Discontinued Haze Dual V3

Juleslee21

Juleslee21

Vapor Enthusiast
getochkn said:
Does anyone else's charger make a small, quiet chirping sound if you put your ear up to it like every second or so when batteries are charging? I don't notice it, but my GF doesn't and I'm not allowed to charge batteries over night now because it drives her crazy.
Click to expand...
A very small one. I had to hold my ear right next to it to even tell. I never even noticed before you posted this. I sit right next to mine and have never noticed this as being a problem.
Enless your GF has like super hearing.
 
Juleslee21,
Toolhead777

Toolhead777

Member
Hot Dog Day 187 said:
Don't have my haze yet (YET!!!), but certain chargers I definitely notice this with, some chargers make extremely high pitch chirps on the charge cycles, most humans probably couldn't hear it but younger people and people with more sensitive hearing will notice it.


you can charge the Haze brand batteries with 18650 compatible chargers, can't you? if you can, i would say just get a different charger.
Click to expand...
Mine also makes that noise.
 
Toolhead777,
ean

ean

Well-Known Member
subway13029 said:
So i am absolutely devastated..i had purchased a haze canister case from ratchett in gqtor blue and loaded all 3 of my herb cans and two concentrate canisters and both of my stems and headed out for a great florida georgia cocktail party and needless to say when we went to celebrate with some nice haze vapor i realized my case was gone..so i sit here now with no stems and no cans of either sort..i have other vapes but i am super tight in cash right now and no way to use my number ine go vape..and yesterday was national sandwich day i workd open to close and must hqve given away 400 sandwiches and couldnt even sneak off and hit mr stealth..
Click to expand...
I had that problem, and for my old 2.5 a mcdonalds straw fit perfectly into the haze.
 
mikeben

mikeben

Well-Known Member
Ed's TNT is working on my African Blackwood stem. I can hardly wait for that and the Wong! I guess the 2.5 was very different stem wise, never had one, but I love the glass one now, and I am sure I will love my wood one. The steel just gets too hot for me, but it is made really well.
 
PDwasmy1st

PDwasmy1st

Well-Known Member
PDwasmy1st,
mikeben

mikeben

Well-Known Member
PDwasmy1st said:
I am thinking about getting 1 of these , wanted to no is there is any small glass Bubbler's that will currently attach straight on the Haze no problems? like the one's below

Secondly i have seen somwhere that you can use the Haze V3 with E liquids is that correct?
http://www.aliexpress.com/item/Glas...zer-Pen-Glass-Attachment-Dry/32338478428.html
Click to expand...
You can use e liquids easily with it, but that is one of many things this vape does. The pens have no measurements but the stems are thin and made for the Haze specifically. However..there are plenty of small 14 mm quality pieces you can use it with it. People on here make great things for Haze's get a Delta 3D nu song or an ED's TNT wong and you are set.
 
mikeben,
PDwasmy1st

PDwasmy1st

Well-Known Member
mikeben said:
You can use e liquids easily with it, but that is one of many things this vape does. The pens have no measurements but the stems are thin and made for the Haze specifically. However..there are plenty of small 14 mm quality pieces you can use it with it. People on here make great things for Haze's get a Delta 3D nu song or an ED's TNT wong and you are set.
Click to expand...
i just want a small portable glass water 1, i don't think they are. plus they are wood. so i probably need measurements of the Haze v3 and measurements of a small water attachment.... i've seen them somehwere, links on FC the lot .
 
PDwasmy1st,
PDwasmy1st

PDwasmy1st

Well-Known Member
@scottg402 What extras do you think i should get with the Haze V3:

Does the glass tube break a little easy? can it come off easy so i have accidents? is it made with toughened glass? [think i'd use metal one outside unless on grass]

Should i get more than the 2 batteries you get with it? life span? [only want a 1 hours worth everyday]
Should i get more convection screens? or canisters? or concentration cans? are they sturdy the cans?

I understand this is a new vape so it's mostly educated guess work e.g others may have used similar accessories that are in this vape before.
 
PDwasmy1st,
  • Like
Reactions: scottg402
scottg402

scottg402

Well-Known Member
PDwasmy1st said:
@scottg402 What extras do you think i should get with the Haze V3:

Does the glass tube break a little easy? can it come off easy so i have accidents? is it made with toughened glass? [think i'd use metal one outside unless on grass]

Should i get more than the 2 batteries you get with it? life span? [only want a 1 hours worth everyday]
Should i get more convection screens? or canisters? or concentration cans? are they sturdy the cans?

I understand this is a new vape so it's mostly educated guess work e.g others may have used similar accessories that are in this vape before.
Click to expand...

Hi PD,

Glass is glass. You drop it on tile and it's likely to break. I prefer SS for that reason alone. I have dropped some and they break and others have not. There is a bit of tolerance there so I can't really comment on the durability beyond that.

It comes with two batteries. You should get 45-60 minutes of vape time depending on your heat settings and vaping style. The Haze doesn't perform well on low batteries so keep that in mind.

You get two cans and four screens. I would recommend you figure out what you like and order more later if you need. We offer free shipping on anything so there is no advantage to buying them ahead of time.

As for accessories. There is a ton of information here. I would recommend a case of some sort (we sell an awesome one for the Haze and it's parts). Beyond that I think a water pipe attachment is also a good buy. We carry the @Ed's TnT adapter and you can also check out the NU-SonG from @Ratchett that fits right over the mouthpiece stem.

When you are ready to buy you can shoot me a PM and I will take care of you.

Thanks for your interest!
 
Last edited:
UnshavenFish

UnshavenFish

Well-Known Member
bonez said:
@UnshavenFish

So the battery charger for my haze will work with the arizer air batterys?
Click to expand...

Yeah should have no problems with air cells, it would be quicker to charge one cell in the air than the haze charger but that can be offset against being able to charge two at once, without doing the maths your probably looking around two hours in the air to charge one cell or around four hours to charge two in haze charger but with the ability to use the air while charging cells at the same time.

Although the air and haze cells are different in most aspects they behave the same way as far as charging goes, I believe @scottg402 has used his haze charger for his air cells once (I could be remembering this wrong though :shrug:) anyway I would still advise basic battery safety, things like...

Don't leave fully charged cells in the charger (ideally remove within an hour)
If they ever feel hot to touch remove them from the charger, warm is fine but hot is a warning,
If the cell has just been used give it 10 mins before charging, and if just charged give 10 mins before use,
Don't charge in silly places like on a pile of paper or next to a bottle of gas,
Don't store cells full or empty for extended time (around a half charge is ideal for storage)

This is what I would consider basic charging safety, and should avoid any (very unlikely) problems from happening.

I should also add a big IMO to this post in general

And also a trusted site as reference...

http://batteryuniversity.com/learn/article/charging_lithium_ion_batteries

Anyway the important thing is the haze and air cells both charge to 4.20v so while charge time will vary the process is the same.
 
mixchu69

mixchu69

Well-Known Member
Had my first session with the v3 and am impressed. Used one conduction and one convection screen and got thick vapor that kicked my ass (very rare with my tolerance).One question: being careful, still found some specks in the bowl after I dumped the screens and abv. Will I encounter problems down the road if a few specks of abv make it into the holes in the bowl? I can see the benefits of the cans, but I really like the convection screen.
 
mikeben

mikeben

Well-Known Member
mixchu69 said:
Had my first session with the v3 and am impressed. Used one conduction and one convection screen and got thick vapor that kicked my ass (very rare with my tolerance).One question: being careful, still found some specks in the bowl after I dumped the screens and abv. Will I encounter problems down the road if a few specks of abv make it into the holes in the bowl? I can see the benefits of the cans, but I really like the convection screen.
Click to expand...
I like the screens best too for herb, though the cans are fantastic for concentrates. Don't worry about a spec, just use the brush you get to brush out the bowl of any crumbs. For the side holes clean it with iso and a thin pipe cleaner every so often, just open their ovens at the top. For the bottom hole use a straw to suck out any abv if you see a big piece fall down.

@PDwasmy1st

With the two batteries you usually will always have a working Haze but I ordered 2 XL and don't regret it. Having the 2 XL in rotation I'm never without a Haze. I have the 2 regular ready if I need back up, but have not yet. They work longer and hotter and don't take much longer to charge. As far as accessories, you are going to know what you like it for best really fast. The screens and cans are sturdy, but I suggest getting at least one extra packet extra of cans, convection, and conduction screens. That's just me, I like having a lot to rotate.
 
scottg402

scottg402

Well-Known Member
Thanks gentlemen! I don't do all this for the recognition. I sincerely have an appreciation for helping people. That said it is nice to know that people notice the difference. I think we have a pretty sweet product but honestly that doesn't matter if the service isn't there to back it up. That's my philosophy anyway.....

Happy Friday Everyone! Looking for some nice weather in the near future. It's been raining a lot around here lately or shall I say it's been pretty Hazy! :)
 
Enchantre

Enchantre

Oil Painter
I'm working on the video. I really am. I'm struggling with an Android phone camera and Windows for editing. It's futsy and laborious, and the fucker crashed on me last night!

I like it. A lot. I should have the video done this evening, after work (sorry, must job today)...

So far, conduction screens for the win. And grinding is not required for conduction! :)
 
play2GETpaidTUESDAYStoned

play2GETpaidTUESDAYStoned

Unapproved commercial account.
@ Hot Dog Day 187,

turns out sir, you also have great taste. I too am considering a haze 3.0


I do not currently do concentrates at this point. I did not PICK UP VAPING to help me quit smoking, but I'm an expert black belt at tobacco and how to quit.

I think for $250, it's a good unit to have. I obviously am CONVINCED my Inhalater's will all go GO GO GADGET self destruct, though they have not yet done so, but if I were to go banana's and order something OTHER than another 4 of those, it's these I'd go for.

haze me sir, go ahead, see if I care. Let's have an impromptu hot dog eating contest some time too!
 
Hot Dog Day 187

Hot Dog Day 187

Well-Known Member
@play2GETpaidTUESDAYStoned I'll post my thoughts about the Haze v3 when it shows up. I'll even compare it to my memories of the Inhalater 05 just for you. should be any day now, i'm getting impatient!


i also do not do concentrates right now even though i have access to them, i have decided i just dont like them as much. i get hash once in a while though and have friends with many more concentrates than i so having an option to do concentrates properly is really appreciated.

Enchantre said:
I'm working on the video. I really am. I'm struggling with an Android phone camera and Windows for editing. It's futsy and laborious, and the fucker crashed on me last night!

I like it. A lot. I should have the video done this evening, after work (sorry, must job today)...

So far, conduction screens for the win. And grinding is not required for conduction! :)
Click to expand...


very glad to hear this as the conduction screen kind of were more appealing to me. really excited to load one conduction and one convection screen and do them back to back.
 
Last edited:
PDwasmy1st

PDwasmy1st

Well-Known Member
scottg402 said:
Hi PD,

As for accessories. There is a ton of information here. I would recommend a case of some sort (we sell an awesome one for the Haze and it's parts). Beyond that I think a water pipe attachment is also a good buy. We carry the @Ed's TnT adapter and you can also check out the NU-SonG from @Ratchett that fits right over the mouthpiece stem.

When you are ready to buy you can shoot me a PM and I will take care of you.

Thanks for your interest!
Click to expand...

Thanks for your answers Scott

So the batteries work well for 45 minutes and not so well after that for the last 15?

Is it free postage to the UK?

Are there any bonus codes? for FC peep's

What's your price for it? [i was looking at somewhere else cos it's in UK namastevape]

If there's a fault who pays return postage is there a returns form with it?
 
PDwasmy1st,
G

getochkn

Well-Known Member
So I have a nice RedEye glass piece that I use for dabs, and then I noticed my Arizer V-Tower's bowl is 18mm, same as my glass. Then I notice the tubing coming from the Arizer's mouth piece fits perfectly over the Haze's stem, and the result....................


2qw1jqf.jpg




Yes I could make the tubing shorter but it's easy to pass back and forth this way and didn't cost me anything, already have the Arizer parts and the RedEye.
 
You must log in or register to reply here.
Top Bottom