Discontinued Haze Dual V3

namasteIII

Well-Known Member
No Prob. Yeah I wanted to start it but no big deal. I was going to put all the specs in the first post and edit it as details were finalized. I didn't expect this video to go up so soon either. We just filmed it yesterday.

Anyway no biggie. I will add some details we know a bit later but right now getting a bite after an already long (but productive) day. :)

Enjoy the food, I can imagine it must of been a hard day.

When you do post info I'll be sure to quote and edit it so other can see the info on the first post.
 

woolspinner

Well-Known Member
This is just a bit of a funny for pet owners: I just used my tweezer tool to remove a 1.5 inch white guard hair (Dog, English Cocker Spaniel ) that was UNDER the green "mesh" on the back. How the...??? I noticed it because the base material is black, so it stood out. Pet hair can go anywhere!
 

SoulHerb

Member
Seems i had the worse timing asking a few questions :') haze square looks promising tho
 
Last edited:
SoulHerb,

gkaraman

Well-Known Member
Square rightfully took all attention lately!! Haze is synonym of versatility. Covers everybody's preferences.

Until then I try to find ways of successfully putting small doses on V3. I have not any pipe screens and the best way I have found is to put the silicon lid on top of conduction or convection screen to make things tighter.
Have you find any other solution for packing small amounts and see good vape results?

Also does anybody know if the MFLB wooden stem and the MFLB draw whip fits with Haze V3 ?
 

Creeper

deep in the matrix...
This might have been asked but does anyone notice a difference in the vapor out of the 2 chambers of the V3?

In the first few sessions I noticed that the black circle chamber produces more vapor then the other one.

I might be pretty baked though so lol. :ko:
 

Dynalowrider

Well-Known Member
The silicon tubing with the MFLB Orbiter slips right over the Haze stem.

Creeper, the "solid circle" ovens vapor path is maybe 1/4" longer than the "black circles" vp.
I use my Orbiter with my Haze, and I've found that you can change vapor and flavor by adjusting the time the vapor stays next to the heat, (how far the mouthpiece is in the vape, how fast you draw in air).
If you pull the mp almost all the way out. The vapor goes straight out, push it almost all the way in, the vapor has to go to the back of the vape to go out the mp. As you can see it has to pass by the hot "black circle" oven again on the way out. I use the glass stem to be able to see how much vapor is coming out of the Haze. Helps control the draw.
Like I've said before Get to know your Haze, to get hazed better. Doc Holliday said that.:lol:
 

SoulHerb

Member
That may be true (but let's all remember that these are two totally different vapes) but I also think your question may be a bit too subjective for most. There are so many factors that go into it so it's a bit hard to quantify.

Thanks for the reaction,

i only need to know if the haze v3 has a strong burnt popcorn flavor at the end & if it kicks in after a few hits or only at the end? i know it's subjective, still some opinions could give me an idea of it

I have compared the crafty/mighty to arizer solo, air, EQ, MFLB, firefly & know that every unit is a different vape. But the burnt popcorn flavor is in all the vaporizers (barely with crafty/mighty)

Def dont need an in depth crafty vs haze explanation as i already know the difference, which is quite obvious in my eyes (if you have compared different vapes already). Versatility, battery life, ...

I'm gonna try out one either way, just wanted to know if it's worth the effort (for myself)

i do my homework before i ask a question ^^ ain't no newbie here

But thanks for the reaction, it's very nice to see a company taking the effort to help the customers on FC, if only some would do the same! Def a +100 respect points for Haze ;)
 
SoulHerb,

scottg402

Well-Known Member
I have other vaporizers (owned almost everything you mentioned at one point) but as a company rep I really can't discuss and compare against other manufacturers.

Thanks for your kind words. The Haze family continues to grow and we would love to have you on board!
 

Custom Flower Hardware

Well-Known Member
Manufacturer
Thanks for the reaction,

i only need to know if the haze v3 has a strong burnt popcorn flavor at the end & if it kicks in after a few hits or only at the end? i know it's subjective, still some opinions could give me an idea of it

I have compared the crafty/mighty to arizer solo, air, EQ, MFLB, firefly & know that every unit is a different vape. But the burnt popcorn flavor is in all the vaporizers (barely with crafty/mighty)

Def dont need an in depth crafty vs haze explanation as i already know the difference, which is quite obvious in my eyes (if you have compared different vapes already). Versatility, battery life, ...

I'm gonna try out one either way, just wanted to know if it's worth the effort (for myself)

i do my homework before i ask a question ^^ ain't no newbie here

But thanks for the reaction, it's very nice to see a company taking the effort to help the customers on FC, if only some would do the same! Def a +100 respect points for Haze ;)
No popcorn taste like the og pax has. Flavor stays all the way through. Mighty beats the taste for me by just a hair
 

rshetts

Well-Known Member
Square rightfully took all attention lately!! Haze is synonym of versatility. Covers everybody's preferences.

Until then I try to find ways of successfully putting small doses on V3. I have not any pipe screens and the best way I have found is to put the silicon lid on top of conduction or convection screen to make things tighter.
Have you find any other solution for packing small amounts and see good vape results?

Also does anybody know if the MFLB wooden stem and the MFLB draw whip fits with Haze V3 ?

If its the same draw whip as the ones with the MFB Orbiter it works great with the Haze V3. I use an Orbiter with mine all the time and it works great with no alterations. Just insert the stem into one of the whips ( its a perfect fit ) and youre good to go.

As far as pipe screens, you can get them cheap at Amazon. The price and amount varies but you can get 25 screes for $2, 200 screens shipped free for $9 or 500 for $12. Just search Brass Tobacco Pipe Bowl Screens at Amazon and you find them easily.
 

Drexciya

Homage to the Deepsea Dwellers
I had my first outside sessions last weekend. I prepacked a two cans and two convection screens. Again, stealth is awesome. When smoking a joint in public you'll get the occasional glances of people. With the haze nobody bats an eye. All of this was outside, I havent tried it indoors in a situation where it wouldn't be appropriate yet.

One thing I noticed while vaping outside is that the convection screens had a hard time going thru my bud compared to indoor use. My thoughts about this was that the air temperature couldn't be heated up enough because the temperature outside was much lower than indoors. The cans didn't seem to be effected as much. Can anyone confirm this?
 

Dynalowrider

Well-Known Member
Scott, How long can you keep the cleaning powder after mixing. Does it need refrigeration? Can you mix it up then set it aside for a couple days? Coconut milk and coconut water both say "Keep Refrigerated". I'm still trying to remember where I've smelled this stuff. It looks like the stuff I used to put in little rows and snort.:lol:
Just a suggestion, how about putting links to the cleaning video, maybe a couple reviews on the Haze page. Doc
 
Dynalowrider,

scottg402

Well-Known Member
Hi Doc,

It's really one time use. However there is enough in there for many uses. Where do you want the cleaning links? I think we put them here on FC already.

As far as our website, the cleaning link is in the FAQ section under "how often do I need to clean my Haze?"
 

Dynalowrider

Well-Known Member
I was looking around to find out how much to measure out. Just thought it would be nice to have a place on the Haze page to find videos. Thanks Doc
 
Dynalowrider,

higgs

Member
Been kind of out of the loop for a bit. Is their going to be a v4 and how far off do you figure it might be? I have to send my Haze back cause the top bowl always goes rogue on me and just heats up to combusting temps no matter what settings (it also never stops blinking). The bottom bowl seems to still work fine though and I've just been using it as a single bowl device heh. Its a version 2.5
 
higgs,

scottg402

Well-Known Member
Hi Higgs....No word on a V4. We have other projects working right now. It's unclear on if there will be a V4 and if it does come around, when it will be.

Sorry your unit is acting wacky! I just sent you a PM with instructions to get you fixed up.
 

Creeper

deep in the matrix...
So far loving the unit, I think it's a minor issue regarding the vapor quality out of both chambers... it may have been environmental differences that affected my perception but I'll continue to watch it for the next few sessions.

I noticed that the stem area needs to be cleaned well regularly or else it will be hard to move in and out of the unit. Also need to use the 99% iso in the chambers as resin was already forming that the 70% iso wipes couldn't remove.

The compact package is still boss, stealth vaping for the win! :ninja:
 

mixchu69

Well-Known Member
Hi Higgs....No word on a V4. We have other projects working right now. It's unclear on if there will be a V4 and if it does come around, when it will be.

Sorry your unit is acting wacky! I just sent you a PM with instructions to get you fixed up.
Hi Scott,

Quick question: if there is no v4 in the picture, what happens to those in the upgrade problem? I know this question is speculative (maybe haze creates v4). I know haze takes care of their customers so I'm not concerned, just curious.
 
mixchu69,

scottg402

Well-Known Member
Hi Scott,

Quick question: if there is no v4 in the picture, what happens to those in the upgrade problem? I know this question is speculative (maybe haze creates v4). I know haze takes care of their customers so I'm not concerned, just curious.
IF the V4 comes and everyone that is enrolled in the program sends in their V3 , we send them the V4.

Basically nothing changes for folks already enrolled.

For those not in the upgrade program I would like to direct them (and everyone else for that matter) to our loyalty program here.

There are many ways to earn points, including purchases obviously but you might be surprised to see you can earn points for things that you are already doing now. Example....You put a review on FC or another forum. Contact me and I will log your points. Most other activities are automated.

Check it out. This is just a base of the program and we may be adding to it in the future.
 
Last edited:

Joeyvapes

New Member
Hello everyone im not new to the vaporizer scene but im looking at a portable for on the go im stuck between the haze v3 (of course) and the alfa and last but not least the summit which is best over all performance and vapour quality/production wise? Please help
 

stefuschko

New Member
Hi Everybody

I just received my new Haze V3 form my Shop. It takes always a bit longer until new devices from US arrive in Switzerland - but finaly it is here. I read a lot about it and bought it because it can also do oils wax .... (Until now I was using the arizer solo / air).

I have mainly to questions about my new device:

1) Is it normal that the outside of the oven gets so hot?

2) The device itself has a pretty strong smell when it is heated up. I'm just a bit worried about this vapors from the device - are they healty at all? Is it normal for the device to smell pretty strong when its new? (I did not put any herbs or concentrate in it yet). Will it be better with time or this mell will stay? I just want to avoid to inhale some funny chemicals etc.

I'm just comparing it to the solo where there was a minimal smell/tast form the device and since then is like only the taste/smell from herbs.

Would very much appreciate some information and experiences from you guys.

THX
 
Top Bottom