Divine Tribe atty's

Haywood

Onward Thru the Fog
In case you haven't had time to read the whole (getting deservedly long) thread, I seem to recall that 10W-12W is the recommended power. Be careful of running it much higher, even when you're cleaning it. I blew out one of mine by excessive duration heating at 15W.
 

Hoosier

Well-Known Member
In case you haven't had time to read the whole (getting deservedly long) thread, I seem to recall that 10W-12W is the recommended power. Be careful of running it much higher, even when you're cleaning it. I blew out one of mine by excessive duration heating at 15W.
Been there and done that! Unfortunately, a nice hot glow at 16w is what it takes to get mine to the cleanliness I like. Thankfully, now that they can be found for $10-12, it's not that big of a deal.
 
In case you haven't had time to read the whole (getting deservedly long) thread, I seem to recall that 10W-12W is the recommended power. Be careful of running it much higher, even when you're cleaning it. I blew out one of mine by excessive duration heating at 15W.
For the donut, yes. The new endeavor, the DC, is matt's (in conjunction with szcrossing) ceramic dry herb vape that is due to arrive soon. I imagine the larger element may operate a little different than the donut, but I suppose keeping the wattage low is a good call regardless.
 
ragnorokk,

Steven

Well-Known Member
Been there and done that! Unfortunately, a nice hot glow at 16w is what it takes to get mine to the cleanliness I like. Thankfully, now that they can be found for $10-12, it's not that big of a deal.

If you are referring to the regular dt donut, you can get it clean white at safer settings Imo. I use the TC invader mini and I keep the Wattage locked in at 11.5 w. I generally vape at 300f. As for cleaning, I bump the temp up to 400f, flip it upside down, press and repress the fire button so the donut is constantly firing for like 30 sec to a minute. Also, use a napkin or q tip to absorb all the reclaim while upside down and firing. My dt donut is clean white after a few bowls. The donut is crackable at 16w, but not at 11.5w. I've fired the donut constantly for a minute at a time multiple times daily. Resistance still reads at 0.71 when at room temp and I get a clean white donut on the daily. Every other day, I would remove the atty right after cleaning and while it's hot, cover the outer side air holes, and blow from the bottom to clear the holes and to cool the coil down. I never get clogs or leaks ever with my regiment and my donut lasts forever

Note: settings are only good for resistance ranges about 0.70-0.74. Any higher resistance, the donut will get too hot
 
Last edited:
Steven,

Darb

Well-Known Member
I run my donut at 20+ volts. I know it isn't recommended and I'm not suggesting that anyone else do it either. I've been running approx .5 through it daily at those voltages for months but I don't hold the button for very long.
 
Darb,

Steven

Well-Known Member
I run my donut at 20+ volts. I know it isn't recommended and I'm not suggesting that anyone else do it either. I've been running approx .5 through it daily at those voltages for months but I don't hold the button for very long.
Really? Did you mean 20+ watts by chance? When I used a vv mod on the v1 donut, I think 4.2 volts was my sweet spot. I would think 20+ v would crack the donut. Oh what may answer all my questions is what is your resistance reading for your donut? Btw not saying my way is better. Sounds like you know what you are doing and what your doing works for you
 
Steven,
  • Like
Reactions: Darb

skyler544

Clockwork Murderer
I use 14w for nice big clouds, though it can get pretty hot after three or four long drags. I find that shatter works far better than crumble, and lasts longer as well.
 
skyler544,
Ok, so Tucker @ ineedhemp emailed me back. They currently recommend 20-40w for the DC herb vape when it comes out (soon!).

Don't forget to check your wattage when you switch between oil and green, cause the DT 2.5 won't be happy if you absentmindedly take a nice long, fat rip @ 40w!
 
ragnorokk,

Steven

Well-Known Member
check out what I found on ebay. what do you think about this disc

http://www.ebay.com/itm/Sub-Ohm-Cer...697466?hash=item43e808c43a:g:9q4AAOSwZG9WhqOp

This new ceramic plate has caught my interest as well. There are some companies that are rolling out with these ceramic plates. There's even a bigger plate for dry herb. I actually emailed Matt if ceramic plates are going to be available for the v3. However, this was the first time Matt did not respond back to me. Instead it was one of his employees or something of that sort, who just kinda brushed me off saying if they can figure out airflow issues with the plate. That reply didn't Make sense to me.
The thing is basically a ceramic nail it seems. Someone try this bad boy out and report back. I would have got it if it was a deep bowl. I prefer the airflow on the deep bowls way more
 
This new ceramic plate has caught my interest as well. There are some companies that are rolling out with these ceramic plates. There's even a bigger plate for dry herb. I actually emailed Matt if ceramic plates are going to be available for the v3. However, this was the first time Matt did not respond back to me. Instead it was one of his employees or something of that sort, who just kinda brushed me off saying if they can figure out airflow issues with the plate. That reply didn't Make sense to me.
The thing is basically a ceramic nail it seems. Someone try this bad boy out and report back. I would have got it if it was a deep bowl. I prefer the airflow on the deep bowls way more
Yeah, Tucker has been my point of contact any time I emailed over the past few months.

Also, I agree a plate makes significantly more sense than the donut, assuming someone can figure out how to get proper airflow.
 
ragnorokk,

Steven

Well-Known Member
Yeah, Tucker has been my point of contact any time I emailed over the past few months.

Also, I agree a plate makes significantly more sense than the donut, assuming someone can figure out how to get proper airflow.
That's the response that I do not understand. Problem with airflow? In all the donut versions, the airholes are above the heating element. Meaning whether if it's a donut or a plate, airflow should be identical. Unless v3 has airflow coming from underneath the coil. Seems like it should just be a simple swap of donut to plate. What airflow issues?
 
Steven,
That's the response that I do not understand. Problem with airflow? In all the donut versions, the airholes are above the heating element. Meaning whether if it's a donut or a plate, airflow should be identical. Unless v3 has airflow coming from underneath the coil. Seems like it should just be a simple swap of donut to plate. What airflow issues?
Only @divinetribe knows for sure.
 
ragnorokk,

AnthoFranco

Well-Known Member
you know your doing it right when these guys pick up some designs.
https://www.fasttech.com/products/3020/10018706/3897500

note the hole less ceramic disc and lack of air holes in the 510 base.

i wonder if this is the V2.7 that did not get released on DT's website?

Yep, that's the guy. IMO we could use a whole lot more like him.....and a few less of the other type. He's looking to provide the best possible product, not make a big profit as quickly/easily as possible.
my neck hurts from agreeing so much. lol,jk . i bought a quartz banger from him and it was here in a few days. great service great price, easy peazy.

i think the best way to vape concentrates. imo
for on the GO FasHo! but i bang that sh*t when in @ home, Yo!!!

look forward to new 2016 releases!!

@kernal6500 that price tho.......
 
AnthoFranco,
  • Like
Reactions: OF

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
it's here the 1st gen dry herb DC, mention fuck combustion get it for $24
i can send you a paypal request. just email me instead of buying from site.

matt@ineedhemp.com

rx200 batteries coming in on monday along with Imren 40a 3200mah cells. thats my new recommendation for the dry herb so i invested in those to make a complete kit.. also i have a new drip tip mouthpiece for the v2.5 , I am making the ad for those today. I am calling it the v2.7 nothing in the base is different just the mouthpiece and a whole new wide mouth look
Any direct questions please feel free to email me. I have not been able to get on this blog as much as I like.
the v3 is pretty much done I just need to come up with some branding for the ceramic housing. It will get copied quickly the new prototype was delayed a week I am still waiting to test it myself.. again in the v3 the donut is twice the size of the v2.5 and will use more power. My goal is to get the biggest vapor desired with the cleanest flavor, no splash, no leakage, and no waste. the v3 does not accomplish all that yet so the v4 is in drafting phase. the v3 will be the last of the donut design maybe.. i am going with 2 plates that both heat and allow the concentrate to splash back and forth to each plate. the mouthpiece will not be where you load it. there will be a side pull out ceramic tray that when inserted into the atomizer wall will center directly between the two plates(same tech as the donut just a different shape. )

thanks for all the support
I will be posting some pics on this blog here later today hopefully
matt macosko

matt@ineedhemp.com
 

Steven

Well-Known Member
Whew, with all this tip toeing around about ceramic plates, I'm astonished that Matt has already have a design for these plates. Gotta love that Divine tribe ingenuity. Love the total rebuild ideas. Loading wax sounds like it will be done effortlessly fast now. However, I wonder if the sliding tray will get stuck after few hits. Overall, it sounds like a game changer
 
Steven,

Tstat

Dead Foot Designs
Accessory Maker
So, I've used the Persei Herculese setup for a while with mixed results. It seemed to screw up at the most inopportune times. I lost it and replaced it with a Puffco pen. I like it but the coil is caked and I need to buy a new one.

That said, this thread has caught my eye. I'm looking for something for shatter. I make a lot of Everclear extract and I'm looking for a DT recommendation. Maximum flavor, holds a lot, reliable. Any suggestions?
 
Tstat,

Steven

Well-Known Member
So, I've used the Persei Herculese setup for a while with mixed results. It seemed to screw up at the most inopportune times. I lost it and replaced it with a Puffco pen. I like it but the coil is caked and I need to buy a new one.

That said, this thread has caught my eye. I'm looking for something for shatter. I make a lot of Everclear extract and I'm looking for a DT recommendation. Maximum flavor, holds a lot, reliable. Any suggestions?
The v2.5 donut is more of a layg atty. But it hits all your other requirements with flying colors. Plus there's new versions every few months
 

nickzzzx

Well-Known Member
For that Fasstech product, I wonder how that flat ceramic plate performs compared to the donut. Mainly I want to know if oil will leak off the sides and pool below, or will it just sit on the plate like it was designed for.
 
For that Fasstech product, I wonder how that flat ceramic plate performs compared to the donut. Mainly I want to know if oil will leak off the sides and pool below, or will it just sit on the plate like it was designed for.
Warm oil on a flat surface with even the slightest of space between ceramic parts (plate and skillet) will drip down. If there is no (or insufficient) airflow UNDER the disc, and/or the disc is too far off the bottom of the skillet it's enclosed in, what drips down won't vape and you'll get a puddle of dark decarbed crap under the heater. That's the problem I've had with all my donut atomizers, too. I'm not saying it will be impossible to use, just that it will likely suffer from the same issues as a donut (but still have increased surfaced area and allow you to put your dab in the very center, so would certainly be worth looking into). Someone will get it right eventually, but it seems implausible that it will be leak-proof right off the bat, except for ultra tiny dabs right in the very center, that completely vaporize.
 
ragnorokk,
  • Like
Reactions: nickzzzx
Top Bottom