Cheap High Quality Bubbler

J

JakeSteele2

New Member
Well, I bought me few pieces from our friends at china. All of them arrived in registered mail, packed like baby souls, took average time (3 weeks) to get here. I review here the ones I got from sunshine, which had the best packaging and the fastest delivery.
Here is a video of me using them (sucking air):
It's the D020-D and YQ-2285
http://www.dhgate.com/product/2015-.../264440580.html#myaccount_activeorders-1-null
http://www.dhgate.com/store/product/d020-d-bubbler-glass-water-percolator-smoking/187214099.html
Both of them hit like great mofos. Amazing what some glass wizardry can do to the vapor.
Though I think it's worth noting that they're far from perfect, and the various slits and holes are more for show. Most of the gasses escape through single exit point IMO, and my next piece would be a simple one.
7hb1pk7.jpg


N3NQuyy.jpg
 
jds32

jds32

Well-Known Member
I received my Rattle Can from Steven today. It's well made, looks good and functions correctly.

For the next revision, I suggest reducing the air path restriction where the joint enters the can, and also where it curves down. Those two points may combine to cause just a little more initial draw restriction than the FC-710. I'm curious to see where resin builds up after a week of use. The lower portion of the diffusion pump, and loose ball, are flawless.
 
little maggie

little maggie

Well-Known Member
Has anyone tried the FC-Mod? Ever since mine arrived it's replaced any other bubblers I own. It works so well with my logs and arizer air/solo etc. I like the mouthpiece and that it works with both 14 and 18mm stems. I don't use the ash catcher attachment or one of the percolators but it still is everything I want in a bubbler.
 
TheDarkOne

TheDarkOne

Well-Known Member
I have the one on the right and absolutely love it. I have a Mobius Nuc but don't don't like traveling with it due to it's cost and that people can sometimes try to borrow things without your consent lol. I picked up the clone to have as a road bong that mimicked the same stylings and size I came to favour with the Nuc.
I can't tell any difference in terms of functionality between the two. The clone even has a 18MM joint to the Nucs 14MM. I got lucky and my perc is level too!
 
TheDarkOne,
  • Like
Reactions: ragnorokk
DabDiva

DabDiva

Member
jds32 said:
I received my Rattle Can from Steven today. It's well made, looks good and functions correctly.

For the next revision, I suggest reducing the air path restriction where the joint enters the can, and also where it curves down. Those two points may combine to cause just a little more initial draw restriction than the FC-710. I'm curious to see where resin builds up after a week of use. The lower portion of the diffusion pump, and loose ball, are flawless.
Click to expand...

Is it uncomfortable for you that the joint is placed higher than the mouthpiece ? Therefore making it impossible to see where you place your oil on the nail
 
DabDiva,
  • Like
Reactions: pigfoot
Bongologist

Bongologist

JoJo Woodworks
Accessory Maker
@little maggie i have the FC-mod and I like it but my UFO is still my go to daily driver. I think once I have a new hydrotube the mod might come back into play, especially for reclaim, but I find the draw resistance, amount of water, and my custom mouthpiece or whip, make the UFO almost perfect for me. The mod is super easy to clean though and I always love that in a bubbler. Glad you found something you like!
 
MGG

MGG

Well-Known Member
I'm seeing a lot of love for the UFO and wondering why there's so much love for it? is it the can size that makes it perfect for most people?
 
Bongologist

Bongologist

JoJo Woodworks
Accessory Maker
The can is bigger then the mod so it holds more water but still retains great flavor. I like the perc much better then a matrix or showerhead, the drag resistance is perfectly between an old school straight tube bong (chuggy) and say a D020-D (airy). It's modular and easy to swap out various mp's and my whip, and the way the vaporizer sits on the can, even with various dropdowns or carb attachments, it will never tip over. I have about 20 different bubblers and bongs at the moment and they all have their merits, but the UFO, for me, just works really well.

@John Lewus it will be a few weeks on the tubes...Chinese new year. Checkout the custom glass design thread.
 
llebhcaoc

llebhcaoc

Well-Known Member
Down to deciding which medium cheap DHgate piece to order....GB-188 vs FC-187 V2...plan to use w various vape engines....which style perc should I go with, a honeycomb disc or a showerhead slitted perc? Leaning toward the showerhead but the honeycomb is within a few bucks too....prob should just buy both....Draw resistance difference? Any and all input is welcome....Thanks in advance FC community!
 
llebhcaoc,
pigfoot

pigfoot

Dabs are vapor too!
llebhcaoc said:
Down to deciding which medium cheap DHgate piece to order....GB-188 vs FC-187 V2...plan to use w various vape engines....which style perc should I go with, a honeycomb disc or a showerhead slitted perc? Leaning toward the showerhead but the honeycomb is within a few bucks too....prob should just buy both....Draw resistance difference? Any and all input is welcome....Thanks in advance FC community!
Click to expand...

Couldn't find the GB188, linky? I'd skip the honey comb. 187 is a matrix perc.
 
pigfoot,
llebhcaoc

llebhcaoc

Well-Known Member
Last edited:
llebhcaoc,
jds32

jds32

Well-Known Member
DabDiva said:
Is it uncomfortable for you that the joint is placed higher than the mouthpiece ? Therefore making it impossible to see where you place your oil on the nail
Click to expand...

Yes, the mouthpiece is angled too low. This piece has everything going for it. Unfortunately, for me, that mouthpiece angle breaks the deal. No regrets, as I said, it's well made, stable and functions correctly, which says something for a diffusion pump. As a new design process, to witness the FC community put forth this design, I'm proud to have participated, even if only with a purchase and review.

I've already switched back to my FC-MOD. I use the birdcage-looking perc, replacd the ash catcher with a dropdown for my SiC+Auber, and replaced the mouthpiece with the whip adapter from my FC-UFO (which has way too much volume for me). I love it, it's stable, draws easily and is really fast to clean.
 
pigfoot

pigfoot

Dabs are vapor too!
llebhcaoc said:
http://www.dhgate.com/product/hot-sell-the-newest-glass-oil-bong-glass/190999932.html

The GB-188 is the Honeycomb....so you'd go with the 187 then....?

Quite a bit of negativity on here recently re: Steven....still go with the 187 V2? How about that one vs a D020-D from Sunshineglass?

Thanks PF!
Click to expand...

I think honeycombs are better for combustion. I had a D020 D that was great for vapor, but I just dab now, so I sold it. Never tried the 187, but I think the hit would be similar.
My orders from Steven arrived quickly, communication was good. Quality control was lacking, they offered a refund, but the piece I really wanted is subpar, so I'm disappointed. That kind of thing isn't confined to Steven, unfortunately.
 
IAmKrazy2

IAmKrazy2

Darth Vapor
Any recommendations for a nector collector glass straw or whatever they are called? Never.used one but appears to be a great option for crumble or shatter
 
IAmKrazy2,
deltr0n

deltr0n

Big Daddy Oil
jds32 said:
Yes, the mouthpiece is angled too low. This piece has everything going for it. Unfortunately, for me, that mouthpiece angle breaks the deal. No regrets, as I said, it's well made, stable and functions correctly, which says something for a diffusion pump. As a new design process, to witness the FC community put forth this design, I'm proud to have participated, even if only with a purchase and review.

I've already switched back to my FC-MOD. I use the birdcage-looking perc, replacd the ash catcher with a dropdown for my SiC+Auber, and replaced the mouthpiece with the whip adapter from my FC-UFO (which has way too much volume for me). I love it, it's stable, draws easily and is really fast to clean.
Click to expand...
I'd LOVE to see the rattle an with a mouthpiece closer to the straight fab, out the top of the can of need be
 
deltr0n,
llebhcaoc

llebhcaoc

Well-Known Member
pigfoot said:
I think honeycombs are better for combustion. I had a D020 D that was great for vapor, but I just dab now, so I sold it. Never tried the 187, but I think the hit would be similar.
My orders from Steven arrived quickly, communication was good. Quality control was lacking, they offered a refund, but the piece I really wanted is subpar, so I'm disappointed. That kind of thing isn't confined to Steven, unfortunately.
Click to expand...

Thanks for the benefit of your expirience Pigfoot...You're right, unfortunately subpar quality control is certainly not limited to asian based businesses. Going to go with one of the matrix percs...might have bumped myself up to the UFO....Anyway...thanks again!
 
llebhcaoc,
  • Like
Reactions: Morty
CuckFumbustion

CuckFumbustion

Lo and Behold! The transformative power of Vapor.
A lot of people keep convincing themselves publicly on the EQ thread that they want to purchase a d020-D. It's like a fever I tell ya. :zombie: I do want to be a helpful FCer and do my civic duty in the threads to stamp out combustion.:goon: So...
Can anybody recommend a reputable buyer, or any general do's and don't before I send them off? :hmm:I just became even that much more aware of the Chinese business practices and scrutinizing what surprise you may be getting in the mail. I want to educate myself on types of glass, especially food grade and heat resistant qualities. Want to be knowledgeable enough to have materials for scratch visual and integrity tests on hand. Perhaps pass that on too. ;)

If their is a more appropriate thread please advise. Otherwise I think it would be wise to inform yourself if you ever bought anything from china. Like say from ebay as another example, to at least be able to make a good visual inspection.

I am waiting for tax returns before anything. Would it be smart to buy adapters from the same dealer who you buy the main piece from? Is any of the DHgate sellers known for scientific glass? What is the distinctions between scientific glass and say borosilicate glass? Feel free to go completely over my head on the subject matter.:whoa:

Would like to hear more about the practice of sellers trading items from other sellers to fill a request overseas. So you buy from glassblower A and get a piece from glassblower F who may use inferior product or have poor QC , all due to some family or back alley trade whatever. The glassblowers here are cohesive like that. Just wouldn't do business in that manner. Welcome to the East.
 
Last edited:
CuckFumbustion,
Y

YungLeaner

Well-Known Member
CuckFumbustion said:
A lot of people keep convincing themselves publicly on the EQ thread that they want to purchase a d020-D. It's like a fever I tell ya. :zombie: I do want to be a helpful FCer and do my civic duty in the threads to stamp out combustion.:goon: So...
Can anybody recommend a reputable buyer, or any general do's and don't before I send them off? :hmm:I just became even that much more aware of the Chinese business practices and scrutinizing what surprise you may be getting in the mail. I want to educate myself on types of glass, especially food grade and heat resistant qualities. Want to be knowledgeable enough to have materials for scratch visual and integrity tests on hand. Perhaps pass that on too. ;)

If their is a more appropriate thread please advise. Otherwise I think it would be wise to inform yourself if you ever bought anything from china. Like say from ebay as another example, to at least be able to make a good visual inspection.

I am waiting for tax returns before anything. Would it be smart to buy adapters from the same dealer who you buy the main piece from? Is any of the DHgate sellers known for scientific glass? What is the distinctions between scientific glass and say borosilicate glass? Feel free to go completely over my head on the subject matter.:whoa:

Would like to hear more about the practice of sellers trading items from other sellers to fill a request overseas. So you buy from glassblower A and get a piece from glassblower F who may use inferior product or have poor QC , all due to some family or back alley trade whatever. The glassblowers here are cohesive like that. Just wouldn't do business in that manner. Welcome to the East.
Click to expand...
The d020d from sunshine store is about as reliable as it gets in terms of DHgate class. Not my favorite for vaping because of the remarkably low drag, but an awesome piece. "Scientific glass" simply refers to any type of bubbler/bong/whatever that was created for its function, not for art--which usually means percolators (shaped water diffusers that make bubbles to make the vapor less harsh) and clear glass, because "worked" or colored glass is usually made by glass artists who are focusing more on the art than the function. I wouldn't worry about any type of danger from heat in this glass, no more than any American glass...The larger Chinese companies are not so dissimilar from the American glassblowing companies, save for a certain lack of QC consistency (depends on the seller, etc., avoid Steven & CCG) that is made up for by saving literally HUNDREDS of dollars. Adapters would be smart to get from the same seller for shipping purposes. PM me if you have more questions regarding glass
 
pigfoot

pigfoot

Dabs are vapor too!
YungLeaner said:
The d020d from sunshine store is about as reliable as it gets in terms of DHgate class. Not my favorite for vaping because of the remarkably low drag, but an awesome piece. "Scientific glass" simply refers to any type of bubbler/bong/whatever that was created for its function, not for art--which usually means percolators (shaped water diffusers that make bubbles to make the vapor less harsh) and clear glass, because "worked" or colored glass is usually made by glass artists who are focusing more on the art than the function. I wouldn't worry about any type of danger from heat in this glass, no more than any American glass...The larger Chinese companies are not so dissimilar from the American glassblowing companies, save for a certain lack of QC consistency (depends on the seller, etc., avoid Steven & CCG) that is made up for by saving literally HUNDREDS of dollars. Adapters would be smart to get from the same seller for shipping purposes. PM me if you have more questions regarding glass
Click to expand...

I think a lot of members have gotten good pieces from CCG & Steven. I don't think they're any worse than the other sellers I have bought from (Kathy and Sunshine store, yingmin, etc). IIRC one member was very irate about one piece from Steven, but statistically this is a very small sample.
 
Y

YungLeaner

Well-Known Member
Yeah, I mostly said that to pay lip service to those who have gone through a ton of trouble from Steven, which I know has happened. My FC UFO is the nicest glass I've ever owned!
 
YungLeaner,
  • Like
Reactions: ragnorokk
ReeferChiefer

ReeferChiefer

Well-Known Member
So I just received the G-line to Imperial from HFY Glass aka Phoenix Glass. Compared to my more expensive rigs this one doesn't feel cheap at all. It has nice weight to it, the glass is thick not just on mouthpiece and base. Still some minor imperfections but at this price range I think that's irrelevant. I have a video to contribute on how it functions. I used a dropdown and nail to show how the filtration operates under a lot of restriction. This nail specifically has very restricted flow due to the narrow opening. The pulls I did without the nail were to show function with free flow while pulling the hardest I could. This thing performs like a champ, virtually no splash back whatsoever, maybe a tiny drop after 10 pulls. The filtration works as it should even under restricted airflow. Not even my Matrix percs filtrate this good under slow pulls.

 
You must log in or register to reply here.
Top Bottom