Discontinued The Grasshopper
- Thread starter midgetsanchez
- Start date
Averyminya
Grasshopper Backer
Due to liability, she couldn't tell me.
I went ahead and charged one anyway, since I know other users have been okay. I haven't had a chance to use it yet, but technically it's a no I think is what that means.
I charged 1 Hopper Labs battery with 1 18650 battery from the Arizer Air. No explosion, at the very least
Edit: @Bass Vaper yeah it can become a little excessive. Having an external charger and extra batteries helps a lot though. I ordered 2 more batteries from them because I think 4 will be a perfect amount.
Nube Scrutator
Cloud Searcher...
I've been using a Nitecore i4 for almost 3 months with no issues.
TheWhisper
Well-Known Member
Averyminya
Grasshopper Backer
Is it safe to charge one battery? It says the i4 defaults at 750 mAh for one battery, which is the same amount as the Hopper battery, but the manual recommends charging 2 batteries at a time for smaller ones....I've been using a Nitecore i4 for almost 3 months with no issues.
I don't know much of anything beyond voltage, and never learned about mAhs and how rechargables work.
Since I only have 2 at the moment it'd be nice to not have to charge the Hopper Labs battery with my Air's 18650 (which worked great by the way.)
@Ratchett I had a question about the doob tube on your website. With the dimensions of the tube and the dimensions of the Grasshopper, would it possible to pour your herbs directly from the tube into the Grasshopper chamber in order to load it? I'm really bad at loading my devices without spilling any product(I know you have a loading funnel for sale also but I'd prefer not have to carry that around with me too) so it would be cool if the tube is narrow enough to fit directly into the Grasshopper chamber so I could just tilt the tube as necessary to load. Even I couldn't mess that setup up!
Nube Scrutator
Cloud Searcher...
@Averyminya, I always charge multiple Hopper batteries at a time.
This toothpick holder fits inside the Grasshoper's chamber:
http://www.amazon.com/Pocket-Stainless-Steel-Toothpick-Holder/dp/B000F7U8UU
This toothpick holder fits inside the Grasshoper's chamber:
http://www.amazon.com/Pocket-Stainless-Steel-Toothpick-Holder/dp/B000F7U8UU
JiggyJack
Well-Known Member
Yes! I forgot to mention/investigate that I'd thought I'd noticed being able to adjust the temp mid flow. I haven't experimented with it more yet though.
And thanks for passing on the clicking noise confirmation.
grokit
well-worn member
As far as the niteore chargers go, I think the 4-bay models need to charge in pairs, but the 2-bay models will charge individual batteries even different types simultaneously. I'm pretty sure this is the case anyways.
Justpassedu
Well-Known Member
4-bay's will charge a single cell no problem .
Bass Vaper
Well-Known Member
My buddy left for family visits out of town, loaned me the Hopper 
I haven't heard any clicking noise while charging. Odd that there are these nuances among devices.
Does the battery charge when NOT in the actual Hopper device? Like if you just had the battery snapped on (magnetized) to the Hopper's charger cap? Sorry if that's a dumb question, had to ask. I don't know shit about electrical type stuff.
I haven't heard any clicking noise while charging. Odd that there are these nuances among devices.
Does the battery charge when NOT in the actual Hopper device? Like if you just had the battery snapped on (magnetized) to the Hopper's charger cap? Sorry if that's a dumb question, had to ask. I don't know shit about electrical type stuff.
Mr. Niceguy
Well-Known Member
The Doob Tubes diameter is 15.5 mm (0.61 inches). This is slightly bigger than the diameter of the Grasshopper - however in testing I found that I could easily load the hopper by resting the tube on the edge of the hopper and rotating the doob tube slowly (rotating encouraged the herb to gently roll out of the tube).
In practice, it worked better than I was expecting! It's not perfect, but for loading the vaporizer on the go, it worked pretty well
Haha, damn you guys are fast.
Yes! I'm happy to announce I have partnered with an old leather worker to make leather cases designed specifically for the grasshopper using real american leather. 100% made in america, it doesn't get more authentic than these cases.
The case is designed to hold one grasshopper, plus two spare batteries, a poker tool(s), and one doob-tube (included with the case). Additionally there's a slightly larger pocket for anything else. We wanted to make the case small enough so it can fit comfortably into your pocket, hence why there's no space for the charging cord.
Averyminya
Grasshopper Backer
I do this exact thing with scooping herb in the Grasshopper and using the mouthpiece. Works wonders, possibly the easiest way to pack it.
The Doob Tubes diameter is 15.5 mm (0.61 inches). This is slightly bigger than the diameter of the Grasshopper - however in testing I found that I could easily load the hopper by resting the tube on the edge of the hopper and rotating the doob tube slowly (rotating encouraged the herb to gently roll out of the tube).
In practice, it worked better than I was expecting! It's not perfect, but for loading the vaporizer on the go, it worked pretty well
Haha, damn you guys are fast.
Yes! I'm happy to announce I have partnered with an old leather worker to make leather cases designed specifically for the grasshopper using real american leather. 100% made in america, it doesn't get more authentic than these cases.
The case is designed to hold one grasshopper, plus two spare batteries, a poker tool(s), and one doob-tube (included with the case). Additionally there's a slightly larger pocket for anything else. We wanted to make the case small enough so it can fit comfortably into your pocket, hence why there's no space for the charging cord.
http://www.aliexpress.com/item/Arti...-Pencil-Case-Pouch-Purse-Bag/32506797743.html here is a nice leather cover for your grasshopper. it measures 5.90 in. by 1.18 in. a little bigger and cheap. the sight is safe to buy
Last edited by a moderator:
Flyingcrocodile46
Well-Known Member
Or for the price of a stainless Grasshopper you could have something like this made.
Holds 30 grams of tobacco (or what have you) comfortably along with a grasshopper, a couple of spare batteries, a dozen business cards, half a dozen credit cards, drivers license, half a dozen membership/discount cards, a couple of hundred in cash, a slim lighter, cigarette papers, filters, fold-able scissors, a flat fold-able knife, a half a hacksaw blade, a wire saw/Garrot and a note book/pad. But is not petite. (makes for a big bulging pocket)
Holds 30 grams of tobacco (or what have you) comfortably along with a grasshopper, a couple of spare batteries, a dozen business cards, half a dozen credit cards, drivers license, half a dozen membership/discount cards, a couple of hundred in cash, a slim lighter, cigarette papers, filters, fold-able scissors, a flat fold-able knife, a half a hacksaw blade, a wire saw/Garrot and a note book/pad. But is not petite. (makes for a big bulging pocket)
blankexpression
Well-Known Member
Does it have space for my waffle iron?
Kalessin
Well-Known Member
I really like @Flyingcrocodile46's case, but it is just a bit overkill for me, I would never have a need for half that space
Flyingcrocodile46
Well-Known Member
Yeah! i can certainly appreciate that it's overkill for many. The attraction is commensurate to the desire to have ALL of the assorted junk that it is designed to hold. For me it hits the spot perfectly.
The point of the post is more to highlight the advantages of personalising your case (if you have more junk that you could integrate into it). I can imagine lots of possibilities. Also, there is a whole other buzz to be gained by personalising your shit.
Lol No. But I did forget that it also holds a credit card desk lamp and a couple of small flat multi tool doohickeys, some toothpicks and half a dozen bandaids as well. ;-)
I'm sure that some of the many international craftspeople on Etsy could customise a bum bag or handbag for your grasshopper waffle iron needs.
Last edited by a moderator:
inuhuion
Well-Known Member
Anyone have any better pocketable, NO SPILL suggestions for a grasshopper bubbler other than these:?
http://www.vapesandpapes.com/products/bubbler-mini-king-size-no-spill
http://www.dhgate.com/product/glass-atomizer-ash-catcher-dry-herb-vaporizer/213068750.html
http://www.afrosmoke.com/Chameleon-Monsoon-Spill-Proof-BMultiple-Colorsb_p_1346.html
i already have a pinnacle pro water tool but it's not spill proof and i'm looking for something that i can carry in my pocket but already have water in it, ready to go.
http://www.vapesandpapes.com/products/bubbler-mini-king-size-no-spill
http://www.dhgate.com/product/glass-atomizer-ash-catcher-dry-herb-vaporizer/213068750.html
http://www.afrosmoke.com/Chameleon-Monsoon-Spill-Proof-BMultiple-Colorsb_p_1346.html
i already have a pinnacle pro water tool but it's not spill proof and i'm looking for something that i can carry in my pocket but already have water in it, ready to go.