Discontinued The Persei Vaporizer for herbs and concentrates.

DaNi_DuB · Dec 31, 2015

Na, just braided them together all the way thru. If you have the tools to do it though, I would definitely recommend pinching the NiChrome to non res wire.

Dr. Soxhlet · Dec 31, 2015

Thank you so much Samurai Sam for the extra effort getting a Christmas gift resent on time after a part was missing. Was pleased to find some extras in the package. This kind of attention to customer satisfaction is another good reason to remain loyal to this brand. Top quality innovative products and stellar customer service, very satisfied!!

arrr · Dec 31, 2015

THC SCIENTIFIC said:
We are slowly phasing in deeper coils to help with a splash guard. The reason we don't add a physical splash guard is because it gets dirty with oil and gets stuck, just not worth it to have a splash guard you need to take off consistently to load. People who quickly use one will realize that it is a pain in the ass and not worth the benefit when better designs are out there.

How about incorporating a splash guard on the top cap. Or something on the top cap to make the splash area smaller thus easier to clean/reclaim.

DaNi_DuB · Dec 31, 2015

THC SCIENTIFIC said:
And yet again another side note.

I wanted to say that we are working on a bigger version of the Bender, a stand along unit that is not like the current one that will work on the 2x18650 8 vaporizer.

We just received the one part that took us 1 year to perfect, and already have the other parts and now just waiting for the circuit board.

Hmmm.... the bender will change to a stand alone unit & it seems like the sr74 is going to look pretty goofy in the "new" 8....a new cartridge on the horizon maybe?

SamuraiSam · Dec 31, 2015

TelFiRE said:
Do you have any idea when new Nibbler XLs would be in stock?

Get them while they're here this year, we have four Nibbler XL's back in stock at w9tech.com

THC SCIENTIFIC · Dec 31, 2015

From the bottom of our hearts here at Up Tech we would like to say thank you for everyone for your support. Without your vigilant critique and support we would not have reached our next milestone in our quest for the perfect vaporizer. Happy New Year everyone may the new year bring every one their wishes.

Hye life is the only life for me.

SamuraiSam · Dec 31, 2015

As the sun sets on 2015 I'm sure happy to have spent it with this crew, and this vape.

Here's to next year's sunsets.

TelFiRE · Jan 1, 2016

SamuraiSam said:
Get them while they're here this year, we have four Nibbler XL's back in stock at w9tech.com

Damn the timing! I'm headed out of town tomorrow and it appears there's no way to order to the address I'll be at since it's not the address on my card.

THC SCIENTIFIC · Jan 1, 2016

TelFiRE said:
Damn the timing! I'm headed out of town tomorrow and it appears there's no way to order to the address I'll be at since it's not the address on my card.

You can add the address to your cc and use it as billing and shipping.

TelFiRE · Jan 1, 2016

Good idea, but I think it confused the systems. I got "This transaction has been declined." But, that's definitely not the case. I currently have 6 copies of the charge pending :/

SamuraiSam · Jan 2, 2016

Most likely you didn't wait long enough after changing addresses to put the order in. It usually takes 24-48 hours for card processors to be able to see an address changed, so try again in a day or two.

This is what occurs on over 95% of our declined transactions:

Each time you tried to complete your order, our card processor asked for authorization, and then attempted to verify the address. When the address didn't match, the transaction was declined due to address mismatch. Since the transaction was declined, no payment was captured, and the pending authorizations will disappear from your account soon.

ataxian · Jan 2, 2016

THC SCIENTIFIC said:
Glad Sam was able to get you up and running.

On a side note on a desk far far away is sitting our Plans of opening up our new location, within the next three weeks we will be getting our answer if they are willing to accept us as a neighbor.

Walk in clients will be again welcomed. Hopefully.

I'm I incorrect?

Shatter which I adore seem to only work in a PERSIE?

What am I doing wrong?

The voltage seems low on most devices?

Units get hot however they don't process SHATTER?

SamuraiSam · Jan 2, 2016

@ataxian You can use your shatter in any one of our vaporizers, from the $20 Vaporizer on up. You'll want to load small amounts, grain of rice sized, into our KISS cartridges.

If you have a Hercules SR-74x I'd suggest a half gram load, .25 to saturate the coil, melt that in, then another .25 on top of that.

aohaeg · Jan 3, 2016

Dear friends is the w8 vaporizers
is better for the oil hash than the mighty or the mighty is better please advice
Thanks

lonelyhero · Jan 3, 2016

In my opinion nothing will ever beat the hercules by w9tech

http://www.w9tech.com/vaporizer-cartridges/hercules-sr-74/hercules-sr-74x-oil-vaporizer-cartridge/

thegoo · Jan 3, 2016

aohaeg said:
Dear friends is the w8 vaporizers
is better for the oil hash than the mighty or the mighty is better please advice
Thanks

W9tech vaporizers are the "cream of the crop" as far as Im concerned.
The mighty is really designed for flower, although you can use it with oil if you tinker with it.
Bottom line: if your looking for a device to consume oil, look no further than w9tech.com!!!!

Edit: I have had a Mighty since Oct 2014 and it is hands down my top daily driver for consuming flower. However, I have not and would not use Oil in it because I have a closet full of w9tech vapes lol.

StormyPinkness · Jan 4, 2016

The nibbler ac is nice. I love the new stubbier/wider mp with the glass screen there.

vjt324 · Jan 4, 2016

damn.. all this talk about the nibbler ac.. gave in and went to go grab one and theyre out of stock. any ideas when its going to be available again??!

kingtut106 · Jan 5, 2016

Any promo codes available? I'm thinking of upgrading from kiss carts to a SR-74x

SamuraiSam · Jan 5, 2016

@vjt324 Soon... @THC SCIENTIFIC will have an accurate estimate once we hear back from the glassblowers.

kingtut106 said:
Any promo codes available? I'm thinking of upgrading from kiss carts to a SR-74x

We have more than a few items like the Persei itself on sale right now many things marked down 40%, and as for anything else our coupon code W9TECH will save ya 10% on almost any items besides batteries.

TelFiRE · Jan 6, 2016

So, it seems the cart page is non-functional on mobile (even when requesting desktop version). The second item you add goes to the right side, off the screen, but there is no sideways scrolling allowed.

THC SCIENTIFIC · Jan 6, 2016

TelFiRE said:
So, it seems the cart page is non-functional on mobile (even when requesting desktop version). The second item you add goes to the right side, off the screen, but there is no sideways scrolling allowed.

Currently working on fixing all of the issues we have with our site

Roth · Jan 6, 2016

Any updated estimates for when we might see the new 8? Preorders soon?

StormyPinkness · Jan 6, 2016

I want to know too, I'm excited for it. So far tc mode on the 2 boxes I've tried with the kiss ac dual coil have left me disappointed.

Wait, aren't there 2 versions of the new 8? Will they have different names?

Soflo · Jan 6, 2016

Yup, they'll be called the 8, and the8

Discontinued The Persei Vaporizer for herbs and concentrates.

Vapor Enthusiast

SOLO Vaporized Cannabis is my Best Medicine

Well-Known Member

Vapor Enthusiast

Extraction Technician

To Boldly Go Where No One Has Gone Before

Extraction Technician

Well-Known Member

To Boldly Go Where No One Has Gone Before

Well-Known Member

Extraction Technician

PALE BLUE DOT

Extraction Technician

Member

the lost soul

Well-Known Member

Rhymenocerous ʕ•ᴥ•ʔ

Well-Known Member

Well-Known Member

Extraction Technician

Well-Known Member

To Boldly Go Where No One Has Gone Before

Pining for the Mountains

Rhymenocerous ʕ•ᴥ•ʔ

Only birdshit and fools