• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

ataxian

PALE BLUE DOT
Not a bad dilemma to have, for sure.

You have a lot of great strains to chose from. I wish I could get some GDP. That is the strain I probably want most of all. GDP through my water pipe with the nano would be heaven I'm sure.

When I clean my adjustable gong, I pop out the screen, drop the gong in the plastic container and fill with iso. Around a half hour later I take it out, run a Q-tip through it and give a rinse in hot water. The basket screen I blast with a kitchen torch until it burns off all residue and glows red. A quick blow of air to clear any ash and it's ready to put back in the gong.

For the water pipe, I add a few tablespoons of kosher salt and about 1/2 cup of iso. I shake it up a few times and let it sit for a half hour also. One more shake, then rinse well with hot water and it is sparkling clean. Just my technique.
I need to order more GonG's.

I have too many water pipes!
The NANO and GDP = Taste

I have been vaping GDP for 5 years.

1/4 OZ every month = taste great!

GIRL SCOUT COOKIES I love the Effect and the flavors not bad!
Now BLUE DREAM I love the taste but the effect is not the one for me.

GODS GIFT OG = Laughter
MAUI WOOWIE = Zone
DUTCH TREAT = Flavor/Effect
SNOOP DOGGY PURPLE KUSH = Effect/Love da FLAVOR
DEATH STAR = Heavy MEDICATION
CACTUS COOLER = PINEAPPLE ORANGE like the drink however kind of soaring!
LEMON DROPS OG = RUINS your mouth!
STRAWBERRY COUGH = CREEPER

What I love about the NANO is the flavor profile of the COLAS is spot on!

I love cannabis!

@Enchantre my wife hates anything that covers the floor.

She makes me buy 4 GonG's at a time!

She say's, "I break glass"?
 
Last edited:

Hjalmark

Oldest boy alive
Anyone know if FCLOVE works for international shipping ?

Trying to order 5x basket screens and I apply the code and it shows up as "FCLOVE - Free shipping coupon" but still 17 dollars for shipping and I cant take the x away and even though I go over to PAYPAL its still 22 dollars for 5x basket screens that cost a dollar each and weight next to nothing

So pissed at myself for forgetting to order extra screens with the Enano ... think you should at least get 2 spares with the vape instead of just one :/


Wondering if anyone has any idea ...
 

CarolKing

Singer of songs and a vapor connoisseur
I don't think international shipping is included with FClove. You could also give them a call at Epicvape on Monday Pacific time on the West Coast, they are located in California. Maybe Andy could figure something out.
 

Hjalmark

Oldest boy alive
I don't think international shipping is included with FClove. You could also give them a call at Epicvape on Monday Pacific time on the West Coast, they are located in California. Maybe Andy could figure something out.
yeah nah I was kind of trying to ask them to send 5x with my pick and I would pay for it but I was very passive about it because knew they were busy as hell around the xmas ... maybe passive aggressive =) but I was a bit disappointed when I did not get it when I received the epick couple of weeks later and noted that in a bottom of a email very ... wooshy like but dont wanna do anything more

yes an I know Andy reads this forum :D :/ reason why I added (aggressive) to my passive state

#andythetruesanta

On other notes I have not found a cannabis product that this vape cant turn into beautiful milky clouds except cannabis infused coconut oil ... or any edible because that would just be stupid

read a post somewhere about a man that tried to roll up a brownie =>
 

Hjalmark

Oldest boy alive
Ive been loving my enano and the efficiency is great. Ive finally found my perfect temp around 6.75 and 7.5 to finish it off. Now with me at 8-10 second draws im well off after only three loads.

How about you guys how many loads do it take for u

1-2 at 7 or couple more at 6 but depends what I am looking for

been vaping hash in it recently and notice I get like 6-8 hits from 8 and pretty much sit and chill for 10 min with it on 6-7 and flavor stays amazing until the end
 

Eyedunno

Well-Known Member
By the way @Hjalmark , I just saw your million dollar bag vape idea. I do think it's a great idea. Of course the bag might have to be small to accommodate the small load size, but I still love the idea.
 

Hjalmark

Oldest boy alive
By the way @Hjalmark , I just saw your million dollar bag vape idea. I do think it's a great idea. Of course the bag might have to be small to accommodate the small load size, but I still love the idea.

thanks a trillion ! I am going to proto type it soon but I got some other projects that take priority :p

1) lid over green house water tank (0% done)
2) finish hanging wall aquarium filter (40% done)
3) new body for davinci ascent interior (20% done)
4) lathe out a disc for "Enano balloon attachment" (0% just found a wood shop lathe I can borrow)
5) soil temperature sensor and data logger for compost piles (20%)
6) mobile green house for spring (60% done)

so now I need some stainless steel tubes for both the Ascent design and the Enano balloon attachment, need to get both 4mm and then 3 different sizes for my idea of he new Davinci ascent, also looking around for clay that would serve as oven insulation, also need to get a better saw and some sand paper before I can finish the ascent body but I am looking around for wood and then visiting a wood shop I might be able to use for couple of days, they have the tools I am missing like a lathe and belt sander so I can do the Enano balloon attachment.

so this is my list for next 2 and a half month + some other stuff and then in in middle of Mars I need to have done at least half of a chicken house we are planning to build + all the presowing for my vegetable farm and tomatoes/cucumber/peppers for the green house

so sometimes my projects get left behind a bit but I will actually do the Enano balloon attachment because its a easy enough project for my lathe skills (not touch one for 15 years)
 

demonscars

Well-Known Member
I'm definitely having e-nano withdrawals. My mflb backup isn't in the same league unfortunately. And my lungs don't like combustion at all (nor do housemates). I even dropped them a line to upgrade to the more expensive shipping option to get my new baby in my hands as soon as possible. There's nothing like a warm nano on a cold night. Literally will warm a room while still being cool enough to touch/use.
 

CarolKing

Singer of songs and a vapor connoisseur
Last April I bought a premium cherry Enano, after about 5 days the wood started to split. There's no way a head of time to know if something like that is going to happen. So I sent the first one back and Andy (Nadia) sent me a second unit. The second cherry unit was even more beautiful than the first one.

I didnt want to be Nano-less, so before sending the cherry unit back I bought a premium walnut unit. I waited to send my cherry unit back because it was still usable until the walnut unit came.

My suggestion is everyone needs to have 2 Enanos, just in case one needs servicing, you have a backup.

Just starting a session of Blue Rhino, a very nice nighttime strain. Part White Rhino and Blueberry Indica. Need to melt the pain away and just relax. I don't drink wine but I like the idea of different strains of cannabis are like different types of wine. I think this would be considered a fine wine type of strain. My temperature is on 6.25 - flavor all the way.

I received my 2 Black Leaf J hooks today from PV, I will try it out later with my GonG. I got Ketchup Potato Chips with mine. I can't find them around my area.

The Crafty oil pad is slightly too big as @Melting Pot said. The oil pad that he had a picture of would work out better. I will save these for another vaporizer.
 
Last edited:

CarbonFiberGuy

Well-Known Member
I received my nano a couple days before Christmas , so I have had some of time to play with it . I'm really happy with my purchase . Coming from a collection of all portables , the on-demand aspect of it has made it my go to vape always ready for a quick tasty rip . The quality and build of the unit and the glass pieces is very good . I ordered more stems and gongs immediately after I received my order because I was impressed with the glass . I decided right away I like the adjustable stems vs the all glass . it is very thick compared to the arizer pieces that I am used to .

The nano pairs nicely with The FC-187 ,but You have to pull the stem with the nano or your load will pop out with back pressure . I recently received this piece
http://www.dhgate.com/product/hot-s...lator/228923897.html#s1-0-1b;searl|2010851811
which is probably my favorite with the nano so far , I got the six arm version , My 18mm gong sits so nice in it and all I have to do is pull of the nano after the hit ,there is not enough pressure to pop the load , it is a very nice piece for $16 and not having to pull the stem with the nano to clear is very nice . I also have a Fc-mod on the way so I am looking forward to hooking the nano up to that .

My only concern is my black base on the unit is slightly off center . like if you look down at the unit standing up the black base is sticking out about 1/16'' on one side and not showing at all on the other . Also if you shine a light down the heating core stem you can see the ceramic core is resting on one side of the steel tube and has a large gap on the other side . I also notice that the side with more air flow leaves my load a little lighter on that side . This can be prevented by twisting the stem or nano . I'm pretty sure my misalignied base and ceramic core go hand in hand . The nano also fits alittle tight in my aluminum epic stand base I purchased from them , Which I think is because of this misaligned base .

I'm wondering Is this common with the nano , and I'm just over looking it ? Do you guys think I should contact epic , or is this normal build ? It is a beast even with these slight defects
 
Last edited:

CarolKing

Singer of songs and a vapor connoisseur
@CarbonFiberGuy if it's a concern to you contact Epicvape. It won't be so busy after a few weeks. Turn around time when not so busy would be about 2 weeks. You need to be 100% happy with your unit.

If you decide that it's something you can't live with, I would ask for a label to send it back.
 

Bongologist

JoJo Woodworks
Accessory Maker
@CarbonFiberGuy glad you like the nano, it's a great vaporizer. You might want to look at the carb adapter from oregonglassblower.com (also his user name here). It's become one of my favorite pieces of glass and easily moves from bong to bong. Here it is with my FC-Mod and HT combo.
Pbwv3jp.jpg
 

ACE OF VAPE

Vape outside the box
Manufacturer
I received my nano a couple days before Christmas , so I have had some of time to play with it . I'm really happy with my purchase . Coming from a collection of all portables , the on-demand aspect of it as made it my go to vape always ready for a quick tasty rip . The quality and build of the unit and the glass pieces is very good . I ordered more stems and gongs immediately after I received my order because I was impressed with the glass . I decided right away I like the adjustable stems vs the all glass . it is very thick compared to the arizer pieces that I am used to .

The nano pairs nicely with The FC-187 ,but You have to pull the stem with the nano or your load will pop out with back pressure . I recently received this piece
http://www.dhgate.com/product/hot-s...lator/228923897.html#s1-0-1b;searl|2010851811
which is probably my favorite with the nano so far , I got the six arm version , My 18mm gong sits so nice in it and all I have to do is pull off the nano after the hit ,there is not enough pressure to pop the load , it is a very nice piece for $16 and not having to pull the stem with the nano to clear is very nice . I also have a Fc-mod on the way so I am looking forward to hooking the nano up to that .

My only concern is my black base on the unit is slightly off center . If you look down at the unit while it is standing up , the black base is sticking out about 1/16'' on one side and not showing at all on the other . Also if you shine a light down the heating core stem you can see the ceramic core is resting on one side of the steel tube and has a large gap on the other side . I also notice that the side with more air flow leaves my load a little lighter on that side . This can be prevented by twisting the stem or nano . I'm pretty sure my misalignied base and ceramic core go hand in hand . The nano also fits a little tight in my aluminum epic stand base I purchased from them , Which I think is because of this misaligned base .

I'm wondering Is this common with the nano , and I'm just over looking it ? Do you guys think I should contact Ace of Vapes or Epic , or is this normal build ? It is a beast even with these slight defects
Glad you are happy with your purchase. The ceramic rod touching the side is normal. The off-center base is not. Get an RMA and send it back when you have time and I will align it, and send you a free glass stem for your trouble.
Andy
 

CarbonFiberGuy

Well-Known Member
@CarbonFiberGuy if it's a concern to you contact Epicvape. It won't be so busy after a few weeks. Turn around time when not so busy would be about 2 weeks. You need to be 100% happy with your unit.

If you decide that it's something you can't live with, I would ask for a label to send it back.
Glad you are happy with your purchase. The ceramic rod touching the side is normal. The off-center base is not. Get an RMA and send it back when you have time and I will align it, and send you a free glass stem for your trouble.
Andy

Wow thank you for your fast responses , It is nice to be part of the nano family :) . Thank you Andy I will get a RMA and send the unit in for a tweek . With how fast I've received my recent orders I'm sure it will be a quick turnaround . I really could not be happier with the unit or Epic otherwise :clap:


@CarbonFiberGuy glad you like the nano, it's a great vaporizer. You might want to look at the carb adapter from oregonglassblower.com (also his user name here). It's become one of my favorite pieces of glass and easily moves from bong to bong. Here it is with my FC-Mod and HT combo.
Pbwv3jp.jpg

Thank you Bongologist , This picture is what actualy made me buy the FC-mod , and that recycler tube :D. I saw your post when you posted it in the glass thread . I think this setup will work perfect in my new nano vape station which has a lower table . I also have a planet vape F-bomb that I bought a 14mm reducer to try as a mouthpiece . From this lower surface I have to pick up the FC-187 and hold it which makes it a little akward to pull the stem with the nano . I'm just not used to the lose stem on the nano yet but I'm getting the hang of it . I was actually researching on my own trying to find that carb adapter from oregonglassblower.com for days lol . I did find it on my own however a few days ago ,and have been deciding between this and the cloud buddy from vapexhale . Do you find the 10mm carb sufficient for clearing most your bigger pieces ?
 

Bongologist

JoJo Woodworks
Accessory Maker
I had really thought about asking for a larger carb opening (14mm) but after a few months I find the 10mm to be great. I just tried a cheap claisen with an 18mm opening and there is barely a difference, the OGB one is lower profile, and the carb cap is much nicer. I like using a variety of pieces and the ogb carb is so nice I'm ordering a second. So yeah, worth it.
 

GetLeft

Well-Known Member
Coming from a collection of all portables , the on-demand aspect of it has made it my go to vape always ready for a quick tasty rip .

Right there with you mate. The nano is the vape that fully fledged me. Made me a vaper. I hesitated and hesitated with my purchase because it was a 'plug in' and I had to be 'flexible' and 'stealth'. But man, within a week it was my automatic due to it's one-hit effectiveness. Cool place to let it set and it's there whenever you need it, quickly and as powerfully as you need it to be. The only adviseable precaution I'd have in making the transition to the nano as your stand by (if you're coming from a portable) is that remember it hits. Be ready to be higher quicker.

My suggestion is everyone needs to have 2 Enanos, just in case one needs servicing, you have a backup.

Yeah man. I'm not there yet but I've been trigger happy for a while for a back up chord at least. Everything's holding up rock solid on my maple since I got it in June. Not like I'm modeling good behavior, but that's with no other care than cleaning stems gongs and screens, all of which is a breeze to do. I'll be looking at some wood conditioner soon now but the finish is holding up really well so far as far as I can tell.

Love my nano.
And I think I always will.
 

Hjalmark

Oldest boy alive
YoAll

was wondering because I been vapin alot of hash in my Enano, totally hits like a beast by just putting couple of tiny bits on the screen that I squeezed together into a plate for the bottom of gong, then I leave the enano on 8 on top of bong gong for about a 1min and hit it

totally the thickest rips I ever gotten on a vape and looks like the subliminator !

but anyway the screen over heating element is getting very dirty, is it okey to have the unit off and hold it upside down while I dab a really wet ISO qtip on the end to get the hash left overs off ???

been leaving it on 10 for couple of hours but still not enough and worried I am going to clock it

any gotten hash stuck on heating element screen?
 

CarolKing

Singer of songs and a vapor connoisseur
Try wrapping your hash in cotton or in cannabis. I just bought a couple of J Hooks and the Enano is used hamster style, like with a bubbler. That might be easier on the unit. The heater is above the GonG. Lovin vaporizing with the J Hook. I bought them from Planetvape, they came in perfect condition.
 

Chezgreendream

First the flavor, then the buZzz settles in....
YoAll

was wondering because I been vapin alot of hash in my Enano, totally hits like a beast by just putting couple of tiny bits on the screen that I squeezed together into a plate for the bottom of gong, then I leave the enano on 8 on top of bong gong for about a 1min and hit it

totally the thickest rips I ever gotten on a vape and looks like the subliminator !

but anyway the screen over heating element is getting very dirty, is it okey to have the unit off and hold it upside down while I dab a really wet ISO qtip on the end to get the hash left overs off ???

been leaving it on 10 for couple of hours but still not enough and worried I am going to clock it

any gotten hash stuck on heating element screen?

I have had concentrate stains on the heating element, I have left the unit on 10 for half an hour and then turn it off, wait a few seconds and rub a damp rag and what ever was on it has come right off if thats what you mean.

**EDIT**Ok I just reread it, you mentioned you wanted to save what was leftover, disreguard then.
 

grassman

Well-Known Member
Wish I would have found this vape sooner and wish I would have seen the promo codes before I placed my order. Went from solo to mighty and currently picked up a firefly just looking to conserve. Mighty goes through more weed than smoking, but it works so good. Looking forward to receiving this little device. The promo codes for those waiting to pull the trigger are VAPECRITIC10 for 10% off and FCLOVE for free shipping. I checked and they both work but you can only use one. The Vape critic guy gives good reviews too. Been reading this thread for a while and lots of cool people on here, Thanks for all the useful info. Sucks I didn't find these in time but at least I'm passing on the good karma..
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
Wish I would have found this vape sooner and wish I would have seen the promo codes before I placed my order. Went from solo to mighty and currently picked up a firefly just looking to conserve. Mighty goes through more weed than smoking, but it works so good. Looking forward to receiving this little device. The promo codes for those waiting to pull the trigger are VAPECRITIC10 for 10% off and FCLOVE for free shipping. I checked and they both work but you can only use one. The Vape critic guy gives good reviews too. Been reading this thread for a while and lots of cool people on here, Thanks for all the useful info. Sucks I didn't find these in time but at least I'm passing on the good karma..

I would have a much different arsenal of vaporizers if I waited until now to buy anything (no, not you Mr. Nano :lol:). We all need to learn and experience along the way.

Old vapes make great paperweights.

I like the vape critic also and found that he gave a very favorable review of the nano also. There were some points that were up for argument, but you could tell that he was impressed by the device.
 

Hjalmark

Oldest boy alive
Try wrapping your hash in cotton or in cannabis. I just bought a couple of J Hooks and the Enano is used hamster style, like with a bubbler. That might be easier on the unit. The heater is above the GonG. Lovin vaporizing with the J Hook. I bought them from Planetvape, they came in perfect condition.


I manage to get the hash off the heating element and yeah I am looking into getting a stainless steel wool instead of cotton because I feel like I could find other more suitable plant fibers in the summer time and the steel wool would last so long and useful for many things around the farm :D

like cleaning old paint and rust off from stuff garden tools :p for starter :D

pretty sure I seen some wild cotton growing around the farm and also herbs that are perfect tobacco substitutes, me and 2 other friends are opening a online headshop here in Sweden in couple of months and will feature some stuff specially aimed towards vaporizers so I will start a page somewhere on the forum for some information and place for people to post ideas for products they think they need

also going to have couple of "limited numbers run" on obscure stuff people often like to have in their arsenal just because we have some people on the team that like to make stuff
 
Top Bottom