stuck a flat screen (mouthpiece screen from an ESV) in the metal tube and pushed it to the crimp in the metal tube. Now I can load ground material like @Stu mentioned doing.

What are your plans for using the device @little maggie ? Do you intend to hook to water or use direct?

I would like to speak on Ed's customer service. He provides a number in the instructions that I thought would go right to some answering machine or voicemail right away considering I was calling Saturday morning around noon. I was only calling because my thermometer would not turn on and I was hoping there was some trick like click the button 5 or 10 times or something. Ed not only answered the phone, but he walked me through taking the battery out and everything. Turns out my battery had a bad connection or something but it started working while I was on the phone with Ed. I commended him and quickly jumped off the phone to start heating!

5 or 10 minutes later I sent this message to Ed via text, "This thing is great man! It is exactly wat I have been missing since I stopped smoking over a year ago."

I was always a bong toker at night or on weekends. Ever since fully converting to vaping my bong has longed for a companion that will really fog it up. I have tried hooking the Daisy and the ESV and the Firewood3 and they all can perform but typically with great challenges that make them not so great for typical use with a bong. The Supreme V3 fills my bong thick (it looks like I am combusting basically) but my herbs come out a nice even med-dirt brown. I get about 3 hits to a full pack but it is hard to take all 3 because by the 3rd hit I really just need a moment to re-calibrate myself.

Anyways I'm off for another session with the V3. I am loving it!
 
Top Bottom