weenstoned
Well-Known Member
Looks like the ball is missing from those pix.
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
loadthetrenchdawg
Well-Known Member
Last edited:
wildything
Well-Known Member
They messed up the second picture was of the coil can, one of the other new diffusion pump designs. Its a nice preview of what else is about to come haha
loadthetrenchdawg
Well-Known Member
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Ime if it's coming out of China it's more than likely that it's already on the market somewhere. The coil is not a new perc, but would be a low diffusion chugger and a poorer perc than the diffusion pump imho.Oh nice! Can't wait to see it function once it hits the market, hopefully soon
@SSVUN~YAH
The Coil Can was designed in our own custom glass ideas thread. To my knowledge no other coiled diffusion pump designs exist, save for the two designed in that thread.
To my knowlege coiled pumps aren't available anywhere yet- it is not known when these designs will be made available in sufficient quality.
There is a water test of the Coil Can prototype seen in that image, and a lot more relevant discussion located in the custom glass ideas thread.
The Coil Can was designed in our own custom glass ideas thread. To my knowledge no other coiled diffusion pump designs exist, save for the two designed in that thread.
To my knowlege coiled pumps aren't available anywhere yet- it is not known when these designs will be made available in sufficient quality.
There is a water test of the Coil Can prototype seen in that image, and a lot more relevant discussion located in the custom glass ideas thread.
Last edited:
pigfoot
Dabs are vapor too!
My orders show that too. I assume this is travel time to the US. The next update will show San Francisco (usually, for me).
Mister G
Deceptively Old Fart
Nobody grabbed the pic of the coil can because it's not on that rattle can page anymore or was it somewhere else?
Edit: My mistake, the pic is still there, I was looking for the "cobra can" no the rattle coil can thingy.
Last edited:
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Ahhh you're correct, I didn't even notice the perc firing upward like the diffusion pump. I stand corrected, I assumed it was the typical old school coil, kudos on the idea.
@redcon
Steven isn't a bad seller. I received a wonky fab egg from CCG that I posted about earlier in the thread. You can get a bad example from any seller.
Steven and CCG are two of the most reliable sellers, but you shouldn't expect perfection from any piece of glass, especially if it's under fifty bucks.
If the CCG Rattle Can really is 14mm, then it looks like it will be much smaller than Stevens.
@weenstoned
If you look closely you'll see there is in fact a ball in the perc, it's just hard to see with the way the photos were taken.
Steven isn't a bad seller. I received a wonky fab egg from CCG that I posted about earlier in the thread. You can get a bad example from any seller.
Steven and CCG are two of the most reliable sellers, but you shouldn't expect perfection from any piece of glass, especially if it's under fifty bucks.
If the CCG Rattle Can really is 14mm, then it looks like it will be much smaller than Stevens.
@weenstoned
If you look closely you'll see there is in fact a ball in the perc, it's just hard to see with the way the photos were taken.
Last edited:
weenstoned
Well-Known Member
Looks like a circle shaped hole to me but I could be wrong. Not in a rush to order but would definitely wanna see a water test first.
@shark sandwich I'm not expecting perfection but the example I received had an obvious flaw that a 20 second QC job would have uncovered so they either aren't checking them very closely, or are checking them and are just saying screw it let's go ahead and send it anyways. Since I've joined the community I've come across a lot of different threads saying he's had some increasingly questionable QC over the past year or so.
I also didn't really like the fact that when I asked Jane a question about if I ordered again would she or someone else make sure it was a better example next time, she didn't do anything to address my question other than reassure me that her company was the best glass seller on DHGate
I also didn't really like the fact that when I asked Jane a question about if I ordered again would she or someone else make sure it was a better example next time, she didn't do anything to address my question other than reassure me that her company was the best glass seller on DHGate
PoopMachine
Well-Known Member
Yeppers!
Cannabis Connoisseur
I LOVE LIFE
Let us know what you think about it
pigfoot
Dabs are vapor too!
Just like to add my thoughts to this discussion. Not discounting your feelings, but from my point of view China glass is one of the best deals on the planet! And I like good deals! You have to remember this stuff is getting shipped half way around the globe. For these prices, there are gonna be corners cut. Others have addressed the cultural differences that make communication a bit....challenging at times. Perhaps there is a different view towards ethical behavior. With that being said, I have enjoyed the hell out of my China glass. I would never have had the chance to own such a variety of glassware otherwise.
No offense, and I mean this sincerely, but if you want perfection - buy from an American artist. These guys do beautiful work, with very high standards. If you want to pay the lowest possible prices, like most of us here, you have to accept imperfections. I've probably bought 8 or 9 pieces now, and all have been functionally fine. Cosmetically they all have some faults. The more complex pieces that need to be carefully aligned, were the worst (still perfectly usable - just not perfectly even), the simpler pieces were mostly fine.
I kind of expect there to be minor imperfections. If I really like the piece, but got what I think is a poor example, I sell or give it away, and order again. People around here are de-lighted to get functional glassware for these prices.
To respond to your points, do they QC their stuff? I would say minimally at best. Is that intentional? Yup, in my opinion, they are making the stuff quick and dirty, with the knowledge the customer may just accept it, rather than dealing with a return situation. Are they gonna "cherry pick" a nice unit for you? No. That would be cool, and I would pay extra for it, but probably not gonna happen. I've got an FC-710 and a mini straight fab on the way from Steven. Never ordered from him before, and haven't seen many negative experiences, but I haven't been following this thread 100%. In the past, I've ordered from Kathy, Sunshinestore, and Yingmin. Honestly, in my experience, they were pretty similar.
I think everyone is misinterpreting my dissatisfaction.
I am just like everyone else here: I think it's a great deal and I will continue to order more. I would never spend the money it would cost to have a few heady American made glass pieces, so I love this China glass route.
I've also ordered plenty of non-glass direct from China products before, so expected the lottery and wouldn't have laid out the money if it wasn't something I could stomach even if it was a total bust.
Maybe it's just because it was my first order so I don't have a baseline. Even though I haven't had to use it in action, I am very happy with the FC-710 I received from Steven, and I am sure I will order another piece from Steven in the next 12 months.
I'm just saying if Seller A, Seller B, and Seller C all offer the same product and I have already had less than great (not horrible) experience with Seller A, why wouldn't I be inclined to give Seller B or Seller C a shot?
Back to more important things... How do you guys think the Rattle Can would perform with an Underdog?
I am just like everyone else here: I think it's a great deal and I will continue to order more. I would never spend the money it would cost to have a few heady American made glass pieces, so I love this China glass route.
I've also ordered plenty of non-glass direct from China products before, so expected the lottery and wouldn't have laid out the money if it wasn't something I could stomach even if it was a total bust.
Maybe it's just because it was my first order so I don't have a baseline. Even though I haven't had to use it in action, I am very happy with the FC-710 I received from Steven, and I am sure I will order another piece from Steven in the next 12 months.
I'm just saying if Seller A, Seller B, and Seller C all offer the same product and I have already had less than great (not horrible) experience with Seller A, why wouldn't I be inclined to give Seller B or Seller C a shot?
Back to more important things... How do you guys think the Rattle Can would perform with an Underdog?
jds32
Well-Known Member
Shouldn't the angle of the air path exit from the coil be the same as the exit from the standard diffusion pump?Is it just me or is the second some sort of spiral diffusion pump?
Likes2vape
Well-Known Member
The one from CCG is 14mm for sure I just talked to them. The one from Steven is 18mm though.
They said they will consider seriously the suggestion when I asked them about it.
Last edited:
@Likes2vape did they indicate if they are considering developing an 18.8mm version?
Likes2vape
Well-Known Member
I was editing my post above as you were posting!!! Haha.. It seems like they might make it in 18mm and slightly bigger but it would probably be after they sell out of these.
I wonder who's gonna be the first FC member to get the rattle can from CCG? It looks like it would make a nice little travel rig!
Likes2vape
Well-Known Member
I just got a message from CCG that they will make the rattle can in 18.8mm you just have to send them a message when you order.
FYI SSS has the rattle can listed as well now.
tepictoton
Well-Known Member
Both ccg and sss versions seem to be sealed at the bottom...? Would this not influence function of the ball... Hihi non-rattle cans?