AJS
Calm Consistency
Think I'll be able to send mine back and get a different one when they arrive? That possible?
Once again, thank you for adapting your gongs for us!
DDave Mod for SSV/ DBV/ LSV
- Thread starter Hashtag46&2
- Start date
-
- Tags
- 18mm 7thfloor accessories mods
Once again, thank you for adapting your gongs for us!
AJS
Calm Consistency
This bud is unusually heavy and that would normally be about a .06-.07 but with this bud it was most likely a .1 unfortunately. This made it a nice light brown on top. Got another huge, same sized rip, on the second hit. 3rd hit weakest of course.I saw the vid...that was awesome!
For science, I gotta know... did you measure the quantity of herb in that sesh? And did that one hit cache it?
Inquiring mindsand all
vapelord420
Member
Decided I'm going to pull the trigger on the mod for my DBV today. Excited
AJS
Calm Consistency
@vapelord420 You won't regret it!
@DDave
Just to maybe help out a bit...
One side of my M2M is ever so slightly larger than the other (not sure if on purpose, doesn't affect performance, and isn't noticeable to the eye), and that side can slide into my D020-D and make a better seal than the other side, almost near perfect to where the amount coming in wouldn't bother me, but the glass side notch still barely touches my glass. So even just having that side notch slightly higher (as long as it doesn't interfere with the lsv) should clear the D020-D and most likely the GB-187 as well.
You do you, though! Just trying to give you as much information as possible to work with if you wanted it.
@DDave
Just to maybe help out a bit...
One side of my M2M is ever so slightly larger than the other (not sure if on purpose, doesn't affect performance, and isn't noticeable to the eye), and that side can slide into my D020-D and make a better seal than the other side, almost near perfect to where the amount coming in wouldn't bother me, but the glass side notch still barely touches my glass. So even just having that side notch slightly higher (as long as it doesn't interfere with the lsv) should clear the D020-D and most likely the GB-187 as well.
You do you, though! Just trying to give you as much information as possible to work with if you wanted it.
@vapelord420 My apologies. I was just updating my listings and you may have placed an order while I was in the process. The update was below...
********DELAYED SHIPPING NOTICE******
Dear Friends and Valued Customers, due to current circumstances, I will be unable to ship this kit until the 3rd week of February. Due to this inconvenience, I will offer any who order and wait 1 additional free glass piece from this kit and a 2nd full set of screens absolutely free! Apologies for the inconvenience.... Sincerely, DDave
*********************************
If that was your order, I've sent an eBay message as well. Please reply to the eBay message letting me know how you want to proceed.
Thanks,
DDave
@AJS the different sized sides are on purpose, though the slight offset of the handle is not.. that is one of the "features" of hand created custom glass. I am glad to hear you've found this as a solution and I'm still looking into handleless adapters, as the handle or lack thereof will not affect the mod performance.
Thanks!
Wooooo!!! Haha quoting @srama21 quoting RF. I got the same kit. A lot more control!
srama21
Monotonous Botanist
@vapelord420 @Slow Draw McGraw WOOOOOOOOOOOOOOOOO
AJS
Calm Consistency
Still loving this DDaves mod as much as when I first got it.
The stem is soooo tasty!
And guess what.....
We can use the GonG attachment AND the stem AND the basket screens, all with the Zion that I'll most likely be ordering this Friday. That's right...all this is usable with the Zion, as the Zion heater rests under an 18mm Female.
Praise Jesus (DDave)
The stem is soooo tasty!
And guess what.....
We can use the GonG attachment AND the stem AND the basket screens, all with the Zion that I'll most likely be ordering this Friday. That's right...all this is usable with the Zion, as the Zion heater rests under an 18mm Female.
Praise Jesus (DDave)
srama21
Monotonous Botanist
@AJS this is a dope development, can't wait to get a zion. TBH i would probably be very impatient if it wasn't for this mod kit. I love having 3 unique options to get wrecked anytime I want. Can't wait to see what El Matador is cooking up with later iterations of this mod kit and also for the Zion. I ordered a zion in september, if I get mine soon I got a tester for you @DDave
AJS
Calm Consistency
I agree with you! The wait is going to be very easy with the LSV!
If I'm not mistaken, pre-production orders, or the ones in 2015 (not sure), should be finishing the shipouts this Monday and a bit more the week after. Not sure how accurate I am though with that statement. I'll be ordering mine Friday. Hopefully you can get your Zion soon and test out the ddave stem!
(already a video of the GonG in use by someone!)
Awesome! That is great feedback!
And this part had me and the wife laughing!
Dj Bass
Well-Known Member
Just pulled the trigger on my own Ddave LSV kit. I have tried the Airizer screen kit in my vape before, but they never fit quite right, and would sometimes come out in the vape and spill everywhere. Can't wait to get a custom set up that is designed to work together. Also, Ddave's whole kit price is about the same price as one dry wand for LSV direct from 7th floor, so it's really genuinely hard to beat. Plus his comes with tubing, and spare screens. Excited for the extra bits and pieces, and not worried about the shipping delay. Good things are worth the wait!
TboneToker
Well-Known Member
@TboneToker I'm honored by your words and don't really know what to say other than... Thanks!
Always looking for feedback, positive or negative. It helps improve the kits. Some improvements that have resulted from feedback:
* The Anti-Flex Collars
* Hot Adapter Clamps that are easier to use, requiring less hand force.
* Internal Adapter Screens - easier flex, mesh size change so even less material had chance to fall on heater
* Water tool whip adapters added.
Keep the feedback coming! Be it issues or additions, positive or negative, it all helps!
(Oh, and I use the mods as well...
)
Always looking for feedback, positive or negative. It helps improve the kits. Some improvements that have resulted from feedback:
* The Anti-Flex Collars
* Hot Adapter Clamps that are easier to use, requiring less hand force.
* Internal Adapter Screens - easier flex, mesh size change so even less material had chance to fall on heater
* Water tool whip adapters added.
Keep the feedback coming! Be it issues or additions, positive or negative, it all helps!
(Oh, and I use the mods as well...
)
TboneToker
Well-Known Member
@TboneToker I'm honored by your words and don't really know what to say other than... Thanks!
Always looking for feedback, positive or negative. It helps improve the kits. Some improvements that have resulted from feedback:
* The Anti-Flex Collars
* Hot Adapter Clamps that are easier to use, requiring less hand force.
* Internal Adapter Screens - easier flex, mesh size change so even less material had chance to fall on heater
* Water tool whip adapters added.
Keep the feedback coming! Be it issues or additions, positive or negative, it all helps!
(Oh, and I use the mods as well...
I don't own anything that can use your mods atm, kind of wish you owned an aromed so you could mod it too hahah,
But honestly think about it, you're saving hundreds of people money/material which is good for their pockets, good for the earth, good for business, and you're figuring out things for people with true pain, like your post mentioned you're trying to figure out easier to handle mods etc. GODLEVEL,
I will most likely own a 7th floor product one day but right now I have other priorities!