Divine Tribe atty's

Steven

Steven

Well-Known Member
DJ Colonel Corn said:
Just wanted to say HEY COOL to the poster (see comment here) who shared this lil mini bubbler and o-ring here on the thread, works pretty well ! Here's an image:

HpewIpc.jpg


That's the v2.5 DT Donut on an IPV 4S, in temp mode, 20 Joules @ 320 F.
Of course, I prefer Matt's Bubbler Attachment he offers on the site, and generally use that.
He's got male/female and 14/18 mm sizes. Works great. I'll get a pic of it up here as soon as I clean up my bubbler, she's gotten a bit dirty with use.

All the best, everyone !
Click to expand...
Do you guys actually like these little bubbler attachments? I vape quite often and when I used these back then, it would clog very fast because the diffuser holes are so small and so close to the glass wall.
If you don't mind the size, I'd suggest nectar collectors or the pinnacle pro bubbler attachment. I posted pictures a while back in the earlier threads
http://fuckcombustion.com/threads/divine-tribe-attys.14455/page-20
 
skayleef

skayleef

Well-Known Member
Which temp control mod works best have you guys found with the DT 2.5? I am thinking about getting the most optimal TC mod for the DT, I know he sells the eleaf and mini invader, but I have read so many terrible things about the invader, and the eleaf is an eleaf. If either of these is just A+ perfect with the DT 2.5 and DT 3.0, I would like to know!
 
Hoosier

Hoosier

Well-Known Member
ive been using the eleaf since july. battery lasts forever and its a great combo, as long as you dont overload the dv2.5.
 
C

ChrisCT

Well-Known Member
skayleef said:
Which temp control mod works best have you guys found with the DT 2.5? I am thinking about getting the most optimal TC mod for the DT, I know he sells the eleaf and mini invader, but I have read so many terrible things about the invader, and the eleaf is an eleaf. If either of these is just A+ perfect with the DT 2.5 and DT 3.0, I would like to know!
Click to expand...
I have the eLeaf iStick 40wTC, and I find I would benefit from having a box mod which allowed me to set the max voltage/wattage in TC mode. I set mine to 310*F, but it initially fires with all 40W. It results in blackened material on the donut. I am going to check out the IPV4s next, hopefully I'll have better results with the ability to keep the power low.
 
zikzak

zikzak

Well-Known Member
Ipv d2 with dt 2.5 is doing awesome for myself at 19 joules 305F. I personally like the feel /weight of the mod. Seamless operation thus far. I do a fair amount of ejuice (betty) out of a uwell tank w the d2 as well and find it versatile for that world as well.
 
Steven

Steven

Well-Known Member
skayleef said:
Which temp control mod works best have you guys found with the DT 2.5? I am thinking about getting the most optimal TC mod for the DT, I know he sells the eleaf and mini invader, but I have read so many terrible things about the invader, and the eleaf is an eleaf. If either of these is just A+ perfect with the DT 2.5 and DT 3.0, I would like to know!
Click to expand...
What's your biggest concerns with the invader mini? I been using mines for months and I love it. The only issues i have with mines is that sometimes I must press the power button more than 5 times to turn it off. Also maybe once every few months it will turn off and the settings much be reentered. I haven't experienced the invader jumping out of temp Control while using it. It only happens after cleaning and I put the donut on the atty when it's still too hot. The feature with ability to Control Wattage and temp is enough to get this over the e leaf imo
 
elmoe420

elmoe420

Well-Known Member
skayleef said:
Which temp control mod works best have you guys found with the DT 2.5? I am thinking about getting the most optimal TC mod for the DT, I know he sells the eleaf and mini invader, but I have read so many terrible things about the invader, and the eleaf is an eleaf. If either of these is just A+ perfect with the DT 2.5 and DT 3.0, I would like to know!
Click to expand...

The mod I most often use with the DT 2.5 is the Sigelei 150W TC. Right now running 305 F @ 12J.

burT1bU.jpg
 
T

Thenewguy821

New Member
Through all I have read here, I am looking forward to receiving my DT2.5. Ordered the kit, with the e leaf 40w and the pyrex tip. Hope everyone had a great thanksgiving.
 
b0

b0

Cloudy...
Just noticed a really small crack in my atomizer, almost not visible. Should I stop using my DT2.5?
 
H

Humboldt69

New Member
JETSlnw said:
So can anyone tell me if all these atomizer got leaks?
Click to expand...

As long as you only put in enough for one session in the v2.5 , and cold clear it between hits, there is not any leakage. If you try storing product for later in your atty, it's going to leak through the air holes.

I'm one of those guys who fills mine for the day too. I just keep it up-right, and cold clear it, and its fine to me. Just make sure its off in your pocket.
 
Steven

Steven

Well-Known Member
kernal6500 said:
When is the version 3 coming out !?
Click to expand...
I just spoke with Matt on this matter and he informed me that a version 2.7 will be coming in 2 weeks where the air holes are ingeniously designed to come from below the donut. I'm not exactly sure when version 3 will be out but it will arrive with the dry herb atty as well
 
S

sethhobrin

Well-Known Member
Also what wattage and temp is most appropriate with the invader mini? Still having problems keeping the donut to not pop up and ruin my fun when I take hits. I am practicing taking very slow draws to try not to keep it from popping up. Is that just what needs to be done with this unit? I seen one video say to use 240/48watts and another that says 320/13 watts and unsure which is correct or if either will damage the unit.
 
sweetherb

sweetherb

Well-Known Member
sethhobrin said:
Also what wattage and temp is most appropriate with the invader mini? Still having problems keeping the donut to not pop up and ruin my fun when I take hits. I am practicing taking very slow draws to try not to keep it from popping up. Is that just what needs to be done with this unit? I seen one video say to use 240/48watts and another that says 320/13 watts and unsure which is correct or if either will damage the unit.
Click to expand...

I have had mine for quite a while now. Although I certainly do not claim to be an expert, the best setting for me has proven 13.5w and 220f. This gives nice hits without too much splatter.
 
You must log in or register to reply here.
Top Bottom