VaporBros vs. DBV

Status
Not open for further replies.
W

WesWeed

Well-Known Member
Hi all,

I really admire FC, both as an intelligent community and the best internet forum I've ever seen. Especially since I came over here from GrassCity, it's a breath of fresh air (puns?) to see such an articulate bunch.

About a year ago, I purchased my first vaporizer. It was a cheap box vape off ebay, but it turned me on to vaporizing. I've been looking around for a better vape for this coming semester, and I've pretty much narrowed it down to two possibilities (although I'm open to other suggestions): a vaporbros or a DBV.

I'd LOVE a comparison by someone who has both, since I searched all over and couldn't find anything.

In particular, I'd like to know how each one performs in terms of efficiency (a big plus), and group v. individual usage. I'll be using this with 1-6 people, and I want something that can function as an efficient solo vape but also is good enough for group use.

I think I like DBV more, but I'm concerned about the narrower wand, the fact that the tubing seems to fit into, rather than onto, the want(is it a tight seal?), and the open, horizontal heating element. Can anyone tell me that these things won't be problems?

Things I don't care about: stealth, warm-up time, vapor density, customizability.

Opinions? Suggestions? Thanks,

WesWeed
 
WesWeed,
Beezleb

Beezleb

Well-Known Member
I have a DBV and never had an issue with the tubing and add the lack of anyone reporting such an issue I would say your tubing concern is a non issue. I have no issue with the heater cover angle and the DBV works perfectly for me but using 3 people or more is a hassle with these vapes for the most part.

For using 6 people I would recommend using at least two separate whips, keep a mouse pad infront of the vape incase someone inexperienced pulls the wand out and if is so its likely to land harmlessly on the mousepad.

Happy Vaping and hope that helped.
 
Beezleb,
O

owin

Well-Known Member
Yeah the only time you'll likely have trouble with the tubing slipping out is when you have fresh tubing. Easy way to fix it is wet the tube a little and it should stick(especially after getting heated up from regular use).

Also as Beezleb said it can be a bit of a pain with that many people. the constant rotating of the DBV can be a pain in the ass and can be dangerous if you aren't careful. I've seen plenty of times someone rotating the DBV to hit it and knocking a beer over with the tubing or the cord coming out the back. Just be aware of what you are doing(easier said than done when high as balls!) and you should be fine. Just last night was using the DBV with like 8 people. And yeah as Beezleb suggests loading 2 wands makes it easier and faster.

Good luck!
 
owin,
max

max

Out to lunch
I've used the lightweight, poor angled box vapes, as well as a DBV (I own the SSV), and the DBV is hands down a better choice IMO.

Can anyone tell me that these things won't be problems?
Click to expand...
These things won't be problems. ;) The narrow wand is a non issue. If you have any trouble fitting the tubing into the wand, just dip it in very hot (even boiling is OK) water for about 5-10 seconds and it'll go in just fine. If the wand opening should be too big, and the tubing won't stay in, just contact 7th Floor and get a free replacement. The heating element being exposed is not a concern, and it's vertical. The connection for the wand is horizontal, and that's a good thing. You just have to be careful not to jerk on the whip while it's connected. And the carry/storage bag that comes with the DBV makes the decision a no brainer, as far as I'm concerned. $140 delivered from vapeworld or dieselvapors with FC coupons.
 
max,
C

CannabisSativa

Well-Known Member
I dont think this topic was discussed enough in the last thread so I made a new one. I am currently looking into both of these options but wanted to know unbiased opinions about both if someone had hit both Vapes....

I like the look of the VB better, but DBV has a reputation for better hits. I know they are larger usually, but does the DBV get you any higher than a Vapor Brothers? Is one anymore efficient than the other?

If anyone could help me out in these factors, it would be much appreciated!




mod note: Sorry, duplicate threads are frowned upon on all forums. It makes info harder to find/easy to miss.
 
CannabisSativa,
W

WesWeed

Well-Known Member
I am certain that someone out there has both and can give me (and everyone else) a side-by-side comparison. Equal in all ways? Horizontal heating element vs. angled and screened? Warm-up time? Vapor to air ratio?

Anything?
 
WesWeed,
max

max

Out to lunch
I am certain that someone out there has both
Click to expand...
Don't recall ever hearing from anyone with both. If someone owns a VB and then buys a DBV, it's likely because they don't like the heater angle, the lightweight box, or the difficulty of changing the screen. Those are the reasons we mostly hear for going from a box to the DBV or SSV. You really don't hear that someone bought a DBV because their VB or other name brand box doesn't hit well. As for someone moving from the DBV to a wood box vape, well personally I've never heard that. But I suppose someone could prefer the VB heater angle for a more secure connection, or decide they like the wood look.

There's nothing special about the way the VB hits vs. other good box vapes. Most of the reason you hear VB touted so much is because of hype left over from the early days, when it was mostly VB or Volcano for a good convection vape. And since there are other box vapes with equal or better warranties, and both VB type heater angles and horizontal like the DBV, I'd suggest making your choice on the basis of wood vs. aluminum housing, and ergonomics.
 
max,
M

mayan

Well-Known Member
I've owned both...what Max said. Spot on. Traded up to a DBV haven't looked back for a second.
 
mayan,
J

jackson495

Well-Known Member
Hi folks - new to the boards and to vaping...in fact, I am in the market for my first vape and can't wait. I know this topic has been discussed a lot on the boards, but thought I'd revive it and get a little more specific about my needs.

Was all set to spring for a Hot Box until I did a little more research (on these boards, specifically) and found that people have much much better things to say about the VB and DBV. I've been leaning towards the VB for these reasons:
1) a little cheaper (I know I can get a good deal on VB at a local smoke shop, about $150)
2) easier to find in stores near me than DBV - both are hard to find in stock online
3) I prefer the look of the VB

But I'm torn - most posts I read seem to lean towards the DBV. Is it worth the extra few bucks? And more importantly, between the two, is one better for a first time vaper? What are the big differences between the two? Is DBV really superior? I'm guessing either one is a good choice but would love my first purchase to be a great one.

Main concerns for me are value, ease of use, and quality of materials. Wouldn't mind knowing which one hits harder as well.

Thanks! Looking forward to getting into vaping.
 
jackson495,
Spacenstein

Spacenstein

Well-Known Member
jackson495 said:
Hi folks - new to the boards and to vaping...in fact, I am in the market for my first vape and can't wait. I know this topic has been discussed a lot on the boards, but thought I'd revive it and get a little more specific about my needs.

Was all set to spring for a Hot Box until I did a little more research (on these boards, specifically) and found that people have much much better things to say about the VB and DBV. I've been leaning towards the VB for these reasons:
1) a little cheaper (I know I can get a good deal on VB at a local smoke shop, about $150)
2) easier to find in stores near me than DBV - both are hard to find in stock online
3) I prefer the look of the VB

But I'm torn - most posts I read seem to lean towards the DBV. Is it worth the extra few bucks? And more importantly, between the two, is one better for a first time vaper? What are the big differences between the two? Is DBV really superior? I'm guessing either one is a good choice but would love my first purchase to be a great one.

Main concerns for me are value, ease of use, and quality of materials. Wouldn't mind knowing which one hits harder as well.

Thanks! Looking forward to getting into vaping.
Click to expand...

The whip and wand setup was never easy for me to deal with but they're similar with both units. I think the heating element on the DBV is a little more reliable and more versatile than the VBs. I do like the look and style of the VB more but I'd still choose the DBV.. It's very durable too..

Let me tell you though.. research more about vapes and find your perfect first vape.. don't buy anything too fast or you'll be disappointed.
 
Spacenstein,
Brenard420

Brenard420

Creepin in the shadows!
These were the two that I was torn over. My local headshop had a VB for $180 (taxes in). After all my research I went with DBV though. paid $20 online more for a superior vaporizer.
the reasons:
- both have a three year warranty
- VB has a downward angle heater cover, DBV has a right angle heater cover
- VB has 10min warmup time, DBV has 10second warm up time
- DBV is much more aesthetically appealing to me
- DBV seems to be built a little sturdier
- VB is a two piece wand (one more piece that could break)
 
Brenard420,
OhTheAgony

OhTheAgony

here for the chicks
You could also get a blemished DBV for 130,- + shipping @ 7thfloorsales on e-bay. The 110V versions go quick though, so if you want one you better jump on it as soon as one is available again.
 
OhTheAgony,
max

max

Out to lunch
ease of use, and quality of materials
Click to expand...
IMO the DBV wins out, hands down. Have you looked at the connection angle for the whip on the VB?
 
max,
Nycdeisel

Nycdeisel

Well-Known Member
yep, DBV for sure!
and you should definitely do this:

OhTheAgony said:
You could also get a blemished DBV for 130,- + shipping @ 7thfloorsales on e-bay. The 110V versions go quick though, so if you want one you better jump on it as soon as one is available again.
Click to expand...

with those prices you could get a blemished SSV, which as an even beater wand angle. and I think its easier without the GonG connection because with the DBV I think the 'handsfree' can give a false sense of security to some.
 
Nycdeisel,
Cloud954

Cloud954

Member
i bought a brand new dbv and use it attached to my bong daily... its the best investment ive ever invested in
 
Cloud954,
MG23

MG23

Relaxin'
Nycdeisel said:
and I think its easier without the GonG connection because with the DBV I think the 'handsfree' can give a false sense of security to some.
Click to expand...

Please explain what you mean.
 
MG23,
OhTheAgony

OhTheAgony

here for the chicks
Nycdeisel said:
yep, DBV for sure!
and you should definitely do this:

OhTheAgony said:
You could also get a blemished DBV for 130,- + shipping @ 7thfloorsales on e-bay. The 110V versions go quick though, so if you want one you better jump on it as soon as one is available again.
Click to expand...

with those prices you could get a blemished SSV, which as an even beater wand angle. and I think its easier without the GonG connection because with the DBV I think the 'handsfree' can give a false sense of security to some.
Click to expand...


Agree ^^

I started out with a BC vap and then a Kia box in mind, but I was actually going for a DBV after a month's worth of research and upping my budget 3 or 4 times. Until I discovered the blemished models and their prices. So glad I got the SSV I was lusting after since I first discovered her but thought was to expensive. Hands free sounded nice at first, but seeing how much I move my wand now so I can take way longer thus bigger hits without burning my material it wouldn't have been practical at all. And I'm not even mentioning the pleasant angle and looks. But I can't look in to your pockets, just wanted to even the odds for the DBV a little.
 
OhTheAgony,
J

jackson495

Well-Known Member
Hey guys - thanks for weighing in. Posted this on another board and it's pretty unanimous for the DBV. I found one, new in box, on sale on eBay from a reputable seller for $160 including shipping and grinder. Seems like a pretty good deal, though I'll keep an eye out for blemished ones if they pop up.

Thanks for the insight - and of course, more opinions still welcome.
 
jackson495,
AGBeer

AGBeer

Lost in Thought
Have you considered any of the cheap chinese knock offs?
They are cheap and made with parts that you know nothing about! Not to mention, its a crapshoot on whether it will work effectively or not too!

Wait... You said you already did some research. :p

I have an SSV and I absolutely love it.
 
AGBeer,
max

max

Out to lunch
MattyGTwenty3 said:
Nycdeisel said:
and I think its easier without the GonG connection because with the DBV I think the 'handsfree' can give a false sense of security to some.
Click to expand...

Please explain what you mean.
Click to expand...
Pretty sure the meaning is that the ground glass connection, because it's horizontal, can be broken by an inadvertent tug of the whip, and you can end up with the end of the wand bouncing on whatever surface the DBV is sitting on. Putting this model on something like a mouse pad, to provide a soft landing spot for the wand, is a good safety measure.
 
max,
Cloud954

Cloud954

Member
hands free or not you cant take proper rips off the thing without eventually pulling the wand out to clear it so if you cant stay still for 10 seconds to take a rip, then dont take advantage of this handsfree option haha
 
Cloud954,
N

Nosferatu

Well-Known Member
Does no one realize turning the DBV wand in either direction locks it in, pretty damn tough too it can actually be hard getting out if you turn too far. So the chance of the wand breaking is slim if you do this, but of course still possible.
 
Nosferatu,
Nycdeisel

Nycdeisel

Well-Known Member
that was something else I was going to mention. it can fall out accidentally, like Max explained, however it can also become stuck, creating further problems.

Im very, very, very careful with all of my vaporizer apparatuses, but even I have had both happen while using mine, and luckily, did not break any of its parts.
 
Nycdeisel,
Status
Not open for further replies.
Top Bottom