Discontinued VapeXhale Cloud EVO

stonemonkey55

Chief Vapor Officer
Manufacturer
You have quartz, they did have a disclaimer on the page when we bought (we both got HydraTrees relatively close together right?) during the end of the anniversary sale in October (@twosilvertrees this bundle is the only one that ever came with them I believe)

@gaseous_clay yes I also am still dying to try a HydraCirc (too bad that FC-MP didn't work out, maybe they'll fix it eventually...) I believe $160 isn't as cheap as they were before "from the vault" recently at $150, even with the 10% off, and now shipping is more money? Or still 15? Only kits went from 25 to 35?

Anyway yeah after trying the showerhead circ in the Devastator main body via the FC-MOD I can definitely see that ciric percs are different than trees but not necessarily better... I'd say a tree is overall more versatile with different water and draw levels, but the Circ is somehow a bit tastier and smoother in a sense? So different, but both good! I also do really like my GB-187 matrix and inline to honeycomb can with the Evo, they each have a bit more diffusion. HydraTree on top of circ perc is a fun combo too (but I still want to try a HydraCirc! lol)

The boro nails have the slit upward from left to right and the quartz slit is downward from left to right.

@Shit Snacks - I think you hit the nail on the head. There really isn't one that is better, it is all preference. For me, it doesn't matter what I'm using, after a few days, I get bored of it. It can even be a Mothership or Sovereignty piece but I will get bored of it and want to try something different. Sometimes the something different is just a standard waterpipe with a two slit diffusor. I think what I am trying to say here is that glass is like ice cream, 31 flavors beats 1 flavor, no matter how good that one flavor is :)
 
The boro nails have the slit upward from left to right and the quartz slit is downward from left to right.

@Shit Snacks - I think you hit the nail on the head. There really isn't one that is better, it is all preference. For me, it doesn't matter what I'm using, after a few days, I get bored of it. It can even be a Mothership or Sovereignty piece but I will get bored of it and want to try something different. Sometimes the something different is just a standard waterpipe with a two slit diffusor. I think what I am trying to say here is that glass is like ice cream, 31 flavors beats 1 flavor, no matter how good that one flavor is :)
Well you definitely pushed me to get a quartz nail now. Quick question- any chance more chandelier hydratubes will be released? I've seen a couple of them on the vapexhale Instagram page and I figured you planned to release them at some point
 
vapingandvapingandvaping,

stonemonkey55

Chief Vapor Officer
Manufacturer
Well you definitely pushed me to get a quartz nail now. Quick question- any chance more chandelier hydratubes will be released? I've seen a couple of them on the vapexhale Instagram page and I figured you planned to release them at some point

They are being made as we speak :)

The Chandelier is basically a handmade honeycomb, those Symbiartic guys are insane!!!
 

gaseous_clay

Well-Known Member
They are being made as we speak :)

The Chandelier is basically a handmade honeycomb, those Symbiartic guys are insane!!!

It does look beautiful. Can't wait! Was this the prototype, or were there a few that were part of the "EXTREMELY Limited Edition?"

@Shit Snacks I'm tempted by the 'Circ, but having the 'Tree already and not seeing a great difference between them (and also having a Swagger Double) I haven't pulled the trigger. Even with using a 10% off code.
 

Alan Partridge

Smell my cheese
Well it had to happen lol
The glass nail I've been using has cracked. I decide to treat myself and buy the quartz pack and @VapeFiend.com have sold out :(
Just my luck, doh :bang:

This is actually the second time this nail has cracked, but torching it got rid of it last time.
This time torching has shrunk the crack, but it's still there and deformed slightly.

[edit] @VapeFiend.com don't expect any stock till after the new year.. They also told me that when the next shipment comes in the current reduced pricing will remain, but hydratubes will be dropping to £159

If you want to twos up on the Quartz nails and split the cost let me know....
 
Alan Partridge,
  • Like
Reactions: Pyr0

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
It does look beautiful. Can't wait! Was this the prototype, or were there a few that were part of the "EXTREMELY Limited Edition?"

@Shit Snacks I'm tempted by the 'Circ, but having the 'Tree already and not seeing a great difference between them (and also having a Swagger Double) I haven't pulled the trigger. Even with using a 10% off code.

I could never justify it, couldn't before when it was even less, so not now regardless... How's the double treating you? That's got a tree and a circ no? You're already fully covered! lol
 

mikeben

Well-Known Member
So like I stated earlier, I'm way too excited for my Evo to arrive. I'm at work right now and that's all I'm thinking about.

Before I actually use my Evo, do I need to do a burn off? I also read somewhere that it's probably a good idea to try heat soaking the air pathway by warming it up to max temp for a bit then turning it down. I'm not sure what heat soaking does, can someone clarify? When I heat soak, do I need to put my hydratube on top?

Any other advice from experienced users would be really appreciated. Thanks!
I never did a burn off as the air path is already so open but you need 5 min to warm up anyway. I feel It works well if it is on a while or not, but it changes temps faster I notice. So heat soak is not essential but it helps a little maybe. Heat soak just gets it hot and going as far as I can tell. Don't put a tube on until you are ready to vape from it.
 
mikeben,

gaseous_clay

Well-Known Member
I could never justify it, couldn't before when it was even less, so not now regardless... How's the double treating you? That's got a tree and a circ no? You're already fully covered! lol

Double is one of my favorites! I've told the story before how I ordered the ShowerCap & realized after a few weeks I got the wrong one, but couldn't bear to part with it. I need to clean a few pieces & take a glass family photo...

As for it being "less," it's actually cheaper now. You should have a 'Foot for it, and that wasn't included before. It comes out $10-$15 less now than I believe I paid for the 'Tree.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Double is one of my favorites! I've told the story before how I ordered the ShowerCap & realized after a few weeks I got the wrong one, but couldn't bear to part with it. I need to clean a few pieces & take a glass family photo...

As for it being "less," it's actually cheaper now. You should have a 'Foot for it, and that wasn't included before. It comes out $10-$15 less now than I believe I paid for the 'Tree.

Ah I forgot the foot only came with it before when you buy the kit! So very true
 

HellsWindStaff

Dharma Initiate
Question: after dabbing out my EVO a lot the past few days, I noticed some reclaim coming out the end of the bamboo on the bottom. Not a lot, and it's on the very bottom...im assuming that a q Tip dipped in ISO, if I ran it along the inside of the bottom of the bamboo, basically only on the inside of the nub sticking out the bottom, I trust that will be ok? That's the only spot with gunk, and I'll just keep my EVO right side up so no worry about ISO dripping down. Hope this made sense, bit medicated from the EVO :)
 

mixchu69

Well-Known Member
I am looking at the hydracirc bundle and it comes with a vxn. I'm assuming that it is glass, but doesn't the hydracirc only work with the quartz nail?
 

Slow Draw McGraw

Well-Known Member
Company Rep
Question: after dabbing out my EVO a lot the past few days, I noticed some reclaim coming out the end of the bamboo on the bottom. Not a lot, and it's on the very bottom...im assuming that a q Tip dipped in ISO, if I ran it along the inside of the bottom of the bamboo, basically only on the inside of the nub sticking out the bottom, I trust that will be ok? That's the only spot with gunk, and I'll just keep my EVO right side up so no worry about ISO dripping down. Hope this made sense, bit medicated from the EVO :)
If you finish your concentrate in one hit and don't allow blowback, there will be less reclaim at the bottom end of the Bamboo. Yes, a q-tip should work fine.
 

HellsWindStaff

Dharma Initiate
If you finish your concentrate in one hit and don't allow blowback, there will be less reclaim at the bottom end of the Bamboo. Yes, a q-tip should work fine.

Thanks for the tip..never really thought about that before. I've been using the whip kit, and quite a few times I've taken a hit...not cleared, exhaled, and Rehit..makes sense that when I stop hitting the difference in pressure would "push" the concentrate down, but never thought about it. Learn something new everyday! Thanks again!
 

stonemonkey55

Chief Vapor Officer
Manufacturer
If you finish your concentrate in one hit and don't allow blowback, there will be less reclaim at the bottom end of the Bamboo. Yes, a q-tip should work fine.
Thanks for the tip..never really thought about that before. I've been using the whip kit, and quite a few times I've taken a hit...not cleared, exhaled, and Rehit..makes sense that when I stop hitting the difference in pressure would "push" the concentrate down, but never thought about it. Learn something new everyday! Thanks again!

I like to load small bowls that I can easily finish in one breath. Maybe not quite as fun as a massive rip but more economical and less clean up. Now when it's Friday, I go for the jumbo load!
 

harmless healing

Well-Known Member
I'm beginning to really hate vapefiends contract with VXH for UK distribution. I want to buy the gordo deal. But because of some bullshit contract I can't. Correct me if I'm wrong but vapefiend have never stocked this peice, nor will they in my opinion. I understand exclusivity rights. But on a product that was never offered by said company is nonsense

I would also like to add they were more than happy to do business with me on the scratch dented tubes, I just a didn't complete the PayPal invoice due to a few bad reports here

Chest la vie

Edit:this also fucks me over for future HT releases. I have to hope VF get them in. Which they rarely do. The last they had aside from house glass was swagger, and it's gone now.

Can I suggest a mutual change of said contract to only include items VF intend to stock?

Sorry for the rant. Very unlike me, not being able to have something due to these circumstances is new to me and very frustrating. Exhales ploom and chills.

:smug:
 
Last edited:
harmless healing,
  • Like
Reactions: Mangos

c76man

In search of the best terps and smoothest vapor
Anyone seen any hydra foot 2.0 bomb editions or otherwise for sale anywhere? I haven't seen any for a long time, and I feel like that's a hole in my glass collection.
 

shaolinmilk

Well-Known Member
I can't get the Evo to work correctly. I put very little herb into the ELB and have left the Evo on for over 30 minutes. When placing the ELB into the chamber, is it a tight fit? Also, when placing the hydratube over the base, is it also still/tight? When I try to pull from it, there is so much resistance. I get no vapour production and the herb is still green. The unit definitely gets hot and sometimes I noticed it has trouble staying green (it'll pop red for a few seconds and go right back to green).

EDIT:

Ignore this post also... lmao I forgot to take off the red thing that blocks the airway from the bottom of the base... :doh:
 
Last edited:

HellsWindStaff

Dharma Initiate
Ignore this post also... lmao I forgot to take off the red thing that blocks the airway from the bottom of the base... :doh:

This honestly had me dying, thank you :) i cracked up reading this so much my roommate has to ask what was up lol, I hope you have more success now!

My new piece is SO fantastic with the EVO. Great with flowers and concentrates, one happy camper :D

I am still cracking up imagining your frustration/realization
 
Last edited:

gaseous_clay

Well-Known Member
This honestly had me dying, thank you :) i cracked up reading this so much my roommate has to ask what was up lol, I hope you have more success now!

My new piece is SO fantastic with the EVO. Great with flowers and concentrates, one happy camper :D

I am still cracking up imagining your frustration/realization

Me too. If I didn't know better, I would have sworn he was high. But he wasn't. Because he didn't take the cap off the bottom. HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA!!!!!
 

shaolinmilk

Well-Known Member
I've been playing with my new Evo and I noticed if I set the temperature to about 2 O'clock, it'll be green, however once I turn the knob a little to the left (Between 1 and 2), it'll stay red and won't turn green. If I turn it to the left or right after this, it'll turn green again. In addition to this, sometimes I'll have it set to 2 O'clock, it'll hit the temperature and stay green. After a brief moment or so, it'll turn red for a little bit before turning green again. Does this mean it's not able to hold the temperature correctly? The ABV I get isn't completely even. There will be light spots, dark spots and really charred looking spots. Is it possible that I have a defective Evo?
 
I've been playing with my new Evo and I noticed if I set the temperature to about 2 O'clock, it'll be green, however once I turn the knob a little to the left (Between 1 and 2), it'll stay red and won't turn green. If I turn it to the left or right after this, it'll turn green again. In addition to this, sometimes I'll have it set to 2 O'clock, it'll hit the temperature and stay green. After a brief moment or so, it'll turn red for a little bit before turning green again. Does this mean it's not able to hold the temperature correctly? The ABV I get isn't completely even. There will be light spots, dark spots and really charred looking spots. Is it possible that I have a defective Evo?
Set your unit to the halfway point on the dial(12 or 11) and toggle the switch about 5 or 6 times. This should reset your unit to the factory preset. Try this
 
Top Bottom