• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

herbivore21

Well-Known Member
https://epicvape.com/product/e-nano-premium-walnut-kit/

This one. I'm pretty sure its V2. I only ordered it about two months ago. You are awesome❤️❤️
hmmm ok let's check with Andy on this one.

@ACE OF VAPE long time no speak brother! We have an enano that needs some TLC here from some melted plastic on the SS heater sleeve/cover and screen at the end of said tube. Am I right to say that the unit must be disassembled from the bottom so electronics can be removed and the retaining screw that connects the SS part to the wood can be separated (allowing for solvent soaking/scrubbing or even limited use of heat to clean the SS part without damaging wood) to repair this issue?

Has anything changed between the OG enano and the 2.0 that would make this at all different to take apart than how it was when I replaced the dimmer/cable on my nano? Are there more screws that hold the power cable socket in place for example?

Cheers :)

@MaggieH hopefully Andy can notice this quickly and let us know of anything extra to be mindful of in fixing your nano given that it is a v2 ;)
 

Madcap79

Jack of all trades, master of none.
I was able to pop out the top screen without taking anything apart. You do need to be careful though because the heater is right behind the screen. I just pushed down on one side and it popped up. I just took another screen and formed it into a cup and popped it back in. Andy might have a better solution though. I have an old V1. Good luck.
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
I'm hitting the E-nano exclusively tonight for the first time in a week or so. I've been experimenting with the Lotus. I absolutely love it too, but I find it hard to resist the temptation to vape your herb until it's a dark brown (oh, I can apply heat for just a second longer!), and I also found myself hitting it too often because it's so damned fun to use (I know, some gripe, right?).

I haven't used my Lotus in a while. I used it exclusively for about 6-8 months and still depend on it when camping. The torch thing became a pain in the ass in that I could never find a consistent torch. My best torch ended up being a old creme brulee torch that I would set at its lowest setting. It is easy to refill and once you get used to the shut off valve, it was the best torch. Even when I got comfortable with the torch, I would still char my ABV every now and then. This would stink up the bowl and require cleaning.

The Lotus cap with the wpa on glass was the best way for me. As @ataxian has said before, the metal wpa is the BEST designed gong there is. Hmmm, maybe I'll give her a rip tonight :brow:

The nano reigns supreme at home. You can zero in on the level of heat and never worry about charring. It's like a fool-proof vaping experience.

I use a LOTUS (joint like) however I finish my day with a NANO!
Just liked watered down coffee do it with flavor or go home!

I second all that!

I prefer a french roast myself
 

ACE OF VAPE

Vape outside the box
Manufacturer
Yes please help me!! There is a washer type thing slightly over the heating element that won't budge, preventing me from getting it out. I wish I could post a pic, but I'm mobile :/
The plastic is most likely just on the screen and outher tube. I would first just pop off the screen, pinch it with tweezers and pull it out. Then clean the outer tube with some fine sandpaper. If there is plastic inside the tube you will need to remove the heating element. (email or call me and I can talk you through it). Email customer service and I can send you out another screen that you can install without removing the heater.(it's not easy but it can be done. I'm going to do a video soon on how to do it.
 

MaggieH

Member
The plastic is most likely just on the screen and outher tube. I would first just pop off the screen, pinch it with tweezers and pull it out. Then clean the outer tube with some fine sandpaper. If there is plastic inside the tube you will need to remove the heating element. (email or call me and I can talk you through it). Email customer service and I can send you out another screen that you can install without removing the heater.(it's not easy but it can be done. I'm going to do a video soon on how to do it.

Perfect! Thanks so much. I'm about to remove screen. Fingers crossed it's just on that! Thank you for the stellar customer service!
 
Last edited by a moderator:

MaggieH

Member
The plastic is most likely just on the screen and outher tube. I would first just pop off the screen, pinch it with tweezers and pull it out. Then clean the outer tube with some fine sandpaper. If there is plastic inside the tube you will need to remove the heating element. (email or call me and I can talk you through it). Email customer service and I can send you out another screen that you can install without removing the heater.(it's not easy but it can be done. I'm going to do a video soon on how to do it.
Okay I was able to pop the screen of and no plastic inside! Emailed customer service about the replacement piece. Thanks again!
 

AegonT

Well-Known Member
Because you can. You never know when you might need a back up. I also use my extra Nano as an aromatherapy device with essential oils. I've had a friend over and she used one and I used the other.

It came across as though shaolinmilk was thinking about buying two because two is a similar price to one cloud evo. Which is a really silly reason to buy two. Obviously there are scenarios where two would be handy...
 
Last edited:
AegonT,
  • Like
Reactions: nondarb

Gandalf

Well-Known Member
Nano is out for delivery! I just wanted to express my appreciation to Andy and Carisa for the amazing customer service I've received since ordering. I ordered early Tuesday morning and it is arriving TODAY. Super fast processing and shipping.

On top of that, I forgot to add extra screens to my order, so I emailed customer service requesting they be added to my original shipment. Because it shipped out SO quickly, my message arrived too late, but I got a very fast reply from Carisa offering me a free shipping code to use to get the screens and any other accessories I wanted to add on.

Cannot wait to test drive this thing, so excited.
 

Frandemarco

Active Member
Nano is out for delivery! I just wanted to express my appreciation to Andy and Carisa for the amazing customer service I've received since ordering. I ordered early Tuesday morning and it is arriving TODAY. Super fast processing and shipping.

On top of that, I forgot to add extra screens to my order, so I emailed customer service requesting they be added to my original shipment. Because it shipped out SO quickly, my message arrived too late, but I got a very fast reply from Carisa offering me a free shipping code to use to get the screens and any other accessories I wanted to add on.

Cannot wait to test drive this thing, so excited.

Me too just ordered mines at 2pm itll be great if mines come tommorrow
 

Eyedunno

Well-Known Member
The Lotus cap with the wpa on glass was the best way for me. As @ataxian has said before, the metal wpa is the BEST designed gong there is. Hmmm, maybe I'll give her a rip tonight :brow:
I definitely see why you would say that, but I didn't much enjoy the experience of the Lotus through water. I can totally think of a cheap way to turn the Lotus WPA into a great nano WPA (just a steel bushing and an appropriately-sized o-ring).
 
Eyedunno,
  • Like
Reactions: ataxian

dzoinp

Well-Known Member
Accessory Maker
Hello guys,
Second week with my enano, bought after one of my craftys have asked to return to the factory ... again !!
In fact only a few weeks I started to look for a home unit ... My craftys are doing little more than 100hrs and my VOLCANO is for sale on ebay for lack of use. (I do not vape in group) I use 2 craftys rotating and my wife loves the ascent...
Well I love the fact that the Enano be so efficient! With enano i use 1/3 of material what use in crafty. WOW!
I use a 220/110 converter and controller in the number 5! pack repack pack again!;) With the crafty 175C and boost at 185.

Now a question: Has anyone tried to adapt a CU crafty / enano the mighty? It should be great;)

cheers!
 

ataxian

PALE BLUE DOT
I definitely see why you would say that, but I didn't much enjoy the experience of the Lotus through water. I can totally think of a cheap way to turn the Lotus WPA into a great nano WPA (just a steel bushing and an appropriately-sized o-ring).
I love the NANO so please read my argument?

I leave my NANO on 24/7 and take rips before naps and before final sleep.

The LOTUS has the best water adapter in my worthless opinion.

I grab my largest water pipe for the LOTUS.
It will fill it!

The SOLO is with me all day long!
The VAP2 taste the best.

I have many other vaporizers that I won't mention because they weren't for me.

The NANO is a compromise taste and effect are pretty solid.

The EVO I'll get next year sometime.

The NANO is doing the job most of the time and when I get a EVO I plan to keep using the NANO.
The LOTUS is cheap and powerful.

Comparing a NANO to a LOTUS doesn't make any sense?

I have a Q as well and with a @DDave kit it works well.

Today I get another vaporizer and will not comment unless it meets my needs.

The NANO and SOLO work for me and my needs the most.

I guess I might be out of touch?

The HERB IRON is my favorite however it smells too horrible to use in the house.
The NANO smells sweet so I use it in the bedroom!

420 time to medicate!
 
Last edited:

Poostuff

Please delete
Has anyone tried to adapt a CU crafty / enano the mighty? It should be great;)
You're crazy man you want to build Frankenstein E-Nano?!! :mental:
Seriously though you can hook it up to almost anything even hydratubes so I wouldn't be surprised if someone has already tried it.
I don't why you'd want to imo those "scientifically" designed plastic ridges don't do a great job at cooling vapor.
Love to see a pic if you do.
 

olivianewtonjohn

Well-Known Member
Broke my 18mm gong a few days ago and had to order a new one. The new one is so much better. I think my old one was from a bad batch or something? I barely had any adjustability this new one has some extra length and is easier to use with more adjustability.

I also dont need to use a Y adapter with my 16" bong, the water levels would get alittle to high before. With the extra length this is fixed as well.

This things great for when you want to bring out the big guns:
http://www.thickassglass.com/produc...b-water-pipe-7mm-thick-w-spinning-splashguard
 
Last edited:

Eyedunno

Well-Known Member
Has anyone tried to adapt a CU crafty / enano the mighty? It should be great;)
I would say do yourself a favor and buy the necessary parts for the Plenty's CU instead (less than $30 IIRC--you only need a mouthpiece, a cooling coil, and some silicone tubing, then put it together and stick it on a GonG or some other *onG). It works brilliantly if you want a very smooth yet flavorful experience from your nano. I find I prefer the regular stems, but the experience of a Plenty cooling coil on the nano is better for me than the actual Plenty. :)
 
Eyedunno,
  • Like
Reactions: ataxian

ACE OF VAPE

Vape outside the box
Manufacturer
Broke my 18mm gong a few days ago and had to order a new one. The new one is so much better. I think my old one was from a bad batch or something? I barely had any adjustability this new one has some extra length and is easier to use with more adjustability.

The New GOngs are indead longer for more adjustability and cooler to touch.

Modnote: removed reply from quote tags
 
Last edited by a moderator:

herbivore21

Well-Known Member
Okay I was able to pop the screen of and no plastic inside! Emailed customer service about the replacement piece. Thanks again!
Fantastic :) Knew Andy wouldn't steer you wrong.

Even if my Nano has been out of commission long term now, the nano remains one of the very best vapes one can get without spending big bucks (and it'll go pound for pound with some of the pricier ones still!) and Andy has always been wonderful with service in my experience :)

Also lovely to see this thread still buzzing with happy nano people! I have missed this thread's vibe! :)
 

Jack Burton

Member
I meant to post a few days ago when I received it, but my nano finally arrived, which was awesome - even if USPS routed it over to the east coast for no discernible reason. I gotta say, the wait was completely worth it. Love the vape, and can't wait for my water piece to arrive. Until then, the dry stems have been great. What amazing flavor! Coming from the Firefly, This was the first noticeable difference between it and the nano. The other major difference is that while the Firefly does a pretty solid job at conserving herb, the nano takes that to another level.

Very pleased, and I've already convinced a friend to order one for himself, and he's now eagerly awaiting its arrival.
 
Top Bottom