ACE OF VAPE

Vape outside the box
Manufacturer
Has any one out there had any luck fixing there own nano ? Im sure most people haven't tried because opening it would void the warranty. Im wondering if I can save my self the trouble of sending it in.

Somthing is rattling around on the inside and its starting to run hot. This isn't the first time ive had this problem so I was hoping some one out there may have figured out a way to fix it.
You should probably send it in. Get an Rma from the website
 

AJS

Calm Consistency
I feel like if I don't check the Nano forum in a few days, I miss out on everyone's lives! haha
I have to read for 30+ minutes just to catch up on what's going on in the Nano world. I miss being here every day.
Used my friend's Nano with him the other day because I didn't want to bring the LSV, and I sure love the feeling of that wood and the light weight to it. It's amazing that it produces the power it does with being so tiny.
Nancy is put away in my drawer because the LSV is always out taking up my time, but my friend's Nano, Walter, is on my desk 24/7 as my room is the vape room. I need to use it more.
This was my first Nano experience in three weeks, eeeeeek!

To the few people who find themselves currently handicapped, feel better!
To Ataxian....that GonG is packed SO full, omg hahaha. You do you!
 
TyXR1Dd.jpg


I grew up surfing!

Back in the day my nose would drip salt water on my P-JEE Folder!

I shudder to think where else you've stuffed that chillum!! :rofl:
 

Chezgreendream

First the flavor, then the buZzz settles in....
Just wondering do you guys use a grinder for your material or break it by hand. I find it to be better if i hand break it apart. Anyone else experience this?

I find a fine consistent grind works best for me. Benefits of this is, you can fit more flowers in the gong or stem and it vapes more evenly.

If its a fine grind, you can push the screen basket further back, yes you can also fit more, just pack it loosely to avoid drag.

to pack it perfectly loosely, I load the fine grind into the stem/gong and then I take a pull in with my mouth, through the opposite side that I am loading it. I add more if it fits and if I need to line it up, I take something with a flat end and slightly lightly press over the load., I find this gives less draw restriction than just tamping down the whole load with something.
 
Last edited:

ataxian

PALE BLUE DOT
I feel like if I don't check the Nano forum in a few days, I miss out on everyone's lives! haha
I have to read for 30+ minutes just to catch up on what's going on in the Nano world. I miss being here every day.
To the few people who find themselves currently handicapped, feel better!
To Ataxian....that GonG is packed SO full, omg hahaha. You do you!
I am glad your back.
You are so funny!

Back in the 70's we laughed all day.

I love music today and love it yesterday too.

I had a LSV and it was fun and powerful.

The NANO is like GOLDIE LOCKS = just right!

I leave mine on always!

Last month I was a rookie big time!
30 grams for the whole month?
In the 70's every 5 days about 28 grams!
And it was smoked?

Today the flavor is amazing!

The NANO (Nancy) is the best bang for the buck and gets the job done!

I need to order a 18mm GonG's for my devices.

The NANO to me is a well balanced device!

I fill my GonG full without pack medium grind I guess?
 
Last edited:

demonscars

Well-Known Member
Yay just got the email that they received my broken nano and will be fixing it ASAP. Although I did have to respond to take their time, unfortunately I'm going to be traveling for work for about 2 weeks so old or new nano I won't be able to play with either till I get back. Hopefully one of em will be waiting for me though.

I personally use a grinder and then just scoop some up with the gong. I feel like I lose too much of the good stuff when I handle the bud with my hands.

Same here. Not a super fine grind like a MFLB but I like to do a little grind. If I'm using a dry stem I'll just use a tiny nugget and then break it apart a little after a few draws.
 
Last edited by a moderator:

Frandemarco

Active Member
I find a fine consistent grind works best for me. Benefits of this is, you can fit more flowers in the gong or stem and it vapes more evenly.

If its a fine grind, you can push the screen basket further back, yes you can also fit more, just pack it loosely to avoid drag.

to pack it perfectly loosely, I load the fine grind into the stem/gong and then I take a pull in with my mouth, through the opposite side that I am loading it. I add more if it fits, I find this gives less draw restriction than tamping down the load with something.

Thank you bud i will try your method, i think mine screen basket is a little to close to the heater lol
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
Thank you bud i will try your method, i think mine screen basket is a little to close to the heater lol

I will tell you what works best for me. This might not be best for you or your nano (based on how it runs).

I push my screen another 1-2 mm further away from the heater than the default setting.

I use a space case grinder and give my herb a course grind. That is, I pack the grinder then give it three twists. That is enough to tear apart the buds but not into a fine grind. In fact, most of the herb stays in the upper chamber and only a portion drops down into the lower chamber. I then place this ground herb in a small jelly mason jar.

At most I keep about 4-5 grams in the jar. This lasts me several weeks. One gram will last me a week. I vape every night, but I am a lightweight.:)

The rest of my buds remain in larger mason jars with both a Boveda pack and an air-tight lid that you suck much of the air out with the supplied hand pump.
 

Hjalmark

Oldest boy alive
I think a larger bowl may be missing the point of this setup in the first place. The inside diameter is static, so a larger bowl would only mean pushing the screen in (away from the heating element) further, thus increasing the bowl size. This can easily be done with a standard stem, but you will quickly realize the diminishing returns.

This is convection, so the more material, the more resistance. Pushing my screen down (and loading more material) increases the drag way too much to be usable.

I think the standard bowl size as determined by the e-pick is pretty much spot on. In fact, a lot of us push the screen closer to the heating element for more flavor and control.

The purpose of the carb is basically for clearing. I can leave the enano docked and clear my hit by simply releasing my finger versus pulling both the enano and the GonG from my bubbler. The enano heat soaks the material while I recover and exhale, then another hit or two.

yeah I get the point of the heat sink, not talking about 4x the load but more like at least doubling it, sadly I bought only "fixed screen gongs" and already stepped on my straight stem screen so cant play around with "screen length from heating element", but I will when I can :p

I shudder to think where else you've stuffed that chillum!! :rofl:

holy shit I wonder if you could hit salvia in a vaporizer :p :D

Just wondering do you guys use a grinder for your material or break it by hand. I find it to be better if i hand break it apart. Anyone else experience this?

yeah I have a hard time figuring out witch is better but I feel like hand break is nicer for hydro tube and relaxing bubbler moment and fine grind good for a big fast bong rip
 
Hjalmark,
  • Like
Reactions: ataxian

Frostiestone

Well-Known Member
On the topic of grinding, I find anything works as long as you have the E-pic! As the bowl drags on I end up using it as a little knife and dicing up my buds finer and finer and can pull many extra hits from each bowl!

If I start ground up, the hits come hard, fast, and milky. There are less of them but they're dense.

Sometime I toss in a full nuglet ad just session on him for a while, pulling flavorful rips first, slowly poking at him till he mulches himself up, then come the milk shots!

Convection is king!

Heres a video a made on New Years, just an unground 0.065g hunk of some home-grown deliciousness my grower calls "the Funk". Tastes like pine cones! Super dank!

https://vid.me/cPcc

Note: the hits continue for a few more after this, albeit a bit stale.
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
On the topic of grinding, I find anything works as long as you have the E-pic! As the bowl drags on I end up using it as a little knife and dicing up my buds finer and finer and can pull many extra hits from each bowl!

If I start ground up, the hits come hard, fast, and milky. There are less of them but they're dense.

Sometime I toss in a full nuglet ad just session on him for a while, pulling flavorful rips first, slowly poking at him till he mulches himself up, then come the milk shots!

Convection is king!

Heres a video a made on New Years, just an unground 0.065g hunk of some home-grown deliciousness my grower calls "the Funk". Tastes like pine cones! Super dank!

https://vid.me/cPcc

Note: the hits continue for a few more after this, albeit a bit stale.

Nice session! You milked that nug for all it's worth. A chill video to watch :chill:

I didn't realize how many hits you really can get out of a bowl with the nano until recently. I vape mostly at night and blow my hits outside. In the darkness I only see vapor exhaled in the first 3 hits. It wasn't until I used the nano during the day that I noticed how many more hits produce vapor. Your video shows this well.
 

Chezgreendream

First the flavor, then the buZzz settles in....
Nice session! You milked that nug for all it's worth. A chill video to watch :chill:

I didn't realize how many hits you really can get out of a bowl with the nano until recently. I vape mostly at night and blow my hits outside. In the darkness I only see vapor exhaled in the first 3 hits. It wasn't until I used the nano during the day that I noticed how many more hits produce vapor. Your video shows this well.

Visual vapors are always nice, but I must mentioned, I have gotten lit from ghost vapors coming from the nano.
 

Frostiestone

Well-Known Member
Nice session! You milked that nug for all it's worth. A chill video to watch :chill:

I didn't realize how many hits you really can get out of a bowl with the nano until recently. I vape mostly at night and blow my hits outside. In the darkness I only see vapor exhaled in the first 3 hits. It wasn't until I used the nano during the day that I noticed how many more hits produce vapor. Your video shows this well.

Thanks mate! Incredibly enough vapor is produced far after the human eye can see it. I believe @Ratchett showed us this by shining a green laser through his water tool after he thought his bowl stopped producing vapor. Obviously these hits taste like pure abv and aren't the most pleasant, but it just shows how well our little logs can really extract the hell out of our flower :science:

Way too easy

Haha damn, this thread is crawling with innuendo lately!

Visual vapors are always nice, but I must mentioned, I have gotten lit from ghost vapors coming from the nano.

oh yeah, even on low temps at 5-5.5 I get pretty strong effects. I find this temp perfect for a morning run in the freezing cold
 

ataxian

PALE BLUE DOT
I will tell you what works best for me. This might not be best for you or your nano (based on how it runs).
I use a space case grinder and give my herb a course grind. In fact, most of the herb stays in the upper chamber and only a portion drops down into the lower chamber. I then place this ground herb in a small jelly mason jar.

At most I keep about 4-5 grams in the jar. This lasts me several weeks. One gram will last me a week. I vape every night, but I am a lightweight.:)

The rest of my buds remain in larger mason jars with both a Boveda pack and an air-tight lid that you suck much of the air out with the supplied hand pump.

Light weight?
I would love to be a light weight!
Boveda packs are my favorite!

In CA our laws are weird?
Let's say you grow one tree and yield over 2 pounds after trim?
8 oz is all the law allows?
Throwing away 1.5 pounds makes me gringe!

I would love to juice however the laws won't let you?

One OZ is a safe inventory.

The NANO is handling my stupidity?

My jar are full and I have to hold off until end of February to pop seeds?

Colas are keepers and everything else goes in the green trash can!
The only great part is it's free!
 

Frandemarco

Active Member
I will tell you what works best for me. This might not be best for you or your nano (based on how it runs).

I push my screen another 1-2 mm further away from the heater than the default setting.

I use a space case grinder and give my herb a course grind. That is, I pack the grinder then give it three twists. That is enough to tear apart the buds but not into a fine grind. In fact, most of the herb stays in the upper chamber and only a portion drops down into the lower chamber. I then place this ground herb in a small jelly mason jar.

At most I keep about 4-5 grams in the jar. This lasts me several weeks. One gram will last me a week. I vape every night, but I am a lightweight.:)

The rest of my buds remain in larger mason jars with both a Boveda pack and an air-tight lid that you suck much of the air out with the supplied hand pump.

Sweet, but i forgot where the default setting was lol. But yea a gram lasts me a week also since im a lightweight to lol.
 

Hjalmark

Oldest boy alive
Light weight?
I would love to be a light weight!
Boveda packs are my favorite!

In CA our laws are weird?
Let's say you grow one tree and yield over 2 pounds after trim?
8 oz is all the law allows?
Throwing away 1.5 pounds makes me gringe!

I would love to juice however the laws won't let you?

One OZ is a safe inventory.

The NANO is handling my stupidity?

My jar are full and I have to hold off until end of February to pop seeds?

Colas are keepers and everything else goes in the green trash can!
The only great part is it's free!

What if you process the trim straight the day after ?

I personally dont think there should be any limit on amount as there is no limit here in Europe for brewing your own beer, wine and under 30% spirits

Someone told me it was 500 liters but yeah that is fuck more then 8 oz

its fucking fucked how cannabis has to get a crazy special treatment were the plant is followed from seed to seller with numbered codes for each plant until it hits the dispensary and each one has a set amount they can sell or maybe how many customers they can have or something

the alcohol industry BARELY has any over-site compare to cannabis in legal states and one is lethal and the other is non lethal

double standards suck donkey dicks


Sry about the swearing ... had a terrible night sleep of an half an hour and a job interview in 2 hours ... fuck my life
 

ataxian

PALE BLUE DOT
What if you process the trim straight the day after ?

I personally dont think there should be any limit on amount as there is no limit here in Europe for brewing your own beer, wine and under 30% spirits

Someone told me it was 500 liters but yeah that is fuck more then 8 oz

its fucking fucked how cannabis has to get a crazy special treatment were the plant is followed from seed to seller with numbered codes for each plant until it hits the dispensary and each one has a set amount they can sell or maybe how many customers they can have or something

the alcohol industry BARELY has any over-site compare to cannabis in legal states and one is lethal and the other is non lethal

double standards suck donkey dicks


Sry about the swearing ... had a terrible night sleep of an half an hour and a job interview in 2 hours ... fuck my life
Don't worry about strong words.
Their just words expressing a feeling or position.

In our western culture we accepted alcohol over cannabis?
CANNABIS is healthier and safer?
I lived in EUROPE (5 years) and many intellectuals grew and smoked cannabis in private.

Their have been over 10,000 different religions!
Just like CANNABIS?
Many views have been formed as of late concerning CANNABIS!
It's safer than soda?

It grows easily and maybe that's why it's not as profitable as other mainstream recreational substances?

The NANO is cheap and works no BS!
 
Last edited:

j3oomerang

Well-Known Member
looks like I fucked up today because its 9 mm not 12 mm ...... FUCK ... measure TWICE and THEN go on the internet with your big mouth ... ME !

stupid me

but looks like my 14 mm and 18 mm are both 9 mm wide

those pads are 11,67 mm so you need to shave those off with a very fine sand paper and then wash the pad until all dust particles are gone

but at least closest I gotten in pad size

yeah shipping is very expensive on those small items, its a shame because often you just need to pick up a screen or something not a whole vape, I been wondering how you make those or if you could just pick up a small lava



yeah be awesome if someone could check out the prices, I been running around myself online to find some good cheap solutions, I let everyone know if something turns up but starting to look at he "pet shop = lava rock + some work = cheap concentrate screen"

Found some 10mm diameter fritted discs but I'm thinking it will be a hair too tight. What do you guys think? Dont think I have the proper tools to measure myself. Expensive though...

http://www.technicalglass.com/product_pages/fused_quartz_wool/fritted_discs.html
 
j3oomerang,
  • Like
Reactions: Hjalmark

CrimsonKing

The Destroyer Of Worlds
Found some 10mm diameter fritted discs but I'm thinking it will be a hair too tight. What do you guys think? Dont think I have the proper tools to measure myself. Expensive though...

http://www.technicalglass.com/product_pages/fused_quartz_wool/fritted_discs.html

A millimeter is both huge and tiny especially when you are dealing in materials like glass and quartz, not much bend just break. Not to mention the fact that it will be nearly impossible to keep that frit (or any other disk not made of something malleable like metal) true once you start sanding it down to get it to fit in a gong, unless you have some precise and expensive equipment, I would be willing to bet something like that would be much more hassle than the end result was worth. Not to mention the site has a $50 min order :(
 
CrimsonKing,
  • Like
Reactions: Hjalmark

CarolKing

Singer of songs and a vapor connoisseur
@Hjalmark @Bongologist A few users have reported these as working very well
Hercules_SR_Titanium_Coil__22979.1405561269.1280.1280.jpg

From http://www.w9tech.com/hercules-sr-74-titanium-coils/ they just need a little squeeze with some plyers to drop right in to nano gongs or stems, and to pull some of the ti fibers across and cover the hole. Oh and its grade two titanium.
This what I'm going to order for wax and shatter. I bought some crafty oil pads and those need to be cut. I'm also worried about tiny pieces of metal causing slivers or if I breathe it in. I will save the Crafty oil pads for something else.

Edit
I've been using the cotton, it works fine. I wanted to try something else out. Expanding my horizons.
 
Last edited:
Top Bottom