Cleaning with Isopropyl Alcohol...water wash after?

Peloton

Vapes Hard
My routine is simple.

1. Fill w/91% iso and shake/soak until walls of glass are clean.
2. Dump ISO.
3. Fill, shake, and dump 3 times with cold tap water.
4. Fill, shake, and dump last time with filtered water, or fill with same for use.

I do this daily and my glass stays brand new looking. No need for funky cleaners ever.

I do exactly this every 3-4 days, other than I don't use tap water for cleaning... I use distilled for that also. I pick up gallons of distilled on the cheap at Walmart :)
 
Peloton,

mvapes

Scratchin' Glass!
Accessory Maker
I live in an area where we have well water. Not only is it well water but it seems to be very high in minerals, great taste and good for you but stains the crap out of all my glass. In most cases I have always used 91% ISO to clean my pieces but now I notice that they stain almost instantaneously if I am not constantly on top of it (cleaning glass daily). Any ideas to help keep it clean? Also, I am noticing that its harder to clean as well - looking for whatever advice I can get. It almost looks like a mix between soap scum and water marks after a few uses. :shrug:
 
mvapes,

MrNorml

Well-Known Member
I live in an area where we have well water. Not only is it well water but it seems to be very high in minerals, great taste and good for you but stains the crap out of all my glass. In most cases I have always used 91% ISO to clean my pieces but now I notice that they stain almost instantaneously if I am not constantly on top of it (cleaning glass daily). Any ideas to help keep it clean? Also, I am noticing that its harder to clean as well - looking for whatever advice I can get. It almost looks like a mix between soap scum and water marks after a few uses. :shrug:
I use bottled water.
 
MrNorml,

mvapes

Scratchin' Glass!
Accessory Maker
Thanks guys - I will try the filtered water - I have one of those Bobbles I can use. Any rec's on removing the water stains?

And Ca5h - I am reading about your mist conditioning, I want to do something for myself - with asthma and chronic bronchitis I need the moisture.
 

Roger D

Vapor Wizard
Vinegar removes the hard water stains and clears any kind of residual odor but you got to rinse it with filtered water to keep the benefits.
I'm searching for a product for cleaning glass like t-dub is using, but around there I don't know where to find that.

I still have a lightly blurred water tool, I solved the hard water problem, but not the fast resin build up problem.. I may try the salt technique but I don't want to waste some good alcohol to do that.
 
Roger D,

SD_haze

Well-Known Member
I use bottled water.
Filtered water like brita cartridges don't stains the glass

A water filter removes things like chlorine, but that isn't what stains glass as much as the minerals. That's why they're called hard water stains, because minerals are hard :p. If you look at any bottle of water it lists minerals in the ingredients.

I'd imagine there would be LESS staining than your well water, but neither are going to keep it as clean as distilled water. Personally have a ~3-gallon distilled water dispenser in my bedroom with a spout for filling up all my glass with ease. Pretty sure it costs less than a $1 a gallon.
 
SD_haze,
  • Like
Reactions: Roger D

Nycdeisel

Well-Known Member
Bottled water is tap. Those stains are from BAD WATER. No one should drink hard water, like shitty city water like where I live.

Yes, we need to rinse with tap. But heres the solution that works. Dont let the stains buildup. Always use a post wash of Dr Bronners liquid soap, shake and rinse then do a quick vinegar wash just shake it around for a minute. rinse remainder out with tap and then do a FINAL RINSE with the good filtered water(not fucking Brita, I mean a real water filter), and dump that out. then you do a final fill with good water to use in it. If you do this every time you clean glass you will never have stains. The problem is they build up in the first place and once they get bad are super fucking stubborn. good luck and happy glass cleaning.

Wells also need to be filtered as it leaches whatever may be deep in the ground. Wells can even harvest some real nasty things like parasites.
 

MrNorml

Well-Known Member
Bottled water is tap.

Wells also need to be filtered as it leaches whatever may be deep in the ground. Wells can even harvest some real nasty things like parasites.

You are right and I was wrong - my bad! I am not supposed to drink well water and just noticed the 5-gal my wife got was and is distilled, but the bottled stuff is from one of the gazillion gal/year industrial plants local to where I am.
I am using distilled water in my glassware and clean it at least every couple days at maybe up to 10+ times a day and it is acceptable to me. Clean with 97% and salt. Rinse with well-tap-water. Fill with distilled. Works for me.
 
MrNorml,

Gammy

Gammy's getting upset!
Hey friends, I just got this beauty in the mail yesterday and i wanna clean it before using it, I'm just wondering how much salt and alcohol you guys use? Also, does normal salt do the job or does it have to be coarse salt to be effective? thanks :)


edit: here is the beaut'

_mg_8785.jpg
 
Gammy,

ilikesnacks

Well-Known Member
i wouldnt bother with salt if theres no staining at all, but i use whatever salt is around, table salt or epsom salt.
 
ilikesnacks,
  • Like
Reactions: Gammy
Yeah just pour a little of whatever salt you have. If it gets really gummed up with use you may want to use some table and some kosher salt together.
 
kingofnull,
  • Like
Reactions: Gammy

ilikesnacks

Well-Known Member
also, that piece looks beautiful!

i've never heard of anyone using vinegar before though, i might give that a shot the next time around.
 
ilikesnacks,

t-dub

Vapor Sloth
Vinegar, acetic acid, is a common household solution for removing hard water stains. Its not strong enough to do a whole lot with though . . .
 
t-dub,
  • Like
Reactions: turk

fluge

Well-Known Member
I like to do the typical wash with ISO. Afterwards, I put a tiny dollop of dish washing detergent in (the gel kind). I shake it up and wash the outside of the glass with my hands and suds. I thoroughly rinse afterwards. I've found the detergent really brings back the shine to the glass.
 
fluge,
  • Like
Reactions: Stu

JRR22611

Well-Known Member
My routine is simple.

1. Fill w/91% iso and shake/soak until walls of glass are clean.
2. Dump ISO.
3. Fill, shake, and dump 3 times with cold tap water.
4. Fill, shake, and dump last time with filtered water, or fill with same for use.

I do this daily and my glass stays brand new looking. No need for funky cleaners ever.


Is there a specific reason you rinse with cold water?
I ask because I'm preserving an oz of rub hash, used your exact method except with hot water to thoroughly rinse the jar.
Do you think the water temp makes a difference when you want to rid the glass of that nasty ISO stink?
 
JRR22611,

Bongologist

JoJo Woodworks
Accessory Maker
@JRR22611 fyi this thread is years old and that person may not reply or even be active anymore.

I have switched from ISO to PBW but when I used ISO I never found that water temp mattered when rinsing.
 
Bongologist,

John Coaltrain

Well-Known Member
. . . it seems like the water would just lengthen the drying time tenfold (since 99% evaporates so quickly)

This issue has been on my mind for some time. It seems like a good idea to rinse with water any iso-cleaned glass – but the water does seem to take forever to evaporate – much slower than isopropyl alcohol.

Luckily, both my Solo II and Fury 2 stems are borosilicate glass, and this glass is microwave safe. I just put them in the microwave for 30 seconds or so, and this evaporates any water caught in the curvature or screen area.
 

Madri-Gal

Child Of The Revolution
This issue has been on my mind for some time. It seems like a good idea to rinse with water any iso-cleaned glass – but the water does seem to take forever to evaporate – much slower than isopropyl alcohol.

Luckily, both my Solo II and Fury 2 stems are borosilicate glass, and this glass is microwave safe. I just put them in the microwave for 30 seconds or so, and this evaporates any water caught in the curvature or screen area.
Thank you, @John Coaltrain. I like to clean my glass stems for Solo and Air daily, but this has meant doing it before bed so they can dry. Now I know I can clean them when convenient, just pop them in the microwave.
 
Top Bottom