• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

Bongologist

JoJo Woodworks
Accessory Maker
So, my wife absconded with my ogb carb adapter and I wanted to try a few different things. Got some dropdowns that were useless, one was twisted by about ten degrees to the side tipping the vape, and none actually dropped anything lower. But at $3 each, wtf! I did buy this reclaimer to use as a smaller claisen and for $6 it's pretty nice. Doing a good job of keeping my UFO a little cleaner. It came with a glass bucket collector but I liked my homemade cork better as a carb.
@ataxian i thought you might appreciate this.
8qhLeQB.jpg
 
Last edited:

2 Cycle

Well-Known Member

I had a seller on dhgate make a custom piece for me. What do you guys think? Was a little pricey but pretty worth it seeing as how it's a 1 of 1 piece (for now)
looks great! I like that lemony look, could probably go a half year without cleaning it and not even notice lol
 

weenstoned

Well-Known Member
$100, not too bad considering I could flip it online for like 4 bills. This is why when people say chinese products are trash I just laugh in their faces.

Is the vendor Clean & Clear Glass? Or if not if you'd mind saying who it is that would be cool.
 
weenstoned,
  • Like
Reactions: Copacetic

YungLeaner

Well-Known Member
I don't think he meant he was going to flip it online for 4 bills. Although, given the crowdsourced and ever-bending nature of glasshead moral standards, I can't say that he's really doing something wrong unless he lies about its origin or quality. If someone wants something for 400, then they buy it. Castigation of individual resellers on FC (not you, but have seen some) seems a bit off-target when there are entire COMPANIES (looking at you, Zob & Hitman & Simba) that brand Chinese-made (though sometimes assembled in America) percs and glass as American along with the accompanying price jack.
 
YungLeaner,
  • Like
Reactions: ragnorokk

weenstoned

Well-Known Member
Ya I don't think it's necessarily ethically right to flip that for $400, but good luck finding something that elaborate and full colour for $400 from an American artist.
 
weenstoned,
  • Like
Reactions: ragnorokk

deltr0n

Big Daddy Oil
Inyour case you read absolutely correct. What you may have misinterpreted from the article is that glass doesn't get softer in a sense making it easier to cut or manipulate. Softer means it takes much less heat to soften said glass. The surface doesn't actually become "soft".
Shower thought I had: if a seller is willing to sandblast or has a sand blasted piece, it would definitely be boro, correct? Since other glasses don't seem to take blasting well?
 
deltr0n,

MGG

Well-Known Member
I don't think he meant he was going to flip it online for 4 bills. Although, given the crowdsourced and ever-bending nature

Maybe not, but fairly clear he bought it to flip imo judging by the youtube description
"Anyone interested in this piece let me know, willing to trade or sell"

I don't really care though, each to their own, as long as he's not trying to market is as being local glass.
 

Jewfen17

New Member
Im not entirely sure I want to sell it I just kinda wanted to get a feel of what its value was in the eyes of others. I wouldn't lie to sell it because that's fucked up but if someone offered me 4 bills for it I would sell it in a second. The glass game in America is fucking retarded right now. Shitty chinese Hitmans sell for 6 bills, and the cheapest custom piece I've ever seen sold at a festival was like $350 and it looked like a piece of shit.
 

virtualpurple

Well-Known Member
It looks pretty sweet, and its a worthy gamble I think with a 99.6% positive feedback. Would have loved to see a function vid on DHgate, but I didn't see one.
 
virtualpurple,

pigfoot

Dabs are vapor too!
@b0 mine was shipped out basically the next day and I got it in 10 days to Canada so my shipping experience does not jive with yours. Also the nut was fine just one dish is too big but having the Infiniti copy makes that a non-issue.

@pigfoot I already messaged the seller about the particap copy and apparently it won't fit. Thanks though. Seems like either the dish or the cap is not a 1 to 1 copy. Maybe both.

I got the hybrid nail, particap clone and standard carb cap. The hybrid nail works great, tastes like my quartz banger. The central threaded tube is not long enough for an enail coil though. The standard carb cap is the same diameter, so it doesn't fit over the nail, it sits on top. Works well like that though. The particap is big enough to fit over the hybrid nail's quartz dish, but it has a an arch-shaped cutout for a honey bucket, which is large enough that it's not blocked when on the hybrid, it lets in too much air to work well. However, the particap is awesome for carbing a banger! Works really well. The dabber shaft is hollow, with two holes on the side of the shaft. Easy to control the airflow.

Kinda looks like a Toro. Looks like they are really trying harder on the percs. This one looks pretty nice. What was the price on that one?

Yup, it's a Toro clone. Looks like it will set you back $40.
 
Last edited:

pigfoot

Dabs are vapor too!
So, the only way to use the hybrid nail is via a torch? That sucks!
Well, it works great with a torch, wouldn't really say it sucks. Also, they never mention enail comparability. The dishes are available for $5/ea, if you have an infiniti clone with similar threads to the nut which holds the dish down, you can make a nail which is definitly enail compatible.

Kinda depends on the dish you get with it. I ordered 2 and one fits and the other doesn't. Luckily they both fit the infiniti copy.

Also they released another version http://www.dhgate.com/store/product/2016-6-in-1-dualiti-enail-ti-qtz-enail-titanium/373183422.html which has more room.

The threading on my hybrid is finer than that on my infiniti clone. Yours is the same? Do you remember which vendor you got it from?
 
Last edited:

weenstoned

Well-Known Member
The threading on my hybrid is finer than that on my infiniti clone. Yours is the same? Do you remember which vendor you got it from?

I got mine from Auber over a year ago when I ordered my e-nail from them. Seems the same as this one but they may have changed the thread size or be from a different factory. http://www.dhgate.com/store/product/wholesale-universal-domeless-titanium-nail/240912559.html

Also just found this http://www.dhgate.com/store/product/2016-hottest-14mm-19mm-female-jointed-colored/373207547.html which is the coloured version that HE offers. Vendor doesn't have the best feedback rating though.
 
weenstoned,
  • Like
Reactions: pigfoot

pigfoot

Dabs are vapor too!
I got mine from Auber over a year ago when I ordered my e-nail from them. Seems the same as this one but they may have changed the thread size or be from a different factory. http://www.dhgate.com/store/product/wholesale-universal-domeless-titanium-nail/240912559.html

The threads in that pic look just like mine, coarser than the dish retaining nut. I messaged the seller, let's see what he has to say about it. I don't think I would trust those colored nails. The original should be anodized, I'm guessing.
 
pigfoot,

weenstoned

Well-Known Member
The threads in that pic look just like mine, coarser than the dish retaining nut. I messaged the seller, let's see what he has to say about it. I don't think I would trust those colored nails. The original should be anodized, I'm guessing.

Ya I dunno about the coloured ones. Though the warning they give about the colour fading over time is also given by HE on their coloured nails.
 
weenstoned,
  • Like
Reactions: pigfoot
Top Bottom